Ringing Conductors Out | Identifying Which Is Which | Man About Home

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ธ.ค. 2024

ความคิดเห็น • 11

  • @micmike
    @micmike 9 หลายเดือนก่อน

    nice method, thanks

    • @manabouthome
      @manabouthome  9 หลายเดือนก่อน

      You're welcome. Thank for watching!

  • @bobblum5973
    @bobblum5973 9 หลายเดือนก่อน

    One thing to note: You're also checking for which wires do NOT show continuity. Make sure only one matches. Brand new runs should be simple, verifying existing ones have potential problems you want to be cautious of.

    • @manabouthome
      @manabouthome  9 หลายเดือนก่อน +1

      Agree. Thanks for watching.

    • @manabouthome
      @manabouthome  9 หลายเดือนก่อน

      I have to modify my agreement. In this case, I'm looking only for one wire. I know where the others came from because there's only 4 and I pulled them in through 20 feet of pipe. In a manufacturing plant, where there's been lots of previous work, you need to be more careful. But you still wouldn't check every wire. In my 40 years of experience in major manufacturing plants, I've seen cabinets with bundles of spare wires 50 thick. We never checked every wire, when all we needed to find is one. Of course, we'd follow the conduit to confirm we know its source. Thanks...

  • @spencerwyche2552
    @spencerwyche2552 9 หลายเดือนก่อน +1

    Imagine if he had marked the wires,with tape one by one,prior to pulling them😂

    • @bobblum5973
      @bobblum5973 9 หลายเดือนก่อน

      The principle applies to wiring in general, not just new runs.

    • @manabouthome
      @manabouthome  9 หลายเดือนก่อน

      That's silly. Thanks for watching.

    • @manabouthome
      @manabouthome  9 หลายเดือนก่อน +1

      @@bobblum5973 Agree. Make sure all power is OFF!

    • @manabouthome
      @manabouthome  9 หลายเดือนก่อน +1

      Imagine if you followed the crew that pulled the wires in 3 weeks ago and didn't mark them.

    • @bobblum5973
      @bobblum5973 9 หลายเดือนก่อน +1

      @@manabouthome Exactly!