Syntrx II complete video manual!!

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ม.ค. 2025

ความคิดเห็น • 42

  • @deckling823
    @deckling823 10 วันที่ผ่านมา +1

    I just bought one, and I have been trying to learn from youtube videos, it has its learning curve for sure, but you made it so easy to understand with this video, my problem was trying to understand how the matrix bottoms work. I usually don't like learning the manual and just go all in figuring it out hahaha

  • @BernardGindrey
    @BernardGindrey ปีที่แล้ว +10

    Hello, could you please make the cheat sheet available?

  • @davidjohnsimmons9044
    @davidjohnsimmons9044 ปีที่แล้ว +14

    Hey, great video manual...I found a solution to both our problems about the SYNTRX II not matching up with MIDI and having to tune the oscillators all the way down just to get a midrange sound...the answer is in the Globals, which you get to by pressing the shift and the < patch buttons...you then use the left encoder to scroll down to the Global named M-NO (MIDI note offset)...then use the right encoder to get the offset you need (36 was perfect for all my controllers)...now it sits about perfect!...also, Inputs 1 and 2 are normalled to the Scope output, so you don't need to run a cable between them...cheers!

  • @melodicmachines
    @melodicmachines ปีที่แล้ว +10

    Here's the text from the cheat sheet:
    Effects automation: hold REC/CLEAR while moving TIME knob
    Clear joystick memory: double press REC/CLEAR
    MIDI CC messages go through JOYSTICK channel on the matrix
    RIGHT ENCODER makes or breaks full on connection
    LEFT ENCODER press cycles through 4 levels of attenuation (off, 30, 70, 100)
    Navigate matrix with joystick: hold SHIFT while moving JOYSTICK
    Draw on matrix with joystick: hold SHIFT, move JOYSTICK then hold RIGHT ENCODER
    Erase on matrix with joystick: hold SHIFT, move JOYSTICK then hold REC/CLEAR
    Audition a connection: hold SHIFT and press RIGHT ENCODER
    Create a random patch: push SHIFT and RIGHT PATCH button
    To erase a patch push SHIFT, SAVE and RIGHT ENCODER together while on patch matrix page
    Engage sequencer: push SHIFT + GATE/SEQ
    Play or stop sequence: push PATCH FORWARD button
    Manual step advance: hold LEFT PATCH BUTTON and turn LEFT ENCODER
    Change note octave on seq: push RIGHT ENCODER repeatedly to cycle through 3 octaves
    Set sequence length: hold SHIFT while turning RIGHT ENCODER
    Set note’s gate length: push LEFT ENCODER and turn RIGHT ENCODER
    Set BPM: hold SHIFT and turn LEFT ENCODER
    Set play direction: Hold SHIFT and press RIGHT PATCH BUTTON
    Stepped modulation (comes through Joystick matrix channels): SHIFT + LEFT ENCODER
    Reset VCO pitch on stop: SHIFT + RECALL while on seq
    Turn Matrix LEDs off. SHIFT + RECALL while on Matrix

    • @ColeDano
      @ColeDano 3 หลายเดือนก่อน +1

      Legend!

  • @hexfxtriks
    @hexfxtriks ปีที่แล้ว +3

    Thanks for the video manual! Reduced a lot of my head scratching.

  • @alanblight9233
    @alanblight9233 ปีที่แล้ว +1

    I like this synth , I once had an AKS , same thing supercharged . Nice .

  • @externalcontrol
    @externalcontrol ปีที่แล้ว +3

    Great video, I found it really useful for getting started, thank you! I have just bought mine , I got it to go with the Perkons (a great pairing) When I first tried midi -ing them up I had an note offset problem the pitch was about 3 octaves higher , and I could not get it synced, so I tried the midi out from my mixer (roland mx1) and it worked perfectly, then I tried the midi out from the Perkons again and it was perfect , Sometimes midi settings are a little strange lol ...but thank you again for the great help

  • @kanrekipapa
    @kanrekipapa ปีที่แล้ว

    I came from "kiki catnap".
    It was a lot of fun and I learned a lot.
    I will do my best to create fun videos with my daughter!
    Thank you very much 👍

  • @Ian-gw2vx
    @Ian-gw2vx 10 หลายเดือนก่อน +1

    This has really helped me as I have not really had chance to get properly stuck into mine for months, so thank you for that. I did wonder if I would miss the spring reverb but it's good to know you can get this to sound like one anyway.

  • @mrfuzztone
    @mrfuzztone ปีที่แล้ว +5

    Can you put a download link for your cheat sheet?

  • @alfonsoaraujo4102
    @alfonsoaraujo4102 10 หลายเดือนก่อน +2

    hello great vid, would you share your cheat notes?

  • @caesarsheadache
    @caesarsheadache ปีที่แล้ว +5

    Can I ask where you retained the cheat sheet from please?

  • @clementvoisin1128
    @clementvoisin1128 ปีที่แล้ว +6

    Bravo 🙌
    your video is perfect, is it possible to have your list of cheats? a big THANK YOU for your work!!!

  • @deafalienzulu
    @deafalienzulu 7 หลายเดือนก่อน +1

    👽

  • @kosmotanable
    @kosmotanable ปีที่แล้ว +2

    awesome thank you so mich!

  • @InFamousProductions
    @InFamousProductions ปีที่แล้ว +1

    Hey Bro. I was on your I've Q&A with Geertz (how ever you spell it , sorry) and that live stream convinced me to buy one, so don't beat your self up on that live stream. it was great. It's good that you were the new guy. we are all that guy. so I just finished watching, and it took a few days , because I stopped and tested a lot of your instructions. There are a few things that are super deep level that the Syntrx can do, and last night I inserted some live kick/hat out of my Soma Labs Pulsar 23 and did some test. I wish I made a vid, I'll make one asap. I put it into IN port 2 and used it for CV and also just run it into the Syntrx reverb/delay, and It really takes it to another place, just doing that. . But ya, your vid was super helpful thanks for making it so I don't have to hahaha.

  • @alfonsoaraujo4102
    @alfonsoaraujo4102 ปีที่แล้ว +2

    Great video, would you share teh notes in your pages?

  • @spdycar13
    @spdycar13 ปีที่แล้ว +1

    Very helpful. Thanks!

  • @paulsimvient
    @paulsimvient 8 หลายเดือนก่อน

    really fantastic video manual - thank you so much for this.

  • @caesarsheadache
    @caesarsheadache ปีที่แล้ว +1

    Outstanding demo 🫵 Cheers 🔥🔥🔥🤘

  • @TheSyndromeda
    @TheSyndromeda 7 หลายเดือนก่อน

    Bedankt

  • @reformskg
    @reformskg ปีที่แล้ว

    Thank you 🙌

  • @caesarsheadache
    @caesarsheadache ปีที่แล้ว +2

    Purchased one now. Using your great video manual to get to know it. Can I ask where you retained the cheat sheet from please?

  • @TheBluehood23
    @TheBluehood23 หลายเดือนก่อน

    I just got mine and I'm excited and scared lol

  • @melodicmachines
    @melodicmachines ปีที่แล้ว +1

    Great video. Would you mind sharing the cheat sheet please?

  • @MatthewLowes
    @MatthewLowes ปีที่แล้ว +3

    Fantastic! Your Black Sequencer video manual was a huge help to me and now this one too. Very cool. Is there anywhere you have your cheat sheets available for download. Either way, thanks for the great video. Cheers. :)

  • @sktlove.w
    @sktlove.w ปีที่แล้ว

    Yeahhh i live your songs

  • @psysword
    @psysword 10 หลายเดือนก่อน

    Awesome

  • @spacechord
    @spacechord ปีที่แล้ว

    Thank you 💞🎉😂❤

  • @Yungwerra
    @Yungwerra 10 หลายเดือนก่อน

    Awesome vid, but really trying to figure out how to sync my tr8s with the sequencer of the syntryx2, any help? :(

  • @gianaccetta8571
    @gianaccetta8571 10 หลายเดือนก่อน

    hey there, haven't watched the video yet (I will) but any reason why the headphone output sounds fine but output 1 & 2 sound crunchy distorted shitty and all the same even when swapping the preset? i tried turning all the knobs too, im not sure if i have some weird setting on, seems like it happens sometimes sometimes not

  • @sktlove.w
    @sktlove.w ปีที่แล้ว

    *love

  • @Soundwrecker
    @Soundwrecker ปีที่แล้ว

    Question: Ring Mod source selection SIGN. What does that mean and how is it used? Thank you for the video.

  • @mickvdzwan
    @mickvdzwan ปีที่แล้ว

    Just received it, does anybody know why my syntrix keeps making randon noises. ( speed depending on osc3 ). I Just want it to make sound when sequenced externally.

  • @RotasLugaresDavidMarreira
    @RotasLugaresDavidMarreira ปีที่แล้ว

    👍👍🎵🎵🎵

  • @knasterask1
    @knasterask1 6 หลายเดือนก่อน

    🎉thanx for making this manual. I get mine tomorrow🎛️