That’s the best paint... people say you need automotive specific paint but I can assure you that is so much better, it’s made to last years outside and the finish of that paint is amazing, in fact any graffiti artist paint is perfect for that
As a pro graffiti writer, I can say that this is the best paint around in this segment. I did a lot of cars in the past with spraycans. None of them were mono colours though, all drawings. I even did a 67 bug at Beetle Bash in the nineties, live in open air in the middle of the runway. At that time Montana didn't even existed and the best brand was Sparvar. I have a 2008 silver panel of my own and I sprayed it in Montana 7070 Stealth (windows down) to match the bumpers. Looks great and a lot more modern as if it's a two tone T6.
Great to see a no BS micrometer filled build from a guy working on his own with a budget..who needs the million pound workshop when you got a barn..well done..keep it up
Thank You for watching and for the comment! I bought it as something to do while in lockdown with the money I had to that should I have been using to go travelling in the Crafter we live in! Fingers crossed this channel will help me to get to a nice clean workshop!
Bearded Colin Furze with Mike Skinners (the streets) voice. Humour aside. What a cracking job my good man! It's a graft but worth every minute of it when you see the results! Keep up the great work! 🙏🙌
Thank You for watching! It is a pretty big job to do with rattle can’s, I think it has turned out pretty well in the end though. Maybe i will try a ‘proper’ paint job next time.....
Looks great nice job , I did a Mini about 30 years ago with rattle cans and was surprised at how well it came out. This is a much bigger project though but looks really good.
Well done for the effort. You prepped it really well. Shame the wind was against you. The only thing to do now if it needs it is a clear coat.😊👍 Do love a bodywork spray job video.
Thank You for watching! Yeah the wind was a bit of a pain but i still wanted to try and show what you can do in ‘real world’ conditions. On your drive or in an open barn and not in a perfectly still sterile spray booth. I think it has turned out ok. No clear coat. This is the finish.
Love this. I'm currently doing rust treatment on my van and in the future will need to repaint. Been looking at various options that I could do myself and this is definitely an option 👍
Love the colour,back in the day I had an ex bt transit that was a very similar grey.great job so far,love the fact that you removed trim to paint and not masked around .
Thank You for watching! I can’t stand when people don’t remove things properly. It is probably more a pain and a faff to mask them all out which will never be done 100% accurately!
I've never seen anyone use spray cans on such a big job mate this is so impressive had to subscribe 👏 cracking job watching this has inspired me to hurry up and get my painting jobs done I've been procrastinating too long!!
Well done Dan!! It's NOT easy, but with time and effort you made cheap rattle paint look great. However, lots of people make expensive 2K paint with a compressor look shite. New subscriber after watching this video.
Thank you for watching and for the comment! I gave it my best shot! I am hoping to give a 'proper' respray with 2K paint a go in a future video. See what we can get that finish like!
Great video, love the colour (my personal choice would be gloss/shine) so I would put a gloss clear lacquer over the top, be a great finish. I have done a few spray jobs with cans, we keep the cans of paint in a hot water bath (Not to hot) camping stove and large saucepan, filled with water, thins the paint, increases the pressure in the can you can have 4 or 5 cans ready to go, does a good job well very reasonable. 😉 It’s coming on nicely though 👍
Thank you for watching! I wanted the matt finish on this van, like the look as it's a little different! Great tip! i kept the can next to an oil radiator all of the previous night and whilst I was spraying to help with the pressure in the cans. It looks much better than when I started!
Thank You so much for watching and for the nice comment! I will have a go at most things, what’s the worst that can happen?! 😂 a fee bits left to do on this then sell it and try to find the next project.
Loving this!!! Montana Gold is awesome, sure you can find it cheaper though. The nozzle you referred to as a fat cap is actually an italic, fat caps give a fast/wide area of coverage, but in a regular circular shape.
Thank You for watching and for the comment! That is the cheapest i could find it! Everywhere else was more expensive. Some on eBay were double the price! Italic makes sense! What ever they are they work really well!
New to the channel,just stumbled across your page and have watched all the episodes,top job you’ve done and the van looks 100times better now after all your work!! 👍🏻👏🏻
Really like this video. My T5 is in need of some paint throwing at it as currently have a front end swap which is a different white to the rest of the van. Was thinking of Rustoleum and rollering (many videos on youtube but looks a mare) but now I've seen this.. it looks a much better job, and so much quicker and easier. This video has definitely given me a bit of a kick to get it done now. Thanks!!
Thank you for watching! I would definitely rather spray like this compared to rollering paint on. The beauty of this paint job is that you can repair any daily use damage so easily!
The primer looks great, will be even better with the topcoat. 😉 joking the grey looks great and better than I have seen from some so called professional bodyshops...
@@DanChambersDAC I while back I painted whole front and rear bumpers on a metallic black bmw 3 series, was a company car going back at end of lease, all with spray cans came out perfect, the guy who picked up even said the car was mint as they usually have scrapes and knocks when they go back 👍
Dan I’m gobsmacked over how good your paint job looks (on camera)! Also would you consider doing a short video on the Solar PV installation on the big shed please? I’m sure there will be interest...stay well and prosper young man
Thank you for watching and for the nice comment! Tbh I don't really know anything about the PV system. It is a set up that was installed years ago. I will see if i can do any digging and find out any information.
Thank You for watching and for the comment! It does look real good now it is mostly back together! Need to address the finish of the front bumper still though.
The ven looks good, I like the color but the paint isn't as hard wearing as you think. I did my old MX5 with the same paint. It looked great but after a few months I did have to do a lot of touching up.
Thank You for watching! I have a few friends that have van’s painted in it and they have said it holds up pretty well 🤷🏼♂️ the beauty of this paintjob is that it can be touched in easily and cheaply if needed though.
@@DanChambersDAC the one thing I was going to do was to put a Matt clear coat over it, just to keep it from fadeing and to make it more hard wearing. I bought the clear from Graffcity too
Took your tip so I ordered a couple of tins to compare as Im not sure how it looks (in real life). NOWHERE can match the price OR the colour I want . RUSTOLEUM cant match the colour either and I dont dig the 'orange peel' effect - so its THIS! UPDATE: Ordered the colours I have chosen on a bit f the van from Graff city and its MEGA! Thanks for the tips! Sprayed a small bit of the van and it looks great.
Thank You for watching! The paint lay’s down pretty flat to be fair. Not much of any orange peel. It all obviously depends on how you lay the paint though.
This is a great vid! You make it look easy 👍 Do you know how this paint looks over time and how it lasts? Weighing up between this and roller Ing rustoleum. Keep up the good work!
Thank you for watching and for the comment! The paint last's pretty well if looked after. Most people apply a coating of wax, sometimes anchor wax (Yes wax for boat anchors!) to protect the paint.
Stunning job, love the colour. Would be nice to see it lacquered to get a shine out of the paint. Did you do any rubbing down between coats? New camera gave a better picture quality as well 👍
Thank You for watching! No lacquer on this one, wanted a matt/satin finish. Not sure how a clear would look over this tbf. No rubbing between coats. Seems to have gone on ok though.
Loving the videos. I might have missed it on your other videos, but what is your plan for the van? Windows, interior, power? I'm loving the van revamp on a budget, it looks great so far.
Thank you for watching! This van will be simple really, no conversion etc just a tidy up to a clean base vehicle ready for the next owner to do their own thing.
Ok that’s amazing!! Out of curiosity how many cans were used on the van? my friend wants to do his 🙈the van is currently blue and full of stone chips lots of prep to do
Top effort here, interesting to see the paint choice. Small tip but kurust is generally a no go for this sort of application, in fact any application 😆, it always comes back. In future use one of the bilt hamber products instead for any bodywork repairs. On a side note I noticed you seemed to spray the top coat directly to the sections you took back to metal? Or was there actual primer applied first to those sections or is the paint you are using self priming or something?
Thank You for watching and for the comment! I gave it my best go! I really want to have a go at a ‘proper’ paintjob with clearcoat etc. See what finish i can achieve.
That’s the best paint... people say you need automotive specific paint but I can assure you that is so much better, it’s made to last years outside and the finish of that paint is amazing, in fact any graffiti artist paint is perfect for that
Thank You for watching and for the comment! It is pretty decent stuff!
As a pro graffiti writer, I can say that this is the best paint around in this segment. I did a lot of cars in the past with spraycans. None of them were mono colours though, all drawings. I even did a 67 bug at Beetle Bash in the nineties, live in open air in the middle of the runway. At that time Montana didn't even existed and the best brand was Sparvar. I have a 2008 silver panel of my own and I sprayed it in Montana 7070 Stealth (windows down) to match the bumpers. Looks great and a lot more modern as if it's a two tone T6.
Thank god for youtube recommendations. Loving this build/project so far👍
Thank you so much for watching and for the nice comment! Glad you are enjoying it!
Great to see a no BS micrometer filled build from a guy working on his own with a budget..who needs the million pound workshop when you got a barn..well done..keep it up
Thank You for watching and for the comment! I bought it as something to do while in lockdown with the money I had to that should I have been using to go travelling in the Crafter we live in! Fingers crossed this channel will help me to get to a nice clean workshop!
Yes COLOUR !!!. Your van, = Your colour Choice, Great Paint Job, Great Video.
Thank you for watching and for the comment! Exactly that!!!!
Lovely Jubbly, enjoyed that, great enthusiasm.
Thank you so much for watching!
Bearded Colin Furze with Mike Skinners (the streets) voice.
Humour aside. What a cracking job my good man! It's a graft but worth every minute of it when you see the results!
Keep up the great work! 🙏🙌
Thank you for watching and for the comment! 🤣 I'll take that! Was such an enjoyable project.
£100 paint job don't think anyone can criticise what you've done for that amount of money top job fella
Thank you for watching! That's it, a few comments are missing that this has been done for not a lot at all and to show what you can do!
Thanks for another good van build Dan. Enjoying this one as much as the last one✊🙂👍
Thank You for watching and for the comment! Videos are proving a lot more popular than i expected!
REALY LOVE THE STYLE OF THE WHEELS THEY LOOK FAB
Thank You for watching! Yes they are such a nice simple wheel.
Great job fella! I would never have the balls to spray a whole van with rattle can paint!
Thank You for watching! It is a little daunting but i just broke the van down into panels/areas to work and it doesn’t seem as daunting then!
Respect to you Dan, that’s a big project to take on with paint out of a can, enjoying this journey with you 👍
Thank You for watching! It is a pretty big job to do with rattle can’s, I think it has turned out pretty well in the end though. Maybe i will try a ‘proper’ paint job next time.....
That is a fine example of craftsmanship 😄👍🏻. Keep up the good work.
Thank You for watching and for the comment! Turned out well didn’t it!
Looks great nice job , I did a Mini about 30 years ago with rattle cans and was surprised at how well it came out. This is a much bigger project though but looks really good.
Thank you for watching! I think it is mainly in the prep. This spray job is not a 100% perfect respray but it looks so much better than it did!
Well done for the effort. You prepped it really well. Shame the wind was against you. The only thing to do now if it needs it is a clear coat.😊👍 Do love a bodywork spray job video.
Thank You for watching! Yeah the wind was a bit of a pain but i still wanted to try and show what you can do in ‘real world’ conditions. On your drive or in an open barn and not in a perfectly still sterile spray booth. I think it has turned out ok. No clear coat. This is the finish.
Loved it! Loved the colour and the simplicity of what your doing
Thank you for watching and the amazing comment! Turned out OK hasn't it!
Glad I stumbled on your channel, love the simplicity of the rebuild, lower it, carpet, rub down and paint - and the colour is spot on 👌🏻
Thank you for watching and for the nice comment!
Great to see you have done all this your self. Much respect. Great job
Thank you so much for watching and for the comments! Really appreciated!
Just found your channel. Really enjoyed the spray painting. Nice one bud. 👍🏻👍🏻👍🏻🏴
Thank You so much for watching!
Love this. I'm currently doing rust treatment on my van and in the future will need to repaint. Been looking at various options that I could do myself and this is definitely an option 👍
Thank You for watching and for the comment!
Love the colour,back in the day I had an ex bt transit that was a very similar grey.great job so far,love the fact that you removed trim to paint and not masked around .
Thank You for watching! I can’t stand when people don’t remove things properly. It is probably more a pain and a faff to mask them all out which will never be done 100% accurately!
I've never seen anyone use spray cans on such a big job mate this is so impressive had to subscribe 👏 cracking job watching this has inspired me to hurry up and get my painting jobs done I've been procrastinating too long!!
Well done Dan!! It's NOT easy, but with time and effort you made cheap rattle paint look great. However, lots of people make expensive 2K paint with a compressor look shite. New subscriber after watching this video.
Thank you for watching and for the comment! I gave it my best shot! I am hoping to give a 'proper' respray with 2K paint a go in a future video. See what we can get that finish like!
Love the rattle can gun not seen anything like that before, 👍
Thank You for watching! Great little tool. Does make it a little easier on the fingers 😂
I ordered one the minute I finished watching the video 😂
Great video, love the colour (my personal choice would be gloss/shine) so I would put a gloss clear lacquer over the top, be a great finish.
I have done a few spray jobs with cans, we keep the cans of paint in a hot water bath (Not to hot) camping stove and large saucepan, filled with water, thins the paint, increases the pressure in the can you can have 4 or 5 cans ready to go, does a good job well very reasonable. 😉
It’s coming on nicely though 👍
Thank you for watching! I wanted the matt finish on this van, like the look as it's a little different! Great tip! i kept the can next to an oil radiator all of the previous night and whilst I was spraying to help with the pressure in the cans. It looks much better than when I started!
This looks dope dude, your very inspiring to all the driveway modders out there x
Thank You for watching! I wanted to show you can do most of these things on your drive if you want to and get a decent finish!
Colour is great,grey is the fashion colour now anyway!
Thank you for watching! Exactly! I like it.
amazing what you have achieved with spray cans
Thank You for watching! It is hardly 100% paintshop perfect but it certainly looks a lot better!
Mate it looks EPIC what a guy! Not afraid to have a go are ya?
Keep the episodes coming
Class act!
This is what TH-cam is all about 👏🏼👏🏼
Thank You so much for watching and for the nice comment! I will have a go at most things, what’s the worst that can happen?! 😂 a fee bits left to do on this then sell it and try to find the next project.
It's going to look ace, nice colour choice 😎🇬🇧👍
Thank you for watching and for the comment!
Love the colour and finish! Just prepping my bug ready to paint the same way.....
Thank you for watching! A bug would look pretty sick painted like this! Are you on insta? Be good to see how you get on.
I just stumbled on this video and I've got to hand it to you mate, that looks pretty decent for the money.
Thank you for watching! It certainly looks better than it did!
Loving this!!! Montana Gold is awesome, sure you can find it cheaper though.
The nozzle you referred to as a fat cap is actually an italic, fat caps give a fast/wide area of coverage, but in a regular circular shape.
Thank You for watching and for the comment! That is the cheapest i could find it! Everywhere else was more expensive. Some on eBay were double the price! Italic makes sense! What ever they are they work really well!
Them results from a can! Fair play mate
Amazing my brother 🙏❤️
Thank you so much for watching and for the comment.
Top man it looks great for the price love watching what you do if you are happy with it that’s what matters 👍
Thank You for watching and for the comment! Im super happy with how it looks!
wish you were around last year, great work, makes me want to do another van!!
Thank you for watching! Sorry! Been considering a channel to do this on for a while!
Nice video Dan, new camera looks good. Think I'll go and have a butchers at the first video in the series mate 👍
Thank you for watching and for the comment!
Fantastic mate ,looks amazing
Thank you for watching and for the comment!
I liked even before watching... Good detail, good commentary.. Great video
Thank You for watching, the like and the comment!
New to the channel,just stumbled across your page and have watched all the episodes,top job you’ve done and the van looks 100times better now after all your work!! 👍🏻👏🏻
Thank You for watching and for the comment! Im pleased with how it has turned out. B5 S4 😏 one of my favourite motors 👌
Dan Chambers yeah they are great motors(when running😂🙈)....
Go on...cover it with a nice coat of lacquer...you know you want to...!
Thank you so much for watching! Nah, Satin looks so much better!
Really like this video. My T5 is in need of some paint throwing at it as currently have a front end swap which is a different white to the rest of the van. Was thinking of Rustoleum and rollering (many videos on youtube but looks a mare) but now I've seen this.. it looks a much better job, and so much quicker and easier.
This video has definitely given me a bit of a kick to get it done now. Thanks!!
Thank you for watching! I would definitely rather spray like this compared to rollering paint on. The beauty of this paint job is that you can repair any daily use damage so easily!
Looking good is that, Those can guns are great things.
Thank You for watching! Such a simple but effective tool! Certainly takes the strain foo your finger!
Love the colour, I might be biased I always primer my projects and leave em at that👍🏻 I will be painting m cousins T25 in that colour 😀
Thank you for watching! Simple yet effective isn't it! You on insta? Be good to see what you do!
Good job nice to see proper d.i.y job and what can be done low budget not all us vee dubers have deep pockets
Thank You for watching! That is what i wanted to show! You don’t need deep pockets to build something cool!
The primer looks great, will be even better with the topcoat. 😉 joking the grey looks great and better than I have seen from some so called professional bodyshops...
Thank you for watching! 🤣 I really like the colour and finish, wanted to show you don't need a sterile environment to do it!
@@DanChambersDAC I while back I painted whole front and rear bumpers on a metallic black bmw 3 series, was a company car going back at end of lease, all with spray cans came out perfect, the guy who picked up even said the car was mint as they usually have scrapes and knocks when they go back 👍
Dan I’m gobsmacked over how good your paint job looks (on camera)! Also would you consider doing a short video on the Solar PV installation on the big shed please? I’m sure there will be interest...stay well and prosper young man
Thank you for watching and for the nice comment! Tbh I don't really know anything about the PV system. It is a set up that was installed years ago. I will see if i can do any digging and find out any information.
Can gun is a cracking tool from pound shops. Mad4motors channel would do the same , its all in the prep . Good result and it is fun .
Thank You for watching! Works really well and takes the strain off your finger. I will give them a look up and see what they are about!
Xlent job Dan.nice colour
Thank you for watching and for the comment!
Thinking about giving my mx5 some rattle can treatment, especially the Montana stuff
Thank you for the comment and for watching! Go for it, It's great stuff!
Decent job with cans mate well done
Thank You for watching! Turned out ok didn’t it all things considered!
Wow, you are a grafter! Superb job!
Thank You for watching!
Epic. Well done, inspirational. Thanks 🙏 🙏
Thank You for watching and for the comment! So glad people are enjoying watching.
Brilliant job mate well done
Thank You for watching and for the comment!
Looks mega! Nice work 🤘
Thank you so much for the comment!
That looks sweet, nice job!
Thank You for watching!
Unreal job
Looking good 👌🏻 whenever I paint anything I always say it looks good in the primer grey! Big fan of grey though 😝
Thank You for watching! I really like it! Looks so much better than the red!
Well done, looks good.
Fair play mate. looking amazing
Thank You for watching!
Great video. I like the colour too. Ignore any naysayers mate
Thank You for watching and for the comment! Can't please everyone!
Fair play to you for your efforts, think is gonna look good when it’s all back together. Love your enthusiasm too 👍👍
Thank You for watching and for the comment! It does look real good now it is mostly back together! Need to address the finish of the front bumper still though.
The ven looks good, I like the color but the paint isn't as hard wearing as you think. I did my old MX5 with the same paint. It looked great but after a few months I did have to do a lot of touching up.
Thank You for watching! I have a few friends that have van’s painted in it and they have said it holds up pretty well 🤷🏼♂️ the beauty of this paintjob is that it can be touched in easily and cheaply if needed though.
@@DanChambersDAC the one thing I was going to do was to put a Matt clear coat over it, just to keep it from fadeing and to make it more hard wearing. I bought the clear from Graffcity too
Great job, well done.
Thank you for watching and for the comment!
Just subscribed mate, fair shout on the work your doing, I used to like your old t5 with the Bentley wheels (so much I put some on mine 😂)
Thank you for watching, the sub and comment! I miss that van so much! The Bentley’s were a real strong look! Such a nice simple wheel.
Took your tip so I ordered a couple of tins to compare as Im not sure how it looks (in real life). NOWHERE can match the price OR the colour I want . RUSTOLEUM cant match the colour either and I dont dig the 'orange peel' effect - so its THIS!
UPDATE:
Ordered the colours I have chosen on a bit f the van from Graff city and its MEGA! Thanks for the tips! Sprayed a small bit of the van and it looks great.
great videos, well done!!! How about clear coat... not necessary? not wanted? cheers!
Thank You for watching! No clear coat on this, i want the matt finish!
Looks so good 👍👍
Thank you for watching!
Awesome job.
Thank you for watching and for the comment!
Tip: wet the floor especially there will get the dust out of paint and air to prevent going into paint
Thank You for watching and for the comment! Great tip, Will use that one next time!
Can you repeat that but use better english as i didnt understand it
Looks fantastic. Fancy trying doing it to a t5 shuttle with 650k lol
Thank you for watching! It looks much better than it did! 650K, that's impressive!
@@DanChambersDAC it's not bad. Drives like a 65k just body work let's it down. Need to find someone to give me a raptor or Matt look
You need to put a nice black sun visor on it will really set it off with the black bumper .
Thank you for watching! Not a bad shout that, didn't think of that!
I like that. What is the quality of the paint in detail on the surface? Like orange skin or is it like a proper paint job with a professional gun?
Thank You for watching! The paint lay’s down pretty flat to be fair. Not much of any orange peel. It all obviously depends on how you lay the paint though.
This is a great vid! You make it look easy 👍
Do you know how this paint looks over time and how it lasts? Weighing up between this and roller Ing rustoleum.
Keep up the good work!
Thank you for watching and for the comment! The paint last's pretty well if looked after. Most people apply a coating of wax, sometimes anchor wax (Yes wax for boat anchors!) to protect the paint.
Like the colour mate looks loads better 👌
Thank You for watching! It really does doesn’t it!
looks great,good job.
Thank You for watching!
i like it should look great with everything back on it
Thank You for watching! It really does look cool built back up!
Love this colour, wish I could respray Viktor this colour.
Thank you for watching! Go for it dude!
@@DanChambersDAC Would you spray your Crafter this way?🤔
Stunning job, love the colour. Would be nice to see it lacquered to get a shine out of the paint. Did you do any rubbing down between coats? New camera gave a better picture quality as well 👍
Thank You for watching! No lacquer on this one, wanted a matt/satin finish. Not sure how a clear would look over this tbf. No rubbing between coats. Seems to have gone on ok though.
Loving the videos. I might have missed it on your other videos, but what is your plan for the van? Windows, interior, power? I'm loving the van revamp on a budget, it looks great so far.
Thank you for watching! This van will be simple really, no conversion etc just a tidy up to a clean base vehicle ready for the next owner to do their own thing.
Ok that’s amazing!! Out of curiosity how many cans were used on the van? my friend wants to do his 🙈the van is currently blue and full of stone chips lots of prep to do
Thank you for watching and for the comment! I used 22 440ml can's of grey to paint the van. I used 4 can's of primer to repair the areas.
Never clicked on a video so fast!!!
Thank You Dude!
Proper "Cuba rebuild" ..!!
Looks awesome.. 😎👍
💷 🎨 🚐
Great colour
Thank you so much for watching!
Love the colour 🔥
Thank You for watching! So do i! Subtle but with a difference...
Great can job...😀
Thank You for watching! Turned out OK!
Love the quality of the vids👌
Thank You for watching and for the comment!
Top effort here, interesting to see the paint choice. Small tip but kurust is generally a no go for this sort of application, in fact any application 😆, it always comes back. In future use one of the bilt hamber products instead for any bodywork repairs. On a side note I noticed you seemed to spray the top coat directly to the sections you took back to metal? Or was there actual primer applied first to those sections or is the paint you are using self priming or something?
Did you seriously not see the yellow primer over the bare steel 🤦🏻♂️
Warship Grey 🤙🏻
Picture is great with new camera
So much better isn’t it’ why didn’t i buy one sooner 🤦♂️
Amazing 👌
Thank you for the comment and for watching!
Nice job... Are you going to lacquer over the paint or leaving mat? Thanks
Thank you for watching! No Lacquer, will be leaving it matt. Like it as it is a little different!
good effort young man take it from a 20 plus year paint spryer
Thank You for watching and for the comment! I gave it my best go! I really want to have a go at a ‘proper’ paintjob with clearcoat etc. See what finish i can achieve.
@@DanChambersDAC im sure you will , just subed to your channel
Great job you are going mate.
What color code this is?
Keep it up👌✨🚐
... Ok i got it from description😜
Thank you for the comment and for watching! Glad you found it, I really like the colour!
Hello a great video perfect 👍👍👍from Germany 🇩🇪 👋👋👋Kai
Thank You for watching!
Cool job butty. Few squid saved there hey?
Thank you for watching and for the comment! Yeah the quote I had for a 'Proper' paint job was a lot higher!
What are they wheels off Dan? And how much did you lower it? Great video I have a red transporter and thinking of doing the same.
that grey would realy bang with a metalic clearcoat on the top ;)
Thank you for watching! Yes it would look pretty good, I want the matt finish though as it is a little different!
Decent video mate, love seeing things like this. Did you do multiple coats? Or is the 50% over lap sufficient? Cheers
Thank you for watching and for the comment. This was just one thick coat with 50% overlap. This paint covers so well!