Thank you bro. I am having a SS stove (Surya) which is 35 years old..Of late we had low flame problem and I bought a new one- glass top...3 burners ..auto ignition...worked well for one year...but the gas inlet tube got broken while fixing the rubber tube..As I was searching TH-cam, saw your video and my old stove is almost same as what you demonstrated..I just followed your instructions in cleaning the parts and when I I tried it works very well.. So your video has given a new lease of life to the old stove and saved me money.. Thank you 😊
2 thumbs up.This video saved me money of buying new gas stove. Recently i was having problem of low flame on my single burner steel gas stove. I tried the usual pin method to clean the gas orifice. But it solved the problem temporarily for a few days only. Then it is low flame again. So, i was thinking of buying new gas stove. After watching this video, i completely cleaned the gas stove parts and now my gas flame is high. Thank you.
because it is a taper fit, and a soft brass part.. you can take some fine emory cloth and polish the valve which is worn, and quite possibly re-use it. the inside of the valve body will also be worn in a similar way... so some polishing there would be good. Clean everything very well before putting it back together. A simple tea cup will hold your parts, keeping them clean, and freeing up your hands to work.
Sir I appreciate your heart to teach us so honestly. Hats off, it was a wonderful Vedio with much aware of giving us knowledge, sat my thanks to your son. God bless both of you
May be i had left a few names like controller knob. When we remove we need to watch and remember how we removed. Group the screws on a separate paper. True with assembling that some washers placement and burner seating must be checked but nothing is dangerous in cleaning to the level i had explained. Next time when i clean let me make one video keeping in mind the important checks to be done. Generally there is no difficulty in assembling but let me share.
yes sealant is used when the total controller from the main pipe is changed, that i had explained at the end of the video. . For removing or cleaning the jet as i do in the video we don't need any sealant when we screw back.
Which kind of cleaning material used to nozzles?is any problem if any nozzle MIS fited instead of it's original place? (I,e, right side nozzle fitted in left side.)
We can use kerosene or just with soup water and a pin. When you say Nozzle i think you are talking about gas stove Jet which has a tiny hole to release gas to burner. It is not good to interchange the jets because in some gas stove the left burner size is bigger than the right side burner size as in my video. Even if you had interchanged by mistake you can find it with the help of the flame in each burner. The bigger burner may not glow well. So It is good not to interchange the nozzle or jet.
Sometimes it is hard if the knob is touching the body. If the knob is hard to rotate after sometime of usage and when cold it is smooth, then you need to correct the placement of burner. The burner end touching the jet transfers heat of the burner to the controller jet. watch the video at 1.05 the min. You can see the burner that is around the controller and should not touch. If it touches and transfers heat then the copper controller expands and is hard to turn when we are using the stove . Try checking (y)
Sometimes it is helpfulp if the knob is touching the body. If the knob is hard to rotate after sometime of usage and when cold it is smooth, then you need to correct the placement of burner that transfers heat of the burner to the controller jet. watch the video at 1.05 the min. You can see the burner that is around the controller and should not touch. If it touches and transfers heat then the copper controller expands and is hard to turn when we are using the stove . Try checking (y)
Thank you for the video.i think my stove had the jet replaced when I had a pipeline connection.Now when I got the Log cylinder connection, the stove's sim gives greater flame, that is I get high flames all the time. Sir can you give me a solution for this. Is replacing the jet enough or should I replace the whole valve?is jet available in market?
Now with the cylinder if your sim flame and high flame has some difference, your jet change will correct it BUT if your flame is same at sim and at high then the jet is not the problem but the regulator that controls from sim to high. Yes jets are available with few sizes in the local gas stove shop. Need to take your jet to see the type of jet. You can check the change in hole size seeing through it. Good day.
@@ayyamperumalr Thank you for the reply Sir.The flame sim is lesser than in High but not like it should be ideally.It results in excessive burning of utensils.I changed the jet but the problem is persisting.
@@cyrilcbis at 4.18 th minute of the video you can see the valve that helps to regulate the gas flow into the burner. The part as shown in 8.05 th min, If you get the inner valve part with smaller hole you can try changing. Replacing removing the total valve is not advisable , as there are chances of leakage. Try with a lower size jet or valve else give to the service person. Good day.
in all the towns and cities there will be shops for gas stove repair and they will have this. I just enquired in the main bazaar of my town and after few inquiries i was aware that there are two shops and they also showed me the direction to reach the shop.
How to unscrew the 2 big nut-like screws on the 2 sides of the gas metal pipe? I have seen a gas stove cleaner who goes door to door to clean gas stove. He passes a rag soaked in kersone into the metal pipe and cleans the metal pipe.
Yes you can use but there is nothing to repair in the gas knob but replace when broken. Gas knob is the plastic knob that we turn to increase or decrease the flame.
I appreciate ur efforts to make this video sir ..... Actually i was nt sure about my gas stove .... By watching ur video i think it's pretty easy..... Thank you
Thanq sir little English knowledge my gas stove one burner is high flame ,red colour flame spoils my vessels black colour and sound also comes what can I do sir please tell me
Red flame, you must clean the burner by putting into washing soda and hot water. You can also try putting a pin into each hole to clean it when inside the hot water with washing soda.
My stove near the gas entry pipe side small burner . 1. In that side on off knob is very tight even in cool condition and also after assemble. 2. Normally i notice some leakage smell every morning after wake up. 3. Also while burning heavy heat produce in stove . 4. Big burner side flame is very low ..i cleaned last month still same problem
Hi sir, nice topic flame when I full open that time automatically LPG flame 0ff my original condition full open it is in medium film how to get this please help me
Kesavan Mariyappan clean the burner well with washing soda. the mistake is in the air mixture. if it doesn't off when slowly raised it is not a problem
Don't try removing the LPG hose connecting reducer/adapter. because all the connections to the main long pipe needs more care. It needs sealant when screwing back and proper leakage must be tested.
Don't try this do you understand properly tha gas stove if u will do other wise is very Danger i see fire problems many homes self service because I am tecnision
Since you are a technician you know that removing the gas controller and fitting it rightly is important and other things are not that dangerous. Anyway need to do things with caution.
Thank you bro. I am having a SS stove (Surya) which is 35 years old..Of late we had low flame problem and I bought a new one- glass top...3 burners ..auto
ignition...worked well for one year...but the gas inlet tube got
broken while fixing the rubber tube..As I was searching TH-cam, saw your video and
my old stove is almost same as what you demonstrated..I just followed your instructions in cleaning the parts and when I I tried it works very well..
So your video has given a new
lease of life to the old stove and saved me money..
Thank you 😊
2 thumbs up.This video saved me money of buying new gas stove. Recently i was having problem of low flame on my single burner steel gas stove. I tried the usual pin method to clean the gas orifice. But it solved the problem temporarily for a few days only. Then it is low flame again. So, i was thinking of buying new gas stove. After watching this video, i completely cleaned the gas stove parts and now my gas flame is high. Thank you.
Well explained, Sir. Nice that your son is so involved. God bless him
🤦🤦🤦🤦
பெருமை கொண்ட தந்தை ,அழகான மகன் புகைப்பட வல்லுநர் ,மிகவும் பயனுள்ள செய்தி ,நானும் இதை செய்யவே தற்போது முயன்று கொண்டு இருக்கிறேன் . மிக்க நன்றி அன்பரே
Nice Demo. Very much narrative and easy to follow. Thanks.
Thnx so much sir
Maine Aapka video Dekh kar stove ko khola Aur switch ko saaf kiya....
That's very useful video, thank You so much and spacial thanks for the camera man 😃
Thank you for showing this to us. May Supreme Lord Sri Krishna bless you & your family. Hare Krishna.
Thank you for the video, good explanation. I just followed & clean the stove. Keep it up.
Thank q sir, unga video ve parthu stove sari seithute, 150rs laabam, nanri
Quite useful in repairing gas stove, thanks!
How to repair automatic stove burner
the difference is just in the igniter. cleaning the tip is enough else need to identify the ignition type and replace it.
Thanks! quite useful - keep posting :)
thanks dear keep loading videos, these r very useful.
thanks, something I was looking to repair my stove
Kha par rhata he
Yah shab galat jankari he asha koi mat karana ghar par denjar he
jio phone.📱
very informative ...Thanks so much...
good idia thank you
because it is a taper fit, and a soft brass part.. you can take some fine emory cloth and polish the valve which is worn, and quite possibly re-use it. the inside of the valve body will also be worn in a similar way... so some polishing there would be good. Clean everything very well before putting it back together. A simple tea cup will hold your parts, keeping them clean, and freeing up your hands to work.
Capt Larry -
OK , thanks ..
and your "cameraman" did very nice work !
congrats .. Cam man !! ;)
மிகவும் பயனுள்ள வீடியோ.நன்றி.
Sir I appreciate your heart to teach us so honestly. Hats off, it was a wonderful Vedio with much aware of giving us knowledge, sat my thanks to your son. God bless both of you
. x
Program
Madda gudu
Video
good one sir.....thank you both
It would be better if part names also mentioned. Your son did a good job (The cameraman) hope you will come with assembling video also.
May be i had left a few names like controller knob. When we remove we need to watch and remember how we removed. Group the screws on a separate paper. True with assembling that some washers placement and burner seating must be checked but nothing is dangerous in cleaning to the level i had explained. Next time when i clean let me make one video keeping in mind the important checks to be done. Generally there is no difficulty in assembling but let me share.
தமிழ் தெரியும் பின்பு ஏன் இரண்டு மொழிகளில் தங்களின் உரையாடல் இருந்தால் நல்லது
அருமையான பதிவு நன்றி
thanks. mine was a little bit different . but the video was useful.
very useful
very useful
Diary Jaf are
+sayema ashab o
+sayema asygyxyhab 8 y
Thank you sir,it is useful
follows the instructions, got the result .thanks
Ayyamperunaml... thank you. We see indian made stoves here in the United States, so it is good to see one taken apart.
Well explained sir ..thnkk you so muchh for this video🙌🙌🙌
Ayyamperumal useful video thank you so much
very nice information.My wife is very happy
Very helpful video... Thanks
Thank you for sharing your knowledge and skill. Whether nozzle thread fixing, any thread sealing agent is used in case of cooking gas ?
yes sealant is used when the total controller from the main pipe is changed, that i had explained at the end of the video.
. For removing or cleaning the jet as i do in the video we don't need any sealant when we screw back.
Which kind of cleaning material used to nozzles?is any problem if any nozzle MIS fited instead of it's original place? (I,e, right side nozzle fitted in left side.)
We can use kerosene or just with soup water and a pin. When you say Nozzle i think you are talking about gas stove Jet which has a tiny hole to release gas to burner.
It is not good to interchange the jets because in some gas stove the left burner size is bigger than the right side burner size as in my video. Even if you had interchanged by mistake you can find it with the help of the flame in each burner. The bigger burner may not glow well. So It is good not to interchange the nozzle or jet.
Excellent work sir, thank you
மிக்க நன்றி மேலும் சிறிய கருவிகளை பற்றி பதிவிட வாழ்த்துகள்.
Thanks for suggestion it's helpful 😊👍
Will definitely share this video with friends and family members.
If we buy a local stove, does the two Bernal one get ripped off?
Tell me whether or not you Is there any harm in taking local?
Thanks so much......
babu pradeep y
useful video pls upload how to assemble gas stove
True reassembling may require little care at certain places and next time i will add that. Else we can work back (y)
Ayyamperumal Thanks so much .How to reduce big flame at air vent.
JHP Creations check the burner seating with the base. clean the holes of the burner and the total burner with no oil traces
Tq very much sir
JHP Creations
Thanks sir
vinod kumar
Your son is very preety. let him train what he want to do .
Thnk u so its very hlpfull fr me
Very useful video.. thank you
bhai tester ka use current check krne k lia kia jata hai aap tester ka use na kare
video achchha tha.
on & of swich remove next pitting on the (greees use) to adjust best or nonne best ?????====
grease is less useful as it heats up.
Thank u brother.. Your explaination very super.
Good,you have not clean gas pipe.
Thanks..... very useful
sundir darshan build no 4 4o3 mira road
Thanks for the info. One of my gas knob does not move. It is dead stuck. What should I do?
Sometimes it is hard if the knob is touching the body. If the knob is hard to rotate after sometime of usage and when cold it is smooth, then you need to correct the placement of burner. The burner end touching the jet transfers heat of the burner to the controller jet.
watch the video at 1.05 the min. You can see the burner that is around the controller and should not touch.
If it touches and transfers heat then the copper controller expands and is hard to turn when we are using the stove . Try checking (y)
5:14
Knob is too hard to turn ,Does Adjustment of screw helpful?
Sometimes it is helpfulp if the knob is touching the body. If the knob is hard to rotate after sometime of usage and when cold it is smooth, then you need to correct the placement of burner that transfers heat of the burner to the controller jet.
watch the video at 1.05 the min. You can see the burner that is around the controller and should not touch.
If it touches and transfers heat then the copper controller expands and is hard to turn when we are using the stove . Try checking (y)
nice videos thanks for guidance me
Samadhan Nikam y TV
Thanks a lot.
😠😠😠🤭
Me- 0:37
My mom - kya giraya kuttey chain se jeeney maat do tum log mujhey
,😂
Nice...your...repair.....stove.
Thanku sar g...
Thank you for the video.i think my stove had the jet replaced when I had a pipeline connection.Now when I got the Log cylinder connection, the stove's sim gives greater flame, that is I get high flames all the time. Sir can you give me a solution for this. Is replacing the jet enough or should I replace the whole valve?is jet available in market?
Now with the cylinder if your sim flame and high flame has some difference, your jet change will correct it BUT if your flame is same at sim and at high then the jet is not the problem but the regulator that controls from sim to high.
Yes jets are available with few sizes in the local gas stove shop. Need to take your jet to see the type of jet. You can check the change in hole size seeing through it. Good day.
@@ayyamperumalr Thank you for the reply Sir.The flame sim is lesser than in High but not like it should be ideally.It results in excessive burning of utensils.I changed the jet but the problem is persisting.
@@cyrilcbis at 4.18 th minute of the video you can see the valve that helps to regulate the gas flow into the burner. The part as shown in 8.05 th min, If you get the inner valve part with smaller hole you can try changing.
Replacing removing the total valve is not advisable , as there are chances of leakage. Try with a lower size jet or valve else give to the service person. Good day.
good information
Sir how r u?i am vaishnavi ur student. just now seeing your 1st video.very useful sir trying it now the sir.
Fine and wish the same. Thanks. Yes remember you. Good, maintain the stove well.
Very knowledgeable sir
Is it possible to change gas pipe direction from right to left
I have changed 20 yrs before.All going o.k
Thank you. very helpful. Where can we get the spares for the stove parts usually.
in all the towns and cities there will be shops for gas stove repair and they will have this. I just enquired in the main bazaar of my town and after few inquiries i was aware that there are two shops and they also showed me the direction to reach the shop.
very help full
very useful
It will help me in my business.
Good knowledgeable video keep it up bro
very useful thanks
Sir क्या चुल्हे के left side से gas supply दे सकते हैं?
How to unscrew the 2 big nut-like screws on the 2 sides of the gas metal pipe? I have seen a gas stove cleaner who goes door to door to clean gas stove. He passes a rag soaked in kersone into the metal pipe and cleans the metal pipe.
removing those nuts need proper care with sealant. Generally we don't need to remove that even after 20 years of use unit if you find leakage.
Sir plz upload how to change side of nozzle
thanks for video
Can I remove the defective gas knob and take it for repairs while the other one(good one) remains? Can I use the gas stove that way?
Yes you can use but there is nothing to repair in the gas knob but replace when broken.
Gas knob is the plastic knob that we turn to increase or decrease the flame.
bohot beautifull ha uppp woww
I appreciate ur efforts to make this video sir ..... Actually i was nt sure about my gas stove .... By watching ur video i think it's pretty easy..... Thank you
65 pedda burner nozzel and 58 chinna burner nozzel haa bro tell me correct haa sir
very nice video sir. thanks
ayyamperumal, i have one problem. my gas knobs have no screws. So how do i remove/detach them to clean?? Please help.
if it doesn't have screws then usually it is simply plugged in, so pull it outward to remove it.
Thank you
Lpg gas leak ho raha h knob se,kya sakte h iske liye
thank you ji
Thank you. I have a one single burner rinnai which is hard to turn, stuck in fact .May be I'll have to replace the little cylinder in there.
Thanq sir little English knowledge my gas stove one burner is high flame ,red colour flame spoils my vessels black colour and sound also comes what can I do sir please tell me
Red flame, you must clean the burner by putting into washing soda and hot water. You can also try putting a pin into each hole to clean it when inside the hot water with washing soda.
I'm a gas cooker engineer, nice work how can you convincing audience to remove all of feer in a gas stove??
This video is not to convince anyone to do. Just shared what i did
My stove near the gas entry pipe side small burner .
1. In that side on off knob is very tight even in cool condition and also after assemble.
2. Normally i notice some leakage smell every morning after wake up.
3. Also while burning heavy heat produce in stove .
4. Big burner side flame is very low ..i cleaned last month still same problem
sir please upload how to reassemble all the parts.
The same way how we removed it. Watch the video how we removed, this will help you to re assemble
Txn for sharing knowledge
Thank u sir use for all
Gas burner is very tight, not able to remove, how to remove
thank you for your kindness and this help full video
Thanks
My friend noted this is to be repaired by qualified gas technician this is LPG cylinder,and to be opened by proper tools only.
Hi sir, nice topic flame when I full open that time automatically LPG flame 0ff my original condition full open it is in medium film how to get this please help me
Kesavan Mariyappan clean the burner well with washing soda. the mistake is in the air mixture. if it doesn't off when slowly raised it is not a problem
Thanks a lot sir
pls also show how to change setting in lpg stove to use with PNG piped gas.
i am sorry i don't know about that but i believe that one regulator is enough from the pipe to control
nice.
but translation language need in hindi.pls.
thank you so much
Brother Ama Hp gas office re gote Safety clean program Achhi tk video pathalo
how to remove the lpg hose connecting point
Don't try removing the LPG hose connecting reducer/adapter. because all the connections to the main long pipe needs more care. It needs sealant when screwing back and proper leakage must be tested.
Gas ka nojal Kitane me milta hai bhai
Don't try this do you understand properly tha gas stove if u will do other wise is very Danger i see fire problems many homes self service because I am tecnision
Since you are a technician you know that removing the gas controller and fitting it rightly is important and other things are not that dangerous. Anyway need to do things with caution.
Mohamed jaleel dude work on your English
@@toheedrabbani6865 His English is from Uganda 😂😂😂