excuse me sir i have an hyundai company catia tool test on surface modelling and generative modelling can you please suggest what type of models have to practice.......?
Hello, thank you for your videos. I need to add a layer with a X thickness into an American football helmet in CATIA. Do you know how I could do it ? The shape inside the helmet is oval.
Hi Arun, Basically anchor points are useful for positioning of the profile which we are sweeping with the guide curves along which we want to sweep... Mainly used where you use two guide curves while sweeping... Thanks!!
What is deviations from guide, setback, angular connection in sweep can you sir make one more video showing those that will be much helpful for me . After all nice video
Whereas, Angular correction is basically useful to smoothen the sweeping motion along the reference surface. this is essential whenever there are minor discontinuities are there at Spines, Guides where we need tangency for sweeping..If there is no tangency, we unable to create the sweep. And Deviation from guides is to smoothen the sweeping motion by deviating ot from the guide curves. Will make one video tutorial on this so that is I'll be understood properly. Thanks
While selecting new sketch positioned sketch command Why you use swap option every time? Please explain me. If anyone reading this comment please give me the answer.
look at the H (horizontal) and V (vertical) arrows and their direction. they foresee the camera layout after clicking OK and going into sketch. basicly you can have your sketch view upside down or you can look at it from behind. it also changes relative dimensions.
Hi Thanks for your great input could you please do a similar type of video on blend command it will be very great full I am eagerly waiting for it,and if you have any reference please help me ...... I am beginner Thanks
Thanks Shivanand... Thanks for watching... Pls like and subscribe my channel 😊 There is already a video available on blend command. th-cam.com/video/g3AGW6VCI18/w-d-xo.html You can watch all the videos related to surfacing... th-cam.com/play/PLLWWTt3qPISQgazrNMuBHnTsByseXXUgU.html Thanks
Gr8 sir..thanks a lot .. usually most of you tube catia video are muted..but u explained everything ✨it was easy to learn
Welcome and thanks for watching 😊
Excellent💯
Thank you so much sir 🙏 ☺ 😊 ❤
Welcome 😊
IT'S REALLY A GREAT STUFF , NICE VIDEO.
Thank you 😊
this video clearly explains
Sir u r great 🙏
Thank you very much!
That's really helpful
What is Add cutter in catia swept surface which is present in all swept type and also setback option
excuse me sir i have an hyundai company catia tool test on surface modelling and generative modelling can you please suggest what type of models have to practice.......?
Hello, thank you for your videos. I need to add a layer with a X thickness into an American football helmet in CATIA. Do you know how I could do it ? The shape inside the helmet is oval.
Good Job:)
thanks for watching
TQ sir 👍 good job sir
Thank u
good explanation instant subscribe for you
Cool thank you so much 😊
Cool thank you so much 😊
sir how can i make the design of the parabola using coordinate in catia ??
You’re amazing just get better audio&HD video. God blesss u.
what is the use of anchor points in two guide curves option?? what happens if we change the anchor points in explicit two guide curves
Hi Arun,
Basically anchor points are useful for positioning of the profile which we are sweeping with the guide curves along which we want to sweep...
Mainly used where you use two guide curves while sweeping...
Thanks!!
Dear sir, I have need to electrical wiring harness training programe
What is deviations from guide, setback, angular connection in sweep can you sir make one more video showing those that will be much helpful for me . After all nice video
Hi Arindam, Will definately make one video on requested points..
Thanks!!
Keep watching and do subscribe our channel..
Whereas,
Angular correction is basically useful to smoothen the sweeping motion along the reference surface. this is essential whenever there are minor discontinuities are there at Spines, Guides where we need tangency for sweeping..If there is no tangency, we unable to create the sweep.
And Deviation from guides is to smoothen the sweeping motion by deviating ot from the guide curves.
Will make one video tutorial on this so that is I'll be understood properly.
Thanks
@@CADTutorialsForBeginners sir have you made the video if made please give me the link here
While selecting new sketch positioned sketch command
Why you use swap option every time?
Please explain me.
If anyone reading this comment please give me the answer.
look at the H (horizontal) and V (vertical) arrows and their direction. they foresee the camera layout after clicking OK and going into sketch. basicly you can have your sketch view upside down or you can look at it from behind. it also changes relative dimensions.
Hi Thanks for your great input could you please do a similar type of video on blend command it will be very great full I am eagerly waiting for it,and if you have any reference please help me ...... I am beginner Thanks
Thanks Shivanand...
Thanks for watching...
Pls like and subscribe my channel 😊
There is already a video available on blend command.
th-cam.com/video/g3AGW6VCI18/w-d-xo.html
You can watch all the videos related to surfacing...
th-cam.com/play/PLLWWTt3qPISQgazrNMuBHnTsByseXXUgU.html
Thanks
Thank you very much let me have a check
Hi Could you please share me the link I could not find it in your channel
Thanks
Shivanand
@@kareppagol th-cam.com/video/g3AGW6VCI18/w-d-xo.html
i think this is not useful...sir u are telling only the easy things..not the difficult depth and minute options..do another video with depth..
Thank You Very Much Sir 🙏🙏