How to Install a Magnetic Switch for LED Lighting in Cabinets and Drawers | Inspired LED
ฝัง
- เผยแพร่เมื่อ 23 เม.ย. 2014
- This specific item is no longer being sold by Inspired LED. Please check out Inspired LED's Newly Released Magnetic Switch here : www.inspiredled.com/product/l...
Inspired LED's magnetic switch allows you to turn your lights on and off simply by opening and closing your cabinet doors. Perfect for in-cabinet areas that need a bit of illumination, such as pantries, silverware drawers, and under sinks.
Read more about our magnetic switch here: inspiredled.com/blog/video-mag...
Contact us with any additional questions!
Email: orders@inspiredled.com
Phone: 480-941-4286 - วิทยาศาสตร์และเทคโนโลยี
This is exactly what I have been looking for, for my tool box thanks a lot man!
Great video!
This is so cool! Could you do an example of a three way magnetic switch, i.e. two magnetic switches being able to control the same led light source.
I'm a beginner so this is very helpful. Thank you.
Finaly a short but excellemt explanation
Not exactly what im looking for (looking for car related ones) but dam this gives me ideas
I'm a kitchen installer and I would like to use this in my projects. I live in Toronto do you know where I can purchase these or where I can find vendors who sell them?
Hi,
can I connect the switch to a normal led bulb?
If running off a power pack would having the led controller on but the lights off drain the batteries quick? Thinking of using this for a portable tool cart
Hi, how would this circuit work of I was to install an on/off switch? Looking to do a DIY lightsabers hilt but wanting to create a set up with allows me to remove the chassis and when the chassis is re-installed I don't need to connect wires back u because of the magnetic contact and still only be powered up by the on/off switch, any help would be greatly appreciated.
Where do I find the single in-cabinet bulb used in the demo?
thanks that really helped me out
i just want to make one like this but without those magnetic switch any suggestions???
So in this setup a transformer would be permanently on to supply the correct voltage to the leds? Not great/
Hey, this is what I am looking for, as I want to build a game for the nature centre. I need to place an 8x10 x1/2 inch info pad into a cutout square..but I only want the right answer to LIGHT UP, not shut off, which I hope is possible? (the led light will go back to the right answer info block) ...is there a more flat magnet set up I could use for this purpose? Also, what plugin do I use and that centerpiece please, I will need to get those!:) We need a plug-in so it works longer for the kids, but we also could use a battery for each light set up. I need to set up 4 lights, so is there a 4 way splitter I could use, but still only have one light on at a time, or all lights when all are correct answers? Or do I use an individual pack for each light? Thank you!
what power spec. you suggest for 5m led strip.
Can it be wired in the normally open position?
Amaaazing!
What do I do if I need more amps then what the switch can handle
I need that magnetic switch with the middle adapter where can i find it
I need switch
just the magnetic switch is sold, how do i create the setup shown here though? i like how the two wires go to the adapter, is there a parts list?
+Christian Perez Hi Christian, our magnetic switches are specially modified at our manufacturing facility in Arizona to include the wires and cable-adapter shown in the video above, this is how the switch will arrive upon purchase. While the image on our website does display the bare switch, it is always sold with this adapter pre-connected for your convenience. Once you have your switch, cables, LED lights, and 1 AMP power supply, installation will be as simple as plug & play!
Epic!
I recently saw a video in kickstarter that a lamp turns on when magnets attract each other, and off when they're apart. Is there a component that can do that? Magnetic switches do exactly the opposite (pass current when apart)
The Switch can be put in an "opposite" position so that it functions the way you described. The above switch is no longer in stock, please refer to the link in the description above for Inspired LED's newest version of the Magnetic Switch. The switch will have to be modified before ordering and shipping, so please call us with any questions 480-941-4286!
thanks! do u have international shipping?
This may fit my needs. However, 3 questions: (1) is the switch available in other colors besides Ivory? I am installing in a dark wood cabinet, and Ivory would stand out like a sore thumb. (2) I need a MUCH longer distance from the switch to the LED lights than the short (I'm guessing 6-12") length of your adapter cable. In all, I probably need a length of about 6-8' from the switch to the power source, so double that cable length. (3) I assume I can easily put two of these in a circuit - in other words, think of two doors, with the switch working if either or both doors are open.
+conserbitarian We do have a limited quantity of the switches in the black. I highly recommend shooting an email over for confirmation on the configuration that you have described. It should work, but to accommodate the correct cable lengths needed it would be best for you to reach out to our free design services! www.inspiredled.com/design-service
What sort of power/wire is needed to connect to the first lead that brings power to the switch?
I want to have a configuration where I add a wall switch after a GFI outlet to power a vanity light. After connecting to the vanity light, I want to have a light inside a recessed medicine cabinet that only turns on when the door is open (if the wall switch is on). I believe the vanity light needs something like 14/3 wire or 12/3.
Thank you for contacting us in regards to our Magnetic Switch. This specific accessory operates on low-voltage lighting systems, between 12V and 24V. In order for you to incorporate it into your system we will need to ensure the vanity light and recessed medicine cabinet are low-voltage lighting fixtures. We would be happy to assist you with this lighting configuration. We recommend emailing our Design Team directly and they can come up with a layout for you. Please send images and corresponding dimensions to design@inspiredled.com. From there, our incredible designers will create a free installation guide for you, itemized list of products, and all corresponding spec sheets. We look forward to working with you!
the connection on my power supply lead is female and male on my flexible LED strip. so I will need a magnetic switch lead with male and female connections. do you guys have that?
Rob, if you are trying to pair the magnetic switch with another companies products it is best to send us a photo of the parts you are working with to determine what is needed, and to ensure the plug size is the same! Contact information is listed in the description above!
Hi. Would your switch and connection sizes work with the Ikea Dioder series of LED light strips? I imagine using their, 12v .42a power supply
Unfortunately Ikea does not provide enough specifications on their product details for us to determine if the connector sizes would work.
Inspired LED connectors are 1.3, the same as yours I believe. Well, the barrel connector at the end of the power supply cable that feeds their led splitter is 1.3 - I took it to Frys to find the size :)
As long as the power supply is 12V or 24V with a 3.5mm x 1.3 mm barrel connector it should work! We are always more than happen to accept returns if it doesn't work out!
Inspired LED, ok, great. let me get a better photo to send you to make sure, and voltages, so we can avoid returns. Where’s the best place to send the info?
Email any info over to orders@inspiredled.com and the customer service team will be happy to assist you!
Is there a way for this to be done in reverse, I mean, turn the lights on when the magnets are together? I need this for a helmet I am creating and I need the lights on when the helmet is put in place. Thanks in advance.
Hi @ELBSpeakingEnglish! The Magnetic Switch is available in the reversed setting! Feel free to visit our website or reach out to us directly to place that order! -Inspired LED
orders@inspiredled.com
Can you use several switches to turn on/off one set of lights?
+Cameron Fast Of course. This will require a bit more electrical knowledge than is typically had by someone who asks that question (I promise I don't mean offense at that). Understand that daisy-chaining the switches wouldn't work, because you would then have to have every door open for light. The simplest (I say this, but it can still be dangerous!!) is to split the power a few times, and then run it through each of these switches, and then reconnect the line at the other end of the switches back into a single line. Then, whenever you open any of the doors, the circuit is made, and you have light! I recommend you get an electrition friend before you do this though, cause house fires and electrocution typically is best avoided. Happy zaps!
Can you reverse the effect? Have the lights come on as the magnetic switch makes contact then go out when contact is broken?
+Daniel Fleming Yes you can reverse the effect - this will require an easy manipulation of the wiring - on our website the spec sheet directions indicate the reverse wiring : www.inspiredled.com/products/lights-and-accessories/dimmers-and-switches/magnetic-switch
This is exactly what I'm looking to do. I bought a magnetic switch but can't find the necessary hardware i.e. magnetic switch lead and accompanying connectors! Any help would be greatly appreciated. Thanks Spencer
Spencer, did you buy the switch from us? We make our switch with the compatible adapter to fit with our cables. If you are handy with soldering that would be the only way to attach a connector onto the lead of the magnetic switch. Let me know if you have further questions 480-941-4286 or orders@inspiredled.com!
- Erica
good
Is the single light shown in the glass door cabinet at the end available on your site? Maybe I'm overlooking something?
+Alan Jagessar The light you have mentioned in the above video has been discontinued. We apologize for any inconvenience.
So essentially you have to order the whole set up to get the magnetic switch? Or can I just order the magnetic switch as seen in the video by itself? Cuz I don't see it on your website anywhere.
Jarrod we sell the magnetic switch alone, but at the description says above this specific model is no longer being sold. The link above should take you to the newer Magnetic Switch we are currently selling.
Inspired LED: seems how I have a fixed lead coming off of my LED light with a male end and the prongs that go around it, will that work with your new setup or would I need to find an adapter?
DO you know the size of the male end?
I believe it's 3.5mm
Jarrod, If you could supply a photo of your connector to us that would be the best way to determine if it will work!
where can I buy this items?
i am based in UK
+P K Bohra I have found a simple and reliable replacement on Amazon.com which ships to the UK (link at bottom of reply) and B&H should have a few similar items. If you do not have a big B&H near you, I would ask any local truck garage. Ask them for the magnetic connector that sits on the rear window that engages a light when turned on. They should be able to order you a good one :). Link: www.amazon.com/Directed-Electronics-8601-Magnetic-Switch/dp/B0009SUF08/ref=pd_sim_469_1?ie=UTF8&dpID=41DVM6RPZAL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0M4VPRH2BR75WEYCF2F1
Could you make a switch where the light turns ON when the magnets connect? I'm trying to work on something where this happens.
Aaron, yes we can make the switch to function in the opposite way as we have shown. For this to happen I would suggest calling and placing your order over the phone to confirm the required set-up. Please also note that our NEW Magnetic Switch is currently available : th-cam.com/video/pS6PGaz8FPo/w-d-xo.html
Can this switch wired to work the other way around? Turns on when the door is closed??
Hi Reniely! Yes, we can reverse the function for you so that the lights are on when the door is closed. This is something we would need to customize for you before shipment at no additional charge. Give us a call and place your order over the phone in order to make this request. -Inspired LED (480) 941-4286
Do you have a UK stockist?
Hello,
We do not specifically have a UK stockist, but you can contact our world wide distributor Mouser Electronics. They sell a majority of our products! Please let us know if you have any other questions!
- Inspired LED
Would that type of switch be considered Normally open (N/O) or Normally Closed (N/C). Because the magnets are usually together ( doors are usually closed), would it be N/O?
John Weber have you gotten an answer yet? I’m curious about the same question too
Did some research and this would be considered a normally open switch
where do I find this setup?
+jeff gilbreath Thanks for your interest in our products! The magnetic switch is available here through our website: www.inspiredled.com/products/lights-and-accessories/dimmers-and-switches/magnetic-switch . This switch is compatible with any of our LED panels or flexible LED strips, cables, and 1AMP plug-in power supplies, also available at www.inspiredled.com .
The magnetic switch is connected to an adapter? what`s that adapters name?
ID like to know as well, trying to find that the past week
+djdenny13 The connector is known as our Cable Extender - this is a female 3.5mm X 1.3mm jack.
Power supply / source plugged into wall outlet ?
Hello Aztec Arts. Yes, for a Magnetic Switch system it will require a Plug-In Power Supply that uses a standard electrical outlet. The power supply steps the 120V input down to the appropriate low-voltage 12VDC that our systems run off of. Please let us know if you have any additional questions!
Does anyone know the name of the coupler Female to Female with cable connection to the magnetic switch?
Hi Ivan, this is a custom add-on manufactured exclusively for Inspired LED. Essentially, it is a 22 AWG cable soldered directly to one of our 3.5 x 1.3mm cable extender blocks, and paired with every magnetic switch sold through our facility. Unfortunately, as this component is part of a product set, it is not available for individual sale, however, it will be automatically included with any magnetic switch purchased from Inspired LED. (Available on our website here: www.inspiredled.com/products/lights-and-accessories/dimmers-and-switches/magnetic-switch )
Thank you. I will check it out on your website
Can you actually revers what you have demonstrated.
Example - turn power or light off when opening the door?
This is for a number plate light that comes on when lights are turned on but if a trundle tray under the Ute tray is opened the light obviously turns off.
Reason being the trundle tray under the Ute is as long as the Ute tray length.
There is no way wires can be not be in the way and therefore be tangled up when closed.
Hence a more convenient way of lighting number plate.
I’m assuming reversing wires polarity?
Thank you in advance.
Hi Peter! Yes, we can reverse the function of the Magnetic Switch for you. It is actually an alterations we have to make to the internal PC board. This customization can be made before shipment at no charge. Feel free to place your order over the phone and request this alteration. Our number is 480-941-4286. Thank you! -Inspired LED
what is the buying link and price.
Jan the product link can be found here: www.inspiredled.com/products/lights-and-accessories/dimmers-and-switches/inspired-led-magnetic-switch and the price is $20
You can also find these on Amazon
Im installing LED strip lights to my toolbox, only difference is that I'm using a 12V battery in place for a power source
Could you share how yo do it with 12v battery? I'm looking to use led light switch that just uses 3aa batteries but uses a switch like this for my truck cargo area. Thanks for any help.
Can use this switch for 20w bulbs
Possibly! Would you mind providing the make and manufacturer or the 20W bulbs? Feel free to email orders@inspiredled.com directly and we can help you out. We look forward to working with you. -Inspired LED
This magnetic switch is NA or NC..??
Both
As I can see, this reed switch is not designed for power supply voltage. It can be operated with 48Volts max. So, this system needs to run a power supply unit 12V all the time (as a stand by). That means, an extra power consumption and extra bills for electricity... That`s not too effective as I see. Can it be designed for a full power cut (220 or 240 volts), please? I think the magnetic switch must be different.
Can this work with 12v DC?
Yes, the switch will work with a 12V DC power supply 2amps or smaller.
i want to use this for car armrest for glow of LED light....can u share your email id i need you help
Can this be wired for 110?
Hi Dizzy Llama! The Magnetic Switch is a low-voltage accessory meant to be used with a 12-24V DC Plug-in Power Supply or 12-24V DC hardwire dimmable transformer, which lowers your house voltage from 110V to the LED friendly 12V. Please reach out if you have any further questions. -Inspired LED
Dont believe other, i have installed on kitchen drawer ( pull out)
NO ( Normally OPEN) - No magnet, light up, suitable for drawer as you pull out, the led light up, when drawer close, the magnet is contact with each other, then light off ...
installation very simple, just follow my guide below
1. from 220-240V ---> 12V power adapter --> Ground (-) connected to led strip light, then 12v power positive (+) connect to NO and COM to LED (+). You're done
NC (Normally CLOSE) - Reverse from above... light up when magnet is near.
I need this, but the fucking link is broke. I need one with an adapter like that.
I did it myself with the Woodglut plans. I think this is the best way to find out how to build it.
Hey there....I stay in the netherlands and I really wanted one of these.....i wanted to know if I can prototype this with a reed switch to turn the light on and off (i am thinking of using one of these)
www.conrad.com/ce/en/product/503528/PIC-MS-324-3-Reed-Sensor-1-Closer-1-A-10-W/?ref=detview1&rt=detview1&rb=1
+Pranav B
A reed switch can absolutely be used to control your lights. There are two things
to consider when choosing a reed switch:
Contact ratings - can the it handle the
voltage and current that you want to switch?
Contact configuration - is the switch
normally open or normally closed? This will be application specific, but
typically you will want a normally closed switch so that when the magnet is
removed the lights turn on.
That particular switch should be able to handle up to 1A of current, but the contact
configuration was not explicitly stated. My best guess would be normally open.
+Inspired LED ...Thanx a lot man.....so if I want to light up a strip of led's....what current rating reed sensor should I buy....
in your website u mention a current less than 2A is allowable for leds
Our Magnetic switch is rated for 2A on a 12V system. Depending on the lighting you are running should determine the Amps you need for power. You will just need to ensure the switch you are looking at will fit into those requirements!
I have the same magnet switch but power-ON when they are close to each other. How to change power-ON when they are apart?
Hi @TheNekry1! Contact our Customer Service Team and we will get you set up with a brand new, reversed Magnetic Switch - orders@inspiredled.com. -Inspired LED