PILOT LEARN PROCEDURE & injector compensation codes - p1601
ฝัง
- เผยแพร่เมื่อ 15 ธ.ค. 2019
- P1601 Some issues that may or may not arise. They wont likely arise if you study my information like this video. You could take it to a professional that we Recommend. You can believe you have someone who knows what their doing.... i hope your right. Too many unnecessary calls when you choose the wrong person. Lets all get educated, get it right the first time, no time wasted, no stress!
- ยานยนต์และพาหนะ
![[LIVE] : ONE ลุมพินี 72 วันนี้!! คู่เอก "ก้องศึก vs โจอาคิม"](http://i.ytimg.com/vi/hT1EOSsRPac/mqdefault.jpg)
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 64 [ซับไทย]](http://i.ytimg.com/vi/Pmsta0byEpk/mqdefault.jpg)
Thankyou very much . Were stuck with this not working on the minesite . It kept failing . Now I have witnessed it should work .
Regards
Ian
Light Vehicle Fitter in Western Australia.
Recently went through this with a 2013 Auto Hilux after watching multiple of Anth's videos. Using the ilink400au from Vident & a very expensive Snap-on Scan tool. Aircond off. Two times with over 100-150 throttle stabs using the Vident Scan tool & then swapping to the Snap-on Scan tool with about what felt like 300 throttle stabs. Still the PQL did not complete or advance. Could not clear the P1601 CEL code. Later after calling in all the brains trusts I knew, Auto Sparkie & Diesel Mechanic we gave up. Later that evening I had it idling for about 1/2 hour with Vident scanning the live data. I went into Special Functions>Piloy Quality Learn - Confirmation. In there I could check that my Injector coding was correct. Then I went back to reading the DTC's. P1601 was there still with the CEL up. I thought why not have one more go at clearing the DTC P1601 & for some odd reason it cleared this time. Even though we never actually completed a PQL Detail on the two scan tools we used. Weird, but I am finding the vehicle is running well so will leave it at that.
Thanx heaps cobber bloody legend, love ya work and your info 👌👌💯, I even hit that like button about half way through the vid,, I've never done that before lol
New to your channel but revs in total 111. Revs for it to take with A/c off in total where about 70. Thanks for the information have a wonderful day
This is gold, what a legend! Thank you.
You are legend man!!!! Thank you for this!))
I just watched your video and… Pilot learning procedure is quite different from tool to tool. For example on Delphi DS150e diag, you need to fullfil certain conditions to start and that is 90 degree of coolant and 41-63 degree of fuel temperature. It comes in 4 stages and its operating automaticaly. It puts certain pressure on injectors while idling and you have impression that car is going to take off! Most important - All consumers (especially aircon) should be OFF!!!
Awesome video thanks so much
111 total number of revs.
@ 70 revs A/C turned off.
Sir thanks vary vary thanks
Antjony, What is that sound the engine makes when depresing the acelerador at the end of the learning process?, is like naping or one valve out of telerance,
Next injector compensation coding yes sir
Awsome
Hi Anthony.
What is the difference betweet pilot quantity learn en pilot quantity learning detail? Thanks.
does this apply to 2016 79 series land cruiser too?
Thank you.
Will performing a pilot re learn with a steinbauer chip on the vehicle effect the re learn?
good video
Is this the Denso Ti2 tester or a chinese one?
What is the brand name of your scanner? Thank you
What is pilot quantity learning for? Is it about fuel injection calibration?
Nice
does this work on a no4c engine for toyota coaster?
Hello mate my 2008 doesn't give pilot relearn function on my Toyota techstream, injectors were redone but still noisy at 2k rpm on light throttle can you help?
Hello
I bought a new nozzel (1piece ) for my hilux 2015 1gd engine but my car smokes pased 3000 rpm
Do I have to do pilot injection learning for Toyota Land Cruiser Prado 120 with 1KD-FTV, made in 2008? Can I do this with a Techstream software?
Anthony did say a few time needs pilot learning from 2010 up, otherwise just need to put in injector calibration codes, that,s how I understood it.
AS usual great Video Anthony, thankyou
Same procedure if car lumpy and hard to start ?
If pilot learn procedure fails to learn glow plug light will flash 2 quick flash’s then one longer flash For cylinder 1 or 2 quick flash’s two longer flash’s for cylinder 2 and so on .3/4 To indicate which injector is faulty( In my case it had good injection feedback Vals but were faulty injectors) replaced injectors , pilot learn procedure was learnt code p1601was gone.
That's all? Without save and confirm?
Hi man, just have had my injectors replaced and need this tool to put in the codes. What is the tool that you are using? Thanks for the reply in advance@
Intelligent tester MK2
£699
Please help me I need the same tools
What a PIA for the procedure! And pretty bad for the engine. FFS
On a LR with a fishy Ford engine and Denso system the pilot learn is way more simple.
I get the same problem injectors didn't get power same body help me Hyundai h1 2008
Not working with any launch scan tool
Buy his Injector kit then he will reply
Ha ha mate I am just kidding. You are doing an awesome job cheers👍
That's crass!
We get lots of info without buying anything from him.
Is oke frands
vi todo el video alprincipio no entendia .pero mas veia el video fui entendiendo ..tengo que mirar otera ves el video para aserlo el a.cdebe estar en on ..eso me confunde ..revisrae otra ves el video ..nose muy vien el ingles..pero intentare entender..tenkio
Do u have a phon number i want send u a vedio of hilux with un sustained rail pressure going from 320 to 360 bar , i want to now weather it is normally or not , i have checked many diesel car and the value is sustained and matching the target value .
80 revs per injector 😅
how do we buy injectors off you?
Send me a text message right now and or keep watching videos how to buy my kits playlist