The honest relationship you have with Cleet is priceless, we can see that he really enjoys doing videos with you guys and we the viewers love it too !!!
To bad he got tazed for doing so (nice guy always get screwed or tazed)and had CLEETER and his crew suspicious and on there toes again like now what's he doing to make us look bad 😭😭😭😭😭
Jh that was friggin classic man. I havent laughed and yelled so hard at a video then seeing cleets face when you rolled down the driveway. Always nice to have good solid friends.
I was watching Cleetus' video and I was like I don't think you can out prank the prankster. I know JH isnt going to let you get him like this. When you pulled into your driveway with his truck I was laughing so hard. That's what you get Cleet!!! lol. So glad you did this. Will make him think twice again. Seeing him get owned was absolutely hilarious. Sounds like he ACTUALLY needs to take you out for lunch.
I thought I’d laughed all I could laugh after Cleetus posted it (props to Cleeter for being humble enough to post it lol), but sure enough I was cracking up again 😂 well played boys
JH and Justin, y'all rock! I saw Cleetus's video, and I knew that you were going to put out one, too. That was top shelf hilarious 😂. I laughed so hard on both videos. This was priceless. Peace 🤘 💥 ✌️
It takes a little time, but with steel wheels, you can remove the tire and take a hammer and chisel, and make a bunch of chisel cuts about 1/4 inch apart all the way around the inside of the bead so that when you mount the tire all those chisel cuts will grip the rubber and keep it from spinning on the wheel. A lot of offroad wheels come with little "cuts" around the bead for that very reason.
I’ve been binging your videos since cleeters episode of this. I really enjoy yall content JH! That 78 reminds me of my Papaws 78 k10, I watched him build a edlebrock 350 in our tractor barn for it when I was about 6 years old.
@16:18 they sell screws for this exact reason, they are not long enough to go through the rim and the rubber, summit racing sells them for vehicles that run street slicks with inner tubes, you drill the rim with 6 max each side of the rim, 6 on the front and 6 on the back of the rim...
Dry mount should work now. I busted OTR tires and at mining Rig for lot of years. Killer vids that repo was too funny man. Glad the S10 and Justin will be ready to rip!!
I work in a tire shop and yes, if you have a painted rim and a freshly mounted, slicked up tire; the bead can 100% spin and leak, depending on what you do with your tires. I occasionally hear tiny "sneezes" as the wheels are at full turn, while turning into a parking spot. There's a "just right" amount to use but, any kind of lubricant or sealant needs to be allowed to dry or "cook" away before you can "Hoon" with your fresh tires. Beadlock is the way to go, if you want no spin and to keep your beads from being able to fall off. Well, if it falls off bead locked, you've got bigger problems! 🤣
Been there with 15s and 16s on my dmax pulling trucks you need screws in the beads for sure. I tried the bead sealer and sanding the beads down so bare metal with no results.
Try a set of those bead grip wheels, they're textured inside the bead and less expensive than beadlocks. I hear a lot of people love them but never tried them myself.
JH did not disappoint. Pulling in with the Raptor was Epic!! Knowing now it wasn’t planned, makes it that much better. JH for the Win.
On a badass rollback even !
I liked Cleetus’s reaction “ who Told HIM !?”
That was the best part of the whole video..😂 the look on cleets face seeing his raptor pulling in on a flax bed had me rolling 😂
That oneupmanship on their faces was a classic that will live on in history. JH and Justin won the internet that day.
He was so pissed.
The honest relationship you have with Cleet is priceless, we can see that he really enjoys doing videos with you guys and we the viewers love it too !!!
Justin, normally I am a Cleetus man, but you absolutely stomped him with the counter repo move!!! Sooo much winning!
Hilarious 😂 Cleeter got bamboozled 😂
Beside Cleet, seeing the situation from Diesel,s perspective made it twice as funny 😂
I love how insanely well yall know each to do the SAME EXACT THING. Thats boys for life right there.
JH very honorable of you to go and clean up the mess you made. Was cool that you got him in advance with the repo.
To bad he got tazed for doing so (nice guy always get screwed or tazed)and had CLEETER and his crew suspicious and on there toes again like now what's he doing to make us look bad 😭😭😭😭😭
Best is when Garza is arguing with Cleet and he starts flagging you guys down not realizing it’s you. His reaction was priceless.
Lol when J H pulled in the look on cleet s face was priceless hahahahahaa wicket vids bois Keepem coming
Epic showdown and Justin and JH kicked ass!! I love your friendship with Cleeter and the crew. You guys are so fun to watch.
Hell yeah been waiting for this! I laughed so hard when you pulled up with his truck!
The way he walks is funny enough for me. All these antics are hilarious 😆😂🤣
Jh that was friggin classic man. I havent laughed and yelled so hard at a video then seeing cleets face when you rolled down the driveway. Always nice to have good solid friends.
Justin's engineer goggles really showed the way. That was a hilarious scene!
That tow truck arrival was so perfectly timed. I was laughing so had tears in my eyes. Good content!
I was watching Cleetus' video and I was like I don't think you can out prank the prankster. I know JH isnt going to let you get him like this. When you pulled into your driveway with his truck I was laughing so hard. That's what you get Cleet!!! lol. So glad you did this. Will make him think twice again. Seeing him get owned was absolutely hilarious. Sounds like he ACTUALLY needs to take you out for lunch.
Dedication and genuine approach make your channel a joy. Congrats!
Dude this was one of the funniest things I've ever watched on YT, if you guys actually didn't plan that out this is wild.
i was dying laughing when you guys pulled up in that rig with his raptor on the back LOL
you guys know each other too well 😂
Quickly becoming one of the best channels on TH-cam!
Great job J & J!!
I dont know how this channel isnt over a million subs. You guys do such an amazing job. Keep it up .
That was epic 😂 JH said "owww" after getting tased 😂
Electricity is always a way to test friendship lol
Electricity is always a way to test a friendship lol
Yes buddy I feel the same way too. We are all in this together keep your hands up an stand together
❤
Garret was SHOOK when he saw his raptor on the flatbed hahahaha i laughed so damn hard. When i saw his video I said to myself JH got em boyyyy!
You guys are my idols for real. I love seeing you dial the fun back just enough to win, you guys have always had fun but now you have fun and win😎
I thought I’d laughed all I could laugh after Cleetus posted it (props to Cleeter for being humble enough to post it lol), but sure enough I was cracking up again 😂 well played boys
Impressed you returned to sweep the dirt off the Cleet. pavement. 😆👍
Cleetus really had no clue at all 😂
Yes you’re right JH the value of all your square bodies together are the value of the raptor haha
Both of these videos were epic!! When I saw you pull in on his video I was crying laughing!!😂😂
JH and Justin, y'all rock! I saw Cleetus's video, and I knew that you were going to put out one, too. That was top shelf hilarious 😂. I laughed so hard on both videos. This was priceless. Peace 🤘 💥 ✌️
It takes a little time, but with steel wheels, you can remove the tire and take a hammer and chisel, and make a bunch of chisel cuts about 1/4 inch apart all the way around the inside of the bead so that when you mount the tire all those chisel cuts will grip the rubber and keep it from spinning on the wheel. A lot of offroad wheels come with little "cuts" around the bead for that very reason.
The sound in Cleeter's voice when he sees the Raptor pulling up on the roll back was priceless lol
Y’all gave Cleetus the greatest one up ever lol
Let's freaking gooo brother 😂😅. Love the content brother. Funny as heck!! Ol Cleet looking crazy when u pulled in with his truck 😅😊
I’ve been binging your videos since cleeters episode of this. I really enjoy yall content JH! That 78 reminds me of my Papaws 78 k10, I watched him build a edlebrock 350 in our tractor barn for it when I was about 6 years old.
It was pretty epic. Ol Cleeter wasn’t expecting that. 😆
I couldn't believe it when i saw it on Garretts channel. Ive been waiting for this. 😂
I strive to be in a spot where I can just enjoy life like this. Good sh*t boys!
Man, you showing up with his truck on the back was the funniest part of his whole video! I laughed so hard at that!
Put gasoline on a rag it will help lube the bead, and once the gas dries, it will also melt the bead to the rim
Seeing Cleets genuine shocked reaction was priceless!!
One of the funniest Pranks I have ever seen!! 😂😂😂 10 out of 10 Justin
Sooo good, the whole thing, both sides, just hilarious!
Mister j h your videos have been hitting Good brother, keep him coming man. You're gonna have one of the bigger youtube channels you keep it up bro
The washer and dryer beside the pad 😂 lol my kinda guy
No clue what the PBR/Pall Mall guys did to that sbc, but it is one of the best sounding cheap junk sbc I’ve ever heard…
You guys are great! 👍🤘👏
I saw Cleets video and his face when you pulled up with his Raptor was a picture! No way that was setup!
One bounce of the key and she started, lovely burnout truck.
Great content as always, JH!!! 👍🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸
@16:18 they sell screws for this exact reason, they are not long enough to go through the rim and the rubber, summit racing sells them for vehicles that run street slicks with inner tubes, you drill the rim with 6 max each side of the rim, 6 on the front and 6 on the back of the rim...
“I’d say there is more of a 70/30 it doesn’t 🤣🤣🤣🤣
That was the funniest thing I have seen. Mad props! 😂😂😂
These guys never stop making me laugh that tow truck thing was so funny then cleetus tazed him for cleaning 🤣🤣🤣🤣🤣 I’m dead t
"Let me put my engineer glasses on"
Love the both of yalls channels and friendships to be able to mess with each other like 😂😂
Florida man repo's his friends truck! lol
Nobody talked Cleet, thank Simpli Safe's remote yadda yadda, hahaha!
5:26 Squirrel, Cleet, JH, George, Justin, Garrett. This freaking story is getting confusing! 😂
I want more pranks on each other because this had me rollin laughing lol
Would like to see more mudding on the channel. Maybe send somebody from the shop to the mud shows around Florida or something.
It was great seeing this from the other perspective! Nice job!
Permatex Hi-Tack works great on non- bead locks
Great grade on the drainage ditch engineers.
Your content and film quality keeps getting better!
I could watch your cleets pranks all day. What great content
Dry mount should work now. I busted OTR tires and at mining Rig for lot of years. Killer vids that repo was too funny man. Glad the S10 and Justin will be ready to rip!!
When putting tyre's on use hand sanitizer. Thats wat we do for our stockcar class in new Zealand works a treat
Why? Do they get covid?
😂😂😂 this is so fucking funny cleet thought he was outsmarting everyone😂 I died at that video 😂
You must have the coolest neighbors ever lol
Ive been waiting for your video of this. This channel is definitely my favorite
That's incredible, y'all definitely won the prank war!
That’s fn sweet….hell yeah brother!! Dew it for Dale!!!
My engineer 👓 🤣🤣🤣 gold
The white ford almost gives me the equivalent of JH’s potential version of Leroy? History in the making!!!
😂😂😂😂😂 this was so funny good one JH 😂😂😂
you did right keeping Justin happy 🙂
We used to use vulcanizing cement for glueing any off-road tires. Four wheelers/ race four wheelers and mud trucks.
I work in a tire shop and yes, if you have a painted rim and a freshly mounted, slicked up tire; the bead can 100% spin and leak, depending on what you do with your tires. I occasionally hear tiny "sneezes" as the wheels are at full turn, while turning into a parking spot. There's a "just right" amount to use but, any kind of lubricant or sealant needs to be allowed to dry or "cook" away before you can "Hoon" with your fresh tires. Beadlock is the way to go, if you want no spin and to keep your beads from being able to fall off. Well, if it falls off bead locked, you've got bigger problems! 🤣
THAT was funny! Well done guys!
Tire shop guy here, the way you fixed the rim should work, however, you can just use bead sealer next time, I have done it many times without issue.
Your plan was epic and funny as hell!
that s10 would probably sound a lil better with an x-pipe if Justin's looking to keep sprucin' it up
Been there with 15s and 16s on my dmax pulling trucks you need screws in the beads for sure. I tried the bead sealer and sanding the beads down so bare metal with no results.
Keep it coming this is great put a smile on my face
JH im just gonna say your the better man 😂 GOOD SHIT
I have been waiting for this version 🤣
If this wasn’t planned! Man, that is ironic
That song in the intro was cool. Party baby
Justin better be bringing that S10 to cleetus and cars Indy!!
Try a set of those bead grip wheels, they're textured inside the bead and less expensive than beadlocks. I hear a lot of people love them but never tried them myself.
Need to put a set of bloggers on the s10 and sand drag it
This video is going down in history 🤣🤣
The tow truck exchange was too funny.
Came to see the other side of the double prank action and gave the SUB because you all cleaned up yalls mess. Stand up shit guys!
Honestly might be the best VS. video ever
Very kind of you to dig Cleeter some French drains for him.
That's your axle safety tune.... bead slip built in haha
You defiantly won the tow truck battle!
Let’s have a minute to appreciate that mailbox ✌🏽😎