A faster way to make the back is lay 3-4 sticks of glue sticks next to each other between parchment paper and use a clothes iron. Also it should come out smoother.👍
Good tip but if dont wanna wast more that 2 glue sticks use that method from the vid ur s would work even better if u used less by cutting tjem in half then ironing
Gonna be honest, I tried this and it wasn't successful. The rounded tubes make it this difficult and you still need a rolling pin of sorts to make it evenly flat
This is the best video I've seen of this. Everybody else half assed theirs for views and likes. I was very sceptical about this way but after seeing your video I'm gonna give it a shot
Thanks! Going to use this to make a case or at least button covers for a headlamp I keep in my backpack so it doesn't get turned on and run down the batteries.
I'm so excited to do this! I have to wait on a real case from amazon for my new phone but for now I can make a really thick one so I can have some form of protection till it gets here 🖤 thank u dear!
romierenae DIY Thanks for you that I just have to spend 50cents to make this case, and I don't even need to spend about few hundred dolas for a case, so thank you very much 😘😘😘
Ok. Just make sure the glue is really hot and work fast. Make sure to start discharging the glue, for the side, from under the back piece. The hotter the glue, the smoother the results. You can make the side as thick as you want. The harder your press on it the thinner it will be.
I love you. I am using a friend's borrowed phone until I either find mine or buy a new one. First of all as I lost my phone in the first place oh, you can probably tell that I am not the most responsible person. I keep worrying about breaking theirs. Oh and just not having a phone again. Going out-of-state tomorrow with someone who get sick sometimes and has to go to the hospital and I was just having horrible fears about breaking the phone when I needed help. And it might seem silly that I don't want to buy a $9 case on the internet not. But not only do I not have time to do that but I'm not the type of person who will return an item in two days after I find my old phone. So seriously this is fabulous and economic and I already have all of the items. Thank you so so so so very much
I'm liking the concept, however, I believe the execution could've been waayyy smoother&less time consuming. Let me stress the part where I say "I believe" cuz I actually don't know for sure as I've yet to try this out yet and I know all too well how DIY projects can be.. The ideas always seem so solid in my mind but tend to take on a mind of their own once executed.. Usually taking a couple tries for our thought patterns to come together properly lol. With that being said, I'm thinking this was probably your first go at this project, in which case, I think you did a pretty phenomenal job. Although it could've turned out looking a bit better(which I'm sure youd accomplish on your next try) it also could've turned out much, MUCH worse. I'm going to give this a try.. Maybe I'll let you know how it turned out when I'm done... As long as its not a complete fail on my part lol. Thanks!
Thank you for the feedback. I was trying to figure out the whole process and filming at the same time so it probably shows in the final output. This was also one of my first videos so the editing is a bit off. I'm sure I could have made the video more concise. I'm actually thinking of doing of updated version to see if I can simplify it a bit. Good luck at trying this.
You have to make sure the glue is really hot so it's easier to smooth out. My latest video is an updated way of making the case using a hot iron instead of a rolling pin. It's easier to control the smoothness that way.
Muy básico...pero gracias x darme la posibilidad a la creatividad y ponerle algo de color...esyamos en primavera...!!! 😆Jajaja...soy de Pilar ...Argentina...voos?
david ward are you letting it cool before peeling it off? Baking paper (parchment paper) always works for me. You could try a silicone sheet. I have one to catch hot glue drips and it peels right off when it cools. I have never tried using it to make anything though.
romierenae ok I will have to try that and yeah it's cool, trying to get the glue ( I may be using the wrong glue) off the bottom parchment paper it's sticking :( but i am definitely have to try the other way you mentioned and I will definitely leave an update :)
Jelly Berry I won't make any claims. However, you can make it as thick as you want. You can also add bumpers which may aid in protecting the phone. Other than that...hey...it's a homemade phone case and it was fun to make ☺
Sorry. I don't have a video for making a phone case out of silicone. I may do one in the future. You can do a youtube search. Another option is foam sheet. I have a video for making a phone case using foam sheet (halloween). Just check my page if you are interested.
I might be late, but the parchment paper is one of the few materials that the glue doesn't stick to. If you use plasitic wrap tje glue can melt it and go through the phone.
You have got to give this woman credt she did it the hard way and it works and looks brilliantly awesome
Thank you
No thank you for actually doing things right not just doing them for views
Liked my own comment !
While I would love the views I try my best to deliver what I promise. :)
Every video I watch today I will try to remember to comment that they start watching your channel
A faster way to make the back is lay 3-4 sticks of glue sticks next to each other between parchment paper and use a clothes iron. Also it should come out smoother.👍
Thanks for the tip.
Good tip but if dont wanna wast more that 2 glue sticks use that method from the vid ur s would work even better if u used less by cutting tjem in half then ironing
Gonna be honest, I tried this and it wasn't successful. The rounded tubes make it this difficult and you still need a rolling pin of sorts to make it evenly flat
and I also like the feature that you can use ANY base color underneath to let it show through-a wonderful idea-Thank you!
you're welcome. Glad to be of help.
This is the best video I've seen of this. Everybody else half assed theirs for views and likes. I was very sceptical about this way but after seeing your video I'm gonna give it a shot
Thank you.
I think I'm going to experiment with this and possibly put pictures into the mix to see if I can do that. I'm glad I found a very useful video
this is much better that everbody elses as its smooth!
Thank you :)
Savage Cawwott! ikr
Coco Moretti nice work
Coco Moretti nice work
Dodie Is Yellow pages
This is so clever! Definitely going to do this!
Thanks! Going to use this to make a case or at least button covers for a headlamp I keep in my backpack so it doesn't get turned on and run down the batteries.
Great to be of help
SMART! Great diy! That's really smart!
Amira Sano thank you
I find making my own phone case cheaper and so much more fun!😊
Britney Bain. Me too
thank you so much!! i will try and apply this method on the airpods's case. this is just genius!!
I'm so excited to do this! I have to wait on a real case from amazon for my new phone but for now I can make a really thick one so I can have some form of protection till it gets here 🖤 thank u dear!
Glad to be of help.
Great Inspiration I love how you made the best of your resources.
Thank you. I do try to make the best of what I have. :)
@@romierenaeDIY And you do it well.
This one is so smooth and nice!
Thank you
Omg 😮😮😮😮 this is the best method *EVER*
Sabrina Hart ☺ thanks
romierenae DIY
Thanks for you that I just have to spend 50cents to make this case, and I don't even need to spend about few hundred dolas for a case, so thank you very much 😘😘😘
No problem :)
buying one is my favourite method
It works I really love the smooth texture thank you
No problem
You are brilliant!!!!! I will do this for my cell phone and my iPad!
Did it work
The best tutorial!!!! Congratulations from Brasil!!!
Thank you
Love it! Going to do one! Yeah!! Beautiful job! Thank you.
Thank you.
I love it way better than the rest. thank you. the struggle has been real trying to do it the other way.
lisaluvn4 no problem. I'm glad it worked 4 u.
romierenae DIY I'm trying it today but I'm having a hard time with the corners and stuff lol
Ok. Just make sure the glue is really hot and work fast. Make sure to start discharging the glue, for the side, from under the back piece. The hotter the glue, the smoother the results. You can make the side as thick as you want. The harder your press on it the thinner it will be.
This saved my life! Thanks you
No problem
Love your smooth design. Thanks
This is totally worth it! I have Galaxy note which doesn't have much funky covers! Thank you!
No problem
So clever!
Thanks
Now i just need to find my hotglue gun
Uvic _ have you found it now? 😂
I love you. I am using a friend's borrowed phone until I either find mine or buy a new one. First of all as I lost my phone in the first place oh, you can probably tell that I am not the most responsible person. I keep worrying about breaking theirs. Oh and just not having a phone again. Going out-of-state tomorrow with someone who get sick sometimes and has to go to the hospital and I was just having horrible fears about breaking the phone when I needed help. And it might seem silly that I don't want to buy a $9 case on the internet not. But not only do I not have time to do that but I'm not the type of person who will return an item in two days after I find my old phone. So seriously this is fabulous and economic and I already have all of the items. Thank you so so so so very much
No problem. I have another version of the hot glue case on my channel. It's a different method of making the case.
When you gaming and your phone over heats:
Nooo my beautiful phone case!
I really liked your instruction!
omg thanks.. first i make using anyone else method and it is rough..n but i try this its works......
You're welcome. I'm happy it worked for you.
@@romierenaeDIY same with me!! I did it and it turned out almost exactly like yours just .1 away yay!!
@@keira.s1 nice work
OMG its WONDERFUL!!!
Good job, im gonna give it a try in a half an hour and ill let you know how it is!
Thank you a lot, my saver!
No problem. Can't wait to hear how it turned out.
Hi! Its awsome, it looks very cool!!
Thanks again!
@@Rain-in4vc great
Absolutely mind blowing......outstanding...
Thank you
First glue gun project I really want to try, all the others just seem useless to me, great job 👍👍
Peter Wuornos thank you
Yeah its good and actually works
Glad it worked out for you
The comments that you give to your art work was really funny and cute.lol.and yea you are a brilliant one my friend ;)
Thank you
I'm liking the concept, however, I believe the execution could've been waayyy smoother&less time consuming. Let me stress the part where I say "I believe" cuz I actually don't know for sure as I've yet to try this out yet and I know all too well how DIY projects can be.. The ideas always seem so solid in my mind but tend to take on a mind of their own once executed.. Usually taking a couple tries for our thought patterns to come together properly lol. With that being said, I'm thinking this was probably your first go at this project, in which case, I think you did a pretty phenomenal job. Although it could've turned out looking a bit better(which I'm sure youd accomplish on your next try) it also could've turned out much, MUCH worse. I'm going to give this a try.. Maybe I'll let you know how it turned out when I'm done... As long as its not a complete fail on my part lol. Thanks!
Thank you for the feedback. I was trying to figure out the whole process and filming at the same time so it probably shows in the final output. This was also one of my first videos so the editing is a bit off. I'm sure I could have made the video more concise. I'm actually thinking of doing of updated version to see if I can simplify it a bit. Good luck at trying this.
Also instead of rolling the hot glue with a pin you can just put a couple of glue sticks between parchment paper then use an iron to flatten them.
Wow its really great!
U ROCK! 😎
This is a really good idea it looks like my cousins phone case that he got from the shop
Thanks
wow this is so cool plz make more of these vids
I will
Great techniques!!
thank you
This is such a smart idea!
Thank you
I tried it but for the corners its very difficult to me to make it .....good idea maam and a big big thnx for sharing this with us😍😍
Thank you. The corners can be a bit tricky. You have to fill it with enough glue and work fast.
Thanks for the best from algéria
I might have to use this of I can't find a phone case lol
Bravo! Very nice job :)
Thank you very much!
Gracias por él tutorial,me gustó mucho
Awesome! Good job!
Looks awesome!!! Just a question, does the hot glue not damage the phone? I really wanna try this but that kinda freaks me out!
Mariah Lennon I've made a couple of them and my phone is ok. Make sure it's totally wrapped in parchment paper. The glue cools quickly.
this
is
a m a z i n g
Thank you
good job!
Very well done!
Thank you
good idea!!nice work
Excellent!
nice DIY
Thank you
Ur the most smartest person ever
Mine turned out so rough. How did you do it so well!
You have to make sure the glue is really hot so it's easier to smooth out. My latest video is an updated way of making the case using a hot iron instead of a rolling pin. It's easier to control the smoothness that way.
Best one I’ve seen
Thank you
Perfect way to use
Is there another option cause i don't have aparchment paper ? What it would be ? Thanks
Sorry, that's the only option I know of.
awesome work
thank you
Amazing
Bhai hum log butter paper bhi use kar sakthae hai ?????
This is a great video, do you want to hang out sometime? ❤️ So, if I want to use my iron, what setting should it be at?
You are brilliant
Thank you for the compliment.
Instead of parchment paper we can use aluminium foil?
I've never tried aluminium foil. I would suggest trying a little bit of glue with the foil and see what happens.
RESPECT☺
Thanks
Simple nd easy way to buy a new case ..
I like your ideea
Awesome video
Thank you
Good job
Thank you
is it thick enough to protect phone?
When rolling the glue, you can make it as thick or as thin as you want it.
Thicc!
Enakshi Sinha, silicone is better but hot glue works too
+Enakshi Sinha Does it take long to dry?
@@MSHARLEYDWOKEAF i don't think
How do you get the hot glue to not rip off the parchment paper
The hot glue doesn't stick to parchment paper. Once it's cool you can just peel it off.
What do you wrap your phone in so it dose not get to hot
It's parchment paper. Once the glue is dry it doesn't stick to it.
Nice I try this
What can be used instead of parchment paper???
Not sure. Maybe wax paper or something made from silicone
Como é o nome desse material que você cortou junto com a cola?
x-acto knife or box-cutter
Amaxing job new sub
Josephine Patato thanks for the sub
Can I ask what is the background music callled? hehe thanks
Shoulder Closures by Gunnar Olsen. It's in the TH-cam audio library.
What will we do in this life without glue guns??? ❤
Muy básico...pero gracias x darme la posibilidad a la creatividad y ponerle algo de color...esyamos en primavera...!!! 😆Jajaja...soy de Pilar ...Argentina...voos?
kuch aisa chati thi,mstt h sir.......I like it
It black and white it 😎
Omg best case EVER!!!!😁😁🤓🤓
Thanks
Your creative 😀♡
thanks
What type of glue gun did you use? I tried low temp and results weren't the greatest .
I was using a Jobmate gun. If the back of the case came out rough just use a piece of parchment paper and a hot iron to smooth it out.
Pls reply what is that paper that you use for hot glue will not stick
ALBERT TUBER I used parchment paper.
It is so hot na so nothg will hapn to phone? And wat paper u have used?
It is still hot glue so you have to be careful around heat. I used parchment paper that's used for baking.
I have a small problem with the glue sticking to the parchment paper any suggestions ??
david ward are you letting it cool before peeling it off? Baking paper (parchment paper) always works for me. You could try a silicone sheet. I have one to catch hot glue drips and it peels right off when it cools. I have never tried using it to make anything though.
romierenae ok I will have to try that and yeah it's cool, trying to get the glue ( I may be using the wrong glue) off the bottom parchment paper it's sticking :( but i am definitely have to try the other way you mentioned and I will definitely leave an update :)
david ward ok. I may try some other methods and give you an update also. Not for a couple of dyas though.
cover is best but can u trying to colour on it and add glitter on it
They have coloured and glitter glue sticks. You can try those.
You win this time coz it awesome😱
Thank you
Perfect
good job
Thanks
How protective is it, is the real question
Jelly Berry I won't make any claims. However, you can make it as thick as you want. You can also add bumpers which may aid in protecting the phone. Other than that...hey...it's a homemade phone case and it was fun to make ☺
How long does it take?
It takes me about half an hour to make one. On first try it may take longer.
Thanks you so much 🐈
you're welcome.
The most beatifull cover made
I also try 💖
can i do this for my tab??its 7inches?
shailja adhana you should be able to.
tried it but was facing prblm in making a camera hole..
Is the problem cutting it out? Try using an xacto/box cutter knife.
how to make a silicone case?
this one nice, but its very uncomfortable to hold because of the outer edges.
Sorry. I don't have a video for making a phone case out of silicone. I may do one in the future. You can do a youtube search. Another option is foam sheet. I have a video for making a phone case using foam sheet (halloween). Just check my page if you are interested.
th-cam.com/video/i3JXvhnj14U/w-d-xo.html
I dont have a parchment paper ? What else can I use ?
John Benedict Rosales the only other thing I can think of is silicone mats.
John Benedict Rosales hi
I might be late, but the parchment paper is one of the few materials that the glue doesn't stick to. If you use plasitic wrap tje glue can melt it and go through the phone.
if u got a hot glue gun and glue and all that other shit and 2 hours to waste making it ,u dont have the time to go to a shop and buy some paper ? lol
girlsdrinkfeck they maybe have a long way to the shop.
Superb
Thanks