Do you have any suggested videos of actually walking through the process? This video is a nice overview and gives some nice disclaimers, but doesn't actually walk through it.
Because typically a spool can twist the splines on the axles on corners and what not. If you get a s trac or tru trac diff which is an LSD you can drive it on the street with c clip eliminators all day long
Hey I have the same spool and I have an 8.8 differencial but the bearing kit d1582 that they say is for gm12 bolt and 8.8 Ford does not fit on mine it's too big which one did you guys use for that 8.8 if u can helpme
Hey there! Give us a call or email us with the link below and a customer care representative can assist you selecting the right C-Clip eliminators! lmr.com/contact
@@quarawlisstafford487 All 79-85 foxes 7.5 diffs have 28spline axles.. 86-2004 V-8s 8.8 diffs have 28spline axles, V-6 cars 7.5 diffs 28spline axles... 05-10 V-8s 8.8 diffs 31spline axles, V-6 cars 7.5 28spline axles.. 2011-up Both GT V-8/V-6 cars have 8.8 diffs 31spline axles... 2001-04 cobras are IRS/independent-rear-susp. but have 8.8 Center-diffs & have 31spline limited-slip carrier that can be used in any Ford 8.8 diff w/upgraded 31spline axles...
Evan - A spool and c-clip eliminator kit will work with factory 31 spline axles. I 'll be honest with you, I don't know if the factory axles are hardened, but that is something to consider if reusing a factory axle. -Landan
This kit is intended for drag race applications. If you're replacing axles on a stock 2004 GT, purchase factory-style axles. Link below. Thanks. -Landan lmr.com/item/LRS-4234DK/Mustang-28-Spline-Axle-Shafts-Wheel-Studs-99-04
Do you have any suggested videos of actually walking through the process? This video is a nice overview and gives some nice disclaimers, but doesn't actually walk through it.
Planning on going ford racing differential with c clip eliminator from strange is this setup no good for street use ?
Could the Same Application be done To a Dana 60 Gm/ Dodge Axle?
Why are the C-Clip eliminators not recommended for street use?
Engineered for top notch straight line drag enthusiast. Not street
Because typically a spool can twist the splines on the axles on corners and what not. If you get a s trac or tru trac diff which is an LSD you can drive it on the street with c clip eliminators all day long
@@Sleeper_Solutions lmao I was thinking the spool was the problem and they should state that
@@austinhowze6280 the spool is the problem no idea why anyone would say that about c clip eliminators
@@Sleeper_Solutions yeah I'm doing some research wanting to build my rear in my 04 stang. But idk anyone that builds rears so I pretty much on my own
Hey I have the same spool and I have an 8.8 differencial but the bearing kit d1582 that they say is for gm12 bolt and 8.8 Ford does not fit on mine it's too big which one did you guys use for that 8.8 if u can helpme
Is there still in and out play on the axles ?
Question what axle bearings do i use on a 1990 fox body when converting to 31 spline axles thanks.
Probably a little late but the stock size bearings fit the 31 and 35 spline diffs just fine
Which c clip eliminators for a fox with SN95 rear discs?
Hey there! Give us a call or email us with the link below and a customer care representative can assist you selecting the right C-Clip eliminators! lmr.com/contact
any reason for 35 spline when you stated engine wont get much done...or is there something you arent telling us...lol
You can run whichever spline count you want. The owner of the car opted for the 35 spline kit. -Landan
can I use this for offroad? and what happens to the limited slip?
The limited slip goes away. I would strongly suggest keeping this away from off-road use. -Landan
I have a 98 saleen are the rears the same as 99-04
All v8 86-10 rear ends got 30spline 8.8 except the 2001 cobra and 03-04 cobra. The V6 cars got a 7.5 28spline.
@@quarawlisstafford487 All 79-85 foxes 7.5 diffs have 28spline axles.. 86-2004 V-8s 8.8 diffs have 28spline axles, V-6 cars 7.5 diffs 28spline axles... 05-10 V-8s 8.8 diffs 31spline axles, V-6 cars 7.5 28spline axles.. 2011-up Both GT V-8/V-6 cars have 8.8 diffs 31spline axles... 2001-04 cobras are IRS/independent-rear-susp. but have 8.8 Center-diffs & have 31spline limited-slip carrier that can be used in any Ford 8.8 diff w/upgraded 31spline axles...
does this work with stock 31 spline axles?
Evan - A spool and c-clip eliminator kit will work with factory 31 spline axles. I 'll be honest with you, I don't know if the factory axles are hardened, but that is something to consider if reusing a factory axle. -Landan
Can i buy this just to repalce my stock 04 Gt ? Will it still finction properly?
This kit is intended for drag race applications. If you're replacing axles on a stock 2004 GT, purchase factory-style axles. Link below. Thanks. -Landan
lmr.com/item/LRS-4234DK/Mustang-28-Spline-Axle-Shafts-Wheel-Studs-99-04