Converting a Flat Modified Roof System into a Tapered ISO-Board System and Seamless Metal Roof-Part1

Is your roof flat and experiencing pools of standing water?
You might have water damage and not even know it.
Learn how we convert a Flat Modified Roof System into a tapered ISO-Board System in Part 1 of 2.
Get your FREE Roof Inspection Today: get.ajwellsroo...

[@johnlcallaway]

Thanks for the video. We are considering having a similar roof put on our HOA community center and this was very useful.

[@TatsTalks]

Thanks for sharing. Very educational.

[@michaelledford4751]

Going too fast to see the tapered ISO system ? Its a simple 2 piece A panel & B panel tapered system using 2 inch fill,starting at the gutter edge they laid out the A panel which goes from 1/8 inch to 1 inch across the gutter edge,then the B panel that goes from 1inch to 2 inches butts into the A panel running parallel with the gutter edge,next the entire roof deck gets a layer of 2 inch fill ,next they lay a row of A panels overtop the base layer of 2 inch which would be the 3rd row of ISO from the gutter,row #4 they lay a row of B panels parallel to the gutter ,next they cover the roof with a 2nd layer of 2 inch and start back with another row of A panels for row #5 and B panels for row #6 ,then add another layer of 2 inch flat ISO and repeat running A panels for row # 7 and B panels for row #8 ,its an extremely simple system consisting of two tapered panels and one 2 inch thick fill panel ,i used the letters A & B for simplicity's sake,if your roof requires " crickets " between roof drains you would use X & Y panels to build diamonds between your drains to prevent ponding water ,laying out tapered systems is easy as pie unless your roof requires the tapered system to turn corners but a straight shot like this any 12 year old could install with ease .

[@twincam825]

What thick iso board are you using.

[@المهديخاتلبالمجاري]

I am not able to see the iso system. Moving too fast

[@richardhernandez9249]

who makes iso board