3 Reasons I DISLIKE My Ranch Hand Bumpers and Running Boards
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2023
- #truck #f250 #ranchhand
Amazon Store: www.amazon.com/shop/wandering...
***************** START HERE VIDEOS *****************
Wandering Weekends Playlists
-Will the RV Tour: www.youtube.com/watch?v=LEnS6...
-Our First Video Together: www.youtube.com/watch?v=vvZri...
-Official WW Campground Reviews: th-cam.com/users/playlist?list...
-Kid Friendly Adventures: th-cam.com/users/playlist?list...
-Georgia State Parks: th-cam.com/users/playlist?list...
********** SOCIAL MEDIA LINKS ***************
/ wanderingwknds
/ wanderingwknds
www.wanderingweekends.com/
**********AMAZON STORE*******************
TOWING:
Our Weight Distribution Hitch: amzn.to/2P5N1LJ
Our Suspension Upgrade: amzn.to/2NZCSUi
Our Wet Bolt/Shackle Kit: amzn.to/2zLGbFU
SETTING UP CAMP:
Our Leveling System: amzn.to/2xRRrPw
Our Chocks: amzn.to/2P2AZ5x
Our X-Chocks: amzn.to/2NZ6pgD
Our Jacks: amzn.to/2Qpj1KL
Our Front Jack Cover: amzn.to/2P1UE5H
WATER HOOKUP:
Our Water Filters: amzn.to/2y6DtsA
Our Water Pressure Regulator: amzn.to/2OsUreM
Our Water Hose: amzn.to/2yaVi9B
Our Kink Preventer: amzn.to/2P4LTHW
DUMP STATION ACCESSORIES:
Black Tank Treatment: amzn.to/2HvrzO9
Our See Thru Connector: amzn.to/2zMSZfi
Our Dump Kit: amzn.to/2OwPIJ1
POWER ACCESSORIES:
Our Surge Protector: amzn.to/2RjSEXV
Our Extension Cord: amzn.to/2xUfYn9
COOKING ACCESSORIES:
Our Griddle: amzn.to/2Qpg2C3
Our Grill: amzn.to/2P1S2op
Our Coffee Maker: amzn.to/2RklTd7
CAMP ACCESSORIES:
Our Couch: amzn.to/2OwIKDP
Our Lantern: amzn.to/2zLWrGE
Our Mattress: amzn.to/2OAjdJX
Our Sippy Cups: amzn.to/2IPorfJ
Our Air Filter: amzn.to/2ydLCfD
Our Mrs. Meyers Stuff: amzn.to/2y9QNgz
Our Blackstone Kit: amzn.to/2pW0drD
Our Fav Candle: amzn.to/2QMko6F
Our Weather Station: amzn.to/2QKG9Ui
Tallulah's Crate: amzn.to/2yiCxC9
Our Vent Insulation: amzn.to/2D3gPWY
BOARD GAMES WE LOVE:
Camping Game: amzn.to/2CCQair
Fastrack: amzn.to/2O1qtKx
UNO: amzn.to/2D3hNm4
Frozen: amzn.to/2q9spXP
********** CAMERA GEAR ********************
CanonM50 w Rode VIDEOMICGO: amzn.to/2xLdsPX
DJI Spark (fly more kit): amzn.to/2OiFuMb
GoPro Hero 6 Black:amzn.to/2R8z94s
iPhone 7: amzn.to/2InZA2h
HoHem 3 Axis Stabilizer for GoPro: amzn.to/2Ipdj8X
*There are links above that can be defined as “affiliate links”. This means that we receive a small commission (at no cost to you) if you purchase something through the links provided.
Some of our music comes from these guys:
Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
Bama Country - Country by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Most 2019 Music from Epidemic Sound
I feel the same about running boards like that. I want them deep enough that they actually stick further out than the furthest out portion of the door panel so that in a parking lot, other peoples doors hit the board rather than the side of my door.
the only way ive found to make these running boards more functional the way they are is to spray them with a bedliner coating of your choice. ive had customers ask for rhino, linex. same with the rear bumper and we have done the front bumper/ brush guard aswell. thanks for the video. were also in ga. great to see other youtubers in ga. very nice truck by the way.
Appreciate your candor. I can see your issues. I put similar step bars on my previous pickup but they were non-glossy and worked pretty well.
I am pretty sure cost cutting measures were made where they stopped making the bumpers not as deep as they use to be. In the early 2000's Ranch Hand bumpers were bigger. The space between the guard was also bigger.
I think a strip of those anti slip tapes will help. What you gain in the low profile look, which I like, you give up the depth of the step. I always plant my foot parallel to it
I fully agree with your assessment they look really nice but with some disadvantages thanks Cory
I got mine used. Coated it with monstaliner. Makes a big difference as far as sliding around goes.
GOOD JOB. A LOT OF GOOD INFORMATION. I am NOT a big fan of the BIG brush guard on the front of the truck. I do like the look of the back bumper.
As you know we have the exact same set up. I'm thinking about using some 3M backed anti slip tape at the base of the steps. Meaning wrapping the bar in front of the step to the bends in the pipe.
Definitely an option but it stinks to have to modify high dollar parts 🫤
@@WanderingWeekends True dat!
Fair and honest review. - from a fellow Georgian
To each his own, but for me function has to match or even exceed form or it’s not worth having. All their products look like they’re made very well but if you can’t use the steps due to how shallow they are then there’s no point in having them.
in normal use you wouldnt step straight into the step, you'd hit it at an angle.
It would ruin your look, but anti-slip tape on the rounded part would improve traction and safety on running boards.
Always appreciate your fair and honest reviews.
I’ve thought about it on the running boards for sure. They’re pretty scuffed anyway.
That's exactly what I was going to suggest. Or change to the Amp electric retractable steps. I have them and love them. They tuck pretty much completely out of the way when retracted and come down further when deployed.
I went to retractable running boards for my F250....BIG help for my wife getting up into the truck. Got them just down the road from you at Wild WIlly's.
Q for the host and others. After a front-end crash on a 2016 Tacoma, I'm considering a grill guard or bull bar for the replacement Tacoma.
What make of guard or bar would you recommend? Also, what size tubes/bars would be the minimum to provide protection and not just provide a nice look?
Running boards, saw, extend, re-weld, add-on to rear bumper, front: saw the middle out so it can swing open. You'll be proud.
To each their own but after watching the video and reading the comments I would like to point out that the name of the company is "Ranch Hand" not "Suburbanite Hand". Those brush bumpers and running boards are designed to be used on feed trucks in the brush and the mud. The only time I've ever seen them as shiny as those is when they are brand new out of the box. I'm honestly not trying to trash talk, just pointing out that things you consider to be design flaws in Georga running up and down the road have purposes here in Oklahoma, Texas, and Kansas where those are on one-ton's going in and out of muddy pastures feeding cattle all winter.
So folks in Texas don’t want any room to step on their running boards? They don’t want to use their back bumper as a step? They enjoy slipping on a rounded bar? It’s also quite naive to think I’m not country folk. You have no clue where I’m from or how I was raised.
These parts are ill conceived. Great quality/ bad design.
…and yes, I take care of my truck. It’s been washed. I won’t apologize for that.
Same as you, I’m not being smart. I’m simply making my point clear.
@@WanderingWeekends Thanks for this video, was gonna purchase the running boards but I didn’t consider the depth. Not sure now if it would be a worthy addition for the price.
I ended up with the Westin HDX boards on my ram. When I was looking at boards I kinda thought the same thing they don't look very deep also didn't like the "shine" paint as you said it's a running board that's gonna get beat to hell and scratched. Only complaint about the westin is they boards are not easy to clean they are a 2 part system each step has allen screws that need removed to clean under the traction plate I guess you can call it. Iv had them for a year and held up quite nicely tho minimal scratching and believe they run $600ish. Just an option if you decide to change them
I really like that rear bumper for looks and obvious crash protection but I can see your point on the tread depth for functionality, the cab steps I can definitely relate to as I had a similar set up on my truck and never could get use to them for all the same reasons you pointed out as for the front bumper great front end protection but not the look I’m into but that company obviously has great build quality!
Yes, great build quality but I would be weary of placing this set on a truck needing all of its payload. Nearly 400lbs of equipment. I’m leaving them on for the protection aspect you mentioned.
Line X or truck bed coat the steps
Line x or truck bed coat step on bumper
The center part of the front brush guard should fold down and have a step so you can check oil, clean easier etc. All the items you received and reviewed should have be rhino linex coated. I wouldn't pay $900 for running boards that are barely functional and easily scratched. Great review video. Hopefully they listened to you because I'll be looking at them seriously in a couple months.
Put PPF on your front grill, or a cover on the grill for the ease of access. And if you don’t like doing that take the front off
You could always put some grip tape on the round bars to make it non slip.
Wash mit really! I live in east Texas deer country, mud , blood and deer guts is all I’m worried about cleaning!
I’m thinking about getting a full ranch hand front and rear bumper for my next truck that I’m thinking about buying my next might be a a 22 6.7 king ranch or 22 ram 3500 or 2500 longhorn
Fab Fours makes good bumpers, had one in my 07 sierra 2500 and i now have one in my 23 ram 5500. Ranch hand has no bumpers for a ram 5500 another reason i didnt use them even do i wanted to try them
They could rinoline the running boards
At least the foot placement areas.
😄👍Good Stuff, Great Tips
Why didn't the bike rack work out with the front receiver on this bumper? I'm looking to get this front bumper to use with a Maxxhaul 50027. I can't really imagine a scenario where this rack couldn't work on this bumper unless the bikes sit too high, but now you've got me wondering. What rack were you trying to use?
The bikes say WAY too high. I was using the Curt tray style rack.
I have the same running boards. I put my foot sideways in line with the length of the foot plate. For me that's a more natural position to get into my truck and grab handle on the a-pillar. Have you tried this approach?
Yes… There really isn’t another option. Unfortunately my 6-7 year old didn’t always understand this.
They're more like nerf bars, not running boards. And it's not a grill guard, it's a cow or deer catcher.
I can't imagine having to do much work under the hood of that bad boy with that grill guard in the way. Looks cool though
Actually it makes for a great step stool!
The Duke says, how do you change the headlight bulb?
Don't it get in the way?
Is the F250 a daily driver for you? Looking to get a new truck to pull a rv and I'm trying to decide if it's worth the price to go f250 out 1/2 ton.
Yes it is. The towing experience is worth the trade for me. Obviously that’s an opinion.
I really like the rear bumper. 👍 Plugs .
Was that your 🎈Plugs?!
@@WanderingWeekends They just told me about it 2 hours ago . I think 🤔. Lol
😂🤣
Those rear bumpers are so tiny!
I’m glad I don’t have to deal with them anymore.
Get a wheelchair ramp
Huh? If you’re gonna make a smart ass comment at least be funny or make sense. 😘
Oh man, you sure got a rough life.
Hey! How is that ranch hand legend holding up? I am torn if i should order one or not..i have hit three deer with my f250 and thinking its time.
Well built products but I wouldn't install the rear bumper or the running boards again. I've since traded the truck in this video. If I HAD to do it over I'd likely only do the brush guard vs the whole bumper/brush guard setup.
What was the reason for only wanting to go brush guard vs the whole front bumper brush guard package? How did the paint hold up? And did you have to do any modifications to the front as far as shocks or level kit? I have smoked three deer with my truck already and I've had it over a year.
@@WanderingWeekends
Easier to remove and I personally think it looks better. Paint was great. No mods needed.
Maybe they're made for the user to turn their foot more sideways
if so that was a terrible choice of design...
They say they are made with steel and schedule 40 4" tube. Where is the schedule 40 tube at, and is it a weak point? The only round areas I see are the radius in the bumpers and that looks like painted steel. Not sure I'm understanding this
Does your front end sag with the bumper?
No, not at all.
There is a coating on the bumpers, they're powder coated, not painted.
Ive never seen a glossy powder coat… and if it is a glossy powder coat it’s still slippery… and I’m glad to be rid of them.
Your mad about a round tube wanting a square tube until you slip on that and catch a shin. Round tube is more forgiving to the body, that's why they use round tube
I’d rather catch a shin than a face…
Just my opinion but I think those gaudy front bumper guards look horrible. Totally look over done. Nice truck just trashed it up with that monstrosity. Just saying. Like your channel though.
I thought the same until you hit a herd of deer on the highway at nighttime towing a travel trailer, saved me from totaling my truck.
Just not a fan. Front brush guard is ugly.