Ryan you are really getting into your stride with explaining your craft in these videos. The DIY code reader looked a useful bit of kit. When I was crawling around under vehicles I used to use belt (Jack) , braces (stands) and a couple of short lengths of railway sleepers.
Nice work Ryan, thanks for this clear and in depth video. You're not on your own in feeling claustrophobic lying down working under a car , i've done it myself working on the Kids cars over the years and my own of course. Worse still is losing your spanned when you've rolled over on it but didn't realise , thats where a good wife (they have the uncanny knack of missing nothing ) has come in very handy and saved my sanity a few times 😂😂ps, nice little diagnostic tool , looks good value and well made ATB, Ian
Like the phrase 'otherwise that crank sensor is ours' Unfortunately I have a selection of parts the cars didn't need and I'm sure they will come in handy one day. It's all good experience I tell myself.
It certainly was a good watch I’ve spent hours under vehicles just inches above my chest most of the time I don’t even think about it but occasionally enters my mind and like you say gives me the creeps.
You being under vehicle had the hairs on my arms standing up even though I knew it was a vlog. A relative of my wife who was also a mechanic died in exactly those circumstanses a few years back. Very informative video though.
tragic bud and you can have all the safety measures in place but when its your time its your time 😞 I luckily very rarely go under vehicles and mostly use the drive on ramps with axle stands for extra measure
Top video.,thanks for helping me learn about cars. Tool looks great & has good funtions for the price.. by the way, in these days of hard times, i am very happy to learn from you so i can keep my family zafira B working.. thanks again for your time and helping us
Ryan, your videos are never boring, teaching us methods of testing the faults and how to resolve them. What would be a good scope tool to start with, asit would be so much easier in diagnosing sensor faults. Where do you get your wiring diagrams from as they would be a life saver. Keep up the great work mate. 👍👍
Thanks wayne for watching, For scope use Micsig is a good option in my opinion. You also have little one channel scopes like the uscope 👍 I use hella hgs for diagrams, Nightmare to get subscription from them but when you do its well worth it
I get the creeps as well lying underneath cars. Removing a rear brake caliper on a 3 series BMW and I had to lie underneath to get leverage. Despite being on a jack stand and having the 19 inch wheel lodged underneath it only takes a moment for the whole lot to take a tumble and you are toast.
Hello Ryan, love watching your videos, I'm always on the look out for a reasonable priced OBD tool to reset a sondero service light, its the model that can't be reset manually. would the launch be able to do this?
Interesting stuff Ryan.. I've yet to find anyone in the trade that looks forward to lying on their back under a tonne plus of motor vehicle, especially if it's dark, raining and or freezing cold. 😫 Great demo of the LAUNCH CRP123E.. Seems reasonable for the money and it past the test by diagnosing the main issue on the Audi .. I also think you might have highlighted a general issue with the supply of parts as well.
I'm a roadside emergency tech and have no choice ut to be under big cars trouble shooting never without axle stand tho,Sometimes no where to put it with jack in place, I then abort no question, Great videos Ryan enjoy very much
every apprentice should be watching these videos instead of playing gta or cod .every morning . 😁
Wow thanks 🙏
Ryan you are really getting into your stride with explaining your craft in these videos. The DIY code reader looked a useful bit of kit. When I was crawling around under vehicles I used to use belt (Jack) , braces (stands) and a couple of short lengths of railway sleepers.
Nice work Ryan, thanks for this clear and in depth video.
You're not on your own in feeling claustrophobic lying down working under a car , i've done it myself working on the Kids cars over the years and my own of course.
Worse still is losing your spanned when you've rolled over on it but didn't realise , thats where a good wife (they have the uncanny knack of missing nothing ) has come in very handy and saved my sanity a few times 😂😂ps, nice little diagnostic tool , looks good value and well made ATB, Ian
Thanks for watching Ian 👍
Like the phrase 'otherwise that crank sensor is ours' Unfortunately I have a selection of parts the cars didn't need and I'm sure they will come in handy one day. It's all good experience I tell myself.
Been there plenty of times before, Fortunately it doesn’t happen alot now as i have learned many lessons 🤣
It certainly was a good watch I’ve spent hours under vehicles just inches above my chest most of the time I don’t even think about it but occasionally enters my mind and like you say gives me the creeps.
Thanks for tuning in Kevin 👌
You being under vehicle had the hairs on my arms standing up even though I knew it was a vlog. A relative of my wife who was also a mechanic died in exactly those circumstanses a few years back. Very informative video though.
tragic bud and you can have all the safety measures in place but when its your time its your time 😞
I luckily very rarely go under vehicles and mostly use the drive on ramps with axle stands for extra measure
Thank you always interested in your diagnosis
Top video.,thanks for helping me learn about cars. Tool looks great & has good funtions for the price.. by the way, in these days of hard times, i am very happy to learn from you so i can keep my family zafira B working.. thanks again for your time and helping us
Thanks for watching Neil 👍
Great video Ryan. Keep them coming. Cheers
Thanks, will do!
Ryan, your videos are never boring, teaching us methods of testing the faults and how to resolve them. What would be a good scope tool to start with, asit would be so much easier in diagnosing sensor faults. Where do you get your wiring diagrams from as they would be a life saver. Keep up the great work mate. 👍👍
Thanks wayne for watching, For scope use Micsig is a good option in my opinion.
You also have little one channel scopes like the uscope 👍
I use hella hgs for diagrams, Nightmare to get subscription from them but when you do its well worth it
@mrautoservices7354 I'll try and look into that, thanks for taking the time to reply. 👍👍
Always great to watch 👍
Thanks Shaun
I get the creeps as well lying underneath cars. Removing a rear brake caliper on a 3 series BMW and I had to lie underneath to get leverage. Despite being on a jack stand and having the 19 inch wheel lodged underneath it only takes a moment for the whole lot to take a tumble and you are toast.
Agreed sometimes you need even more safety measures and even then things can still go wrong
Cheers
Excellent video as usual, I find it interesting to see how you diagnose the issues, I'm learning all the time 👍
Thanks that means a lot to hear, Cheers
Great work as always.
Cheers Mike 👌
Can you recommend a good diy scan tool for EVs? Especially Hyundai electric?
Hello Ryan, love watching your videos, I'm always on the look out for a reasonable priced OBD tool to reset a sondero service light, its the model that can't be reset manually. would the launch be able to do this?
For a basic scanner it should do the job bud, You might even get a cheaper tool thats capable of this also 👍
Interesting stuff Ryan.. I've yet to find anyone in the trade that looks forward to lying on their back under a tonne plus of motor vehicle, especially if it's dark, raining and or freezing cold. 😫 Great demo of the LAUNCH CRP123E.. Seems reasonable for the money and it past the test by diagnosing the main issue on the Audi .. I also think you might have highlighted a general issue with the supply of parts as well.
Cheers for watching mate
I'm a roadside emergency tech and have no choice ut to be under big cars trouble shooting never without axle stand tho,Sometimes no where to put it with jack in place, I then abort no question, Great videos Ryan enjoy very much
Brilliant as always 👍👍
Cheers Chris
Always a good watch.🙂
Thanks 👍
Which suppliers do you normally prefer?
RYAN DO YOU COVER EDINBURGH (WESTSIDE) AS I HAVE PROBLEM WITH MERCEDES B CLASS 2015 DIESEL
Hi Allan sorry we don’t cover as far as edinburgh
Thanks for tuning in 👍👍
Still a interesting video 👍
Cheers Roddie 👌
What does bi--directional mean with regards to scan tools please?
Mostly can input commands like for example egr valve testing etc, The tool can communicate in both directions
@mrautoservices7354 Thanks for that. Makes sense.
Where is the link for the tool pal
Hi Craig in description sorry