GIGA BASS KIT INSTALLED "AFTER" TONE CONTROL - AUDIO SIGNAL TESTING | ACTIVE LOUDNESS

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ต.ค. 2024
  • Contains :
    [06]
    GIGA BASS KIT INSTALLED "AFTER" TONE CONTROL - AUDIO SIGNAL TESTING | ACTIVE LOUDNESS
    In this video discusses the audio signal that is measured from the response of the PINK NOISE signal from GIGA BASS installed after tone control.
    Sample measurement by adjusting the TONE CONTROL pottery & managing the GIGA BASS potentiometer. The initial position of the TONE CONTROL is set to FLAT (all pointer potentiometers at 12 o'clock), then by changing the resistor or potentiometer (variable resistor) on GIGA BASS to get a frequency graph from 20Hz to 20kHz.
    The graphic form can be seen in the video above.
    In this video discusses the audio signal that is measured from the response of the PINK NOISE signal from GIGA BASS installed after tone control.
    Sample measurement by adjusting the TONE CONTROL pottery & managing the GIGA BASS potentiometer. The initial position of the TONE CONTROL is set to FLAT (all pointer potentiometers at 12 o'clock), then by changing the resistor or potentiator variable on GIGA BASS to get a frequency graph from 20Hz to 20kHz.
    The graphic form can be seen in the video above.
    [05]
    GIGA BASS ... IC LM 324 ST - AUDIO TEST & SIGNAL FREQUENCY RESPONSE LOW | ACTIVE LOUDNESS
    In this video discusses the GIGA BASS KIT by using active components IC brand ST LM324 series.
    In the previous video using IC ST series TL084 series.
    From the results of audio tests and response graphs the resulting audio signal is not much different.
    For noise is smaller with TL084 ST IC than with LM324, but in terms of noise the PCB path topology is also very decisive.
    [04]
    REVIEW .. "GIGA BASS WITH IC TL084 - ST", ANALYSIS OF SIGNAL AUDIO & LOW FREQUENCY | ACTIVE LOUDNESS
    In this video discusses the review and test of GIGA BASS KIT with the active component IC TL084 CN brand ST.
    review conducted by conducting an audio signal test by providing a PINK Noise signal generator, thus forming a graph of the work of GIGA BASS IC TL 084 ST.
    In this KIT it is different from the analysis and review of the TURBO BASS kit, because this kit only produces or raises GAIN / dB bass tones only, without raising the frequency high / treble.
    This KIT is perfect for tone control or equalizer, SPECIAL for lifting / raising bass.
    [03]
    TURBO BASS COMPARISON .... IC SAMA LA3600, DIFFERENT KIT | ACTIVE LOUDNESS
    In this video discusses the comparison of 2 units of TURBO BASS KIT using the same IC, but different brands of KIT.
    the DESIGN KIT is almost the same, but the route or topology of the PCB path is slightly different.
    from the results of measuring the audio response signal, the two KITs are similar to the GALAXY KIT.
    The neural measurements of the two KIT are almost the same, only at a high frequency there is a slight shift.
    in my opinion, these two KITs resemble GALAXY using the same IC.
    [02]
    TURBO BASS KIT ... AUDIO TEST & TEST SIGNAL FREQUENCY BASS | ACTIVE LOUDNESS KIT
    In this video discusses the TURBO BASS KIT test with the active component IC LA3600 (Sanyo).
    from the results of audio / music high notes (high) or treble still included in the response to the testing results of this TURBO BASS KIT.
    And it can also be seen from the results of the measurement of the audio response signal produced by this TURBOBASS KIT that still shows its reinforcement, like the GALAXY KIT that I uploaded the video before.
    So that I can also call this kit the GALAXY TURBO BASS KIT, because it's not dominant to lift BASS or accentuate BASS tones.
    [01]
    GIGA BASS / TURBO BASS ... TYPE, TYPE & FUNCTION | ACTIVE LOUDNESS KIT
    In this video discusses GIGA BASS / TURBO BASS / BASS BOSTER with several KIND, TYPE & FUNCTIONS from KIT that are classified as active loudness (GAIN BASE).
    There are 2 kinds of types, first with the regulator swich on / off and second using a potentiometer / rotary resistor / variable resistor.
    For the type there are 2 types as well, firstly the dominant reinforcement in low / bass and high / treble.
    the second is only dominant in bass / low.
    for its function is to increase the gain, increase the dB of the audio signal to be processed or output power amplifer or tone control.
    #ANTHONMITRAAK #SOUNDSYSTEM #POWERAMPLIFIER #AUDIO
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น •