Could anyone tell me what is the max weight this pole can load? I want to use with a softbox and flash (1.0kg) with 3/8 adapter and let my assistant to manage light in wedding photos.
How big is the diameter of the hole in the top? In other words, how big can the XLR connector be to still fit through? I'm hesitant to just buy a cable and then realise it won't fit and might not even be disassemblable like your's.
Most will not fit. I think Rode made a big marketing mistake by saying you could actually thread it - especially since most XLR's these days don't have removable caps like the one in the video. I don't have it on my and so therefore can't measure but I'd say stay away if thats what you want to do with it!
Do you know of an alternative that actually fits XLR cables? I've come across some China-made of questionable quality with fixed cables. But what if that cable breaks?
Why do you test the wind resistance against a fan? The very point of the wind is that it is soundless while the fan´s motor sound will kill all the wind noise.
Right - if we can hear only the motor and the "whoosh" that means it's working - if the sound gets all clipped and nasty we know the wind is getting through to the condensor plate and corrupting the recording.
Hey, Ryan Reynold .... I have one question..... Can we achieve broadcast quality from this setup ? And also... Is the difference between ntg3 and ntg4+ considering ntg3 price is doubled than ntg4 or + also 2 ?
😂Ryan Reynolds lol. Definitely broadcast quality. I can't speak to the differences in those mics as I've never used the NTG4+, I would say the law of diminishing returns is probably at play. For double the price, you probably only get a few percentage points of quality
Yes sir! The MKH416 is almost exactly the same size as the Rode NTG3. This blimp would hold a mic up to 325mm in length, and 22mm in diameter. (MKH416 is 250 x 19)
Are there some camcorders under 5000 dollars that record in 4K/4000some. on -3000 something in 60 FPS proffesional? I need a XLR mic input on the camcorder. I DO NOT WANT THAT CAMCORDER THAT IS NOISY.... Thanks.
How did you remove that plastic part so you could fit it in the boom pole? The head part that can unscrew. Also what xlr cable are you using in the boompole?
There was a simple screw removal around the clamp at the top of the boompole that, once removed, allows the pole to be opened. The issue is you need an XLR that has a removable metal cap (protective cap for the three prongs) so you can fit it through. In this case it was an old XLR I've had for years. They don't tend to make those caps removable much anymore.
As far as wind protection, probably-but what separates the blimp is the high-end clarity that will still pass through the material, while the dead cat tends to muffle the signal a bit
interesting video, hope NO wombats were harmed in the making of this video, hope this is FAKE wombat fur, just a "trade name" :-) , unless you know of a great taxidermist!
I used to be the boom sound guy but now I am the DIRECTOR
Love that. Keep going.
Zachary Tabz that’s watsup. New level!
@@DaveChorowskiMusic ok, boomer
You should have unsolder the XLR connector from the cable and after inserting the cable, you solder it again.
Yes, but still very clumsy and you lose the rubber cap on the base of the tripod.
Could anyone tell me what is the max weight this pole can load? I want to use with a softbox and flash (1.0kg) with 3/8 adapter and let my assistant to manage light in wedding photos.
Great video, no BS talk, ums etc.. to the point Ordered one for my NTG3B
What were the tools you used to un screw them? I'm new at this what kind of tools please?
Thanks for the video. I'm considering a blimp to improve the audio quality recording my tennis matches.
2:35 - "and BOOM!" , no pun intended...
How big is the diameter of the hole in the top? In other words, how big can the XLR connector be to still fit through? I'm hesitant to just buy a cable and then realise it won't fit and might not even be disassemblable like your's.
Most will not fit. I think Rode made a big marketing mistake by saying you could actually thread it - especially since most XLR's these days don't have removable caps like the one in the video. I don't have it on my and so therefore can't measure but I'd say stay away if thats what you want to do with it!
Do you know of an alternative that actually fits XLR cables? I've come across some China-made of questionable quality with fixed cables. But what if that cable breaks?
Recently picked up the Blimp its a great investment
Why do you test the wind resistance against a fan? The very point of the wind is that it is soundless while the fan´s motor sound will kill all the wind noise.
Right - if we can hear only the motor and the "whoosh" that means it's working - if the sound gets all clipped and nasty we know the wind is getting through to the condensor plate and corrupting the recording.
Why you use a Blimp and not just a dead cat/windjammer!?
Why are your nearfield monitors so damn high?!
Hey, Ryan Reynold .... I have one question..... Can we achieve broadcast quality from this setup ? And also... Is the difference between ntg3 and ntg4+ considering ntg3 price is doubled than ntg4 or + also 2 ?
😂Ryan Reynolds lol.
Definitely broadcast quality. I can't speak to the differences in those mics as I've never used the NTG4+, I would say the law of diminishing returns is probably at play. For double the price, you probably only get a few percentage points of quality
Question, do you know if the Rode Blimp will work for the Sennheiser MKH416 Shotgun Mic? Thanks a million for any feedback!
Yes sir! The MKH416 is almost exactly the same size as the Rode NTG3. This blimp would hold a mic up to 325mm in length, and 22mm in diameter. (MKH416 is 250 x 19)
Bro, thank you for conveniently responding. Super helpful and appreciated!!
What is the boom pole that you said will be the back up?
I believe it was called the Rode mini boom pole
Are there some camcorders under 5000 dollars that record in 4K/4000some. on -3000 something in 60 FPS proffesional? I need a XLR mic input on the camcorder. I DO NOT WANT THAT CAMCORDER THAT IS NOISY.... Thanks.
If you're budget is up to $5,000, and you need a camcorder, clean image, 4k and XLR inputs, look no further than this guy: amzn.to/2JwXL2p
Oliver J Hughes thanks
How much weight can boompole pro handle at full 10' feet ? Will the carbon fibre bending ??
Good question! I don't know the details on that, but a full shotgun mic/blimp rig at 10 feet is nothing on the pole.
How did you remove that plastic part so you could fit it in the boom pole? The head part that can unscrew. Also what xlr cable are you using in the boompole?
There was a simple screw removal around the clamp at the top of the boompole that, once removed, allows the pole to be opened. The issue is you need an XLR that has a removable metal cap (protective cap for the three prongs) so you can fit it through. In this case it was an old XLR I've had for years. They don't tend to make those caps removable much anymore.
Sorry I am late to this one Oliver....excellent video as always brother
Thanks Kev, really appreciate it!
Just bought it ; cool video ,)
this mic is huuuuge
Sounds like you can get away with just the deadcat, not a huge difference with the blimp
As far as wind protection, probably-but what separates the blimp is the high-end clarity that will still pass through the material, while the dead cat tends to muffle the signal a bit
I thought the same thing
Can I put here ntg4+?
Yep!
2:35
literally boom
Hahaha - I see what ya did there...
interesting video, hope NO wombats were harmed in the making of this video, hope this is FAKE wombat fur, just a "trade name" :-) , unless you know of a great taxidermist!
Okay Batman.