It only repeats the position you told it to go to. So you might put it in the right spot every time or the wrong spot every time. And it does nothing to control the orientation of the part. Extremely limited value and applications, considering the high cost.
Ilyen az,amikor az ember egyesül az általa megalkotott technológiával.Nagyon szeretnék egyszer ilyen géppel dolgozni...A jól kiválasztott zene a szükséges plussz!Proto termékekhez is egyedi kis darabszámmal gyártott PCB-hez is kiváló.
Hi, for component in the carousel, how do you ensure the pick-and-place probe placed exactly in the middle of the component? it seems the guided hole did not take into account the offset of the position of the component when you pick it.
I was curious about that also. Looking at the placement of the two ICs at 3:21 to 3:32 it looks like the guide pin gets you to the nominal part location but gives you some wiggle room to manually align while placing.
I'd imagine that this product level would suit those smaller businesses who cannot afford to outlay more than $150,000 on an automated pick and place machine - especially considering that that small business might already have the skilled staff on site, which makes the case for a serious investment in an automated pick and place machine even less tangible.
Well admittedly, $150,000 was an assumed figure - and it's also very difficult to find pricing for an Industrial PnP machine. All the websites want you to sign up to get prices :E
A "real" business isnt going to DIY a pick and place machine or buy a 20 year old used one. Plus the setup times on many large machines outweighs any time advantage. Hence the niche for this machine.
Joe Ambly >> Define "real business". Neither SpaceX or Tesla started out buying high end equipment right off the bat. I wouldn't consider either of them not being real businesses
Если система видит на какой угол нужно повернуть деталь и указывает местоположение, то я не понимаю почему ее не оснастили дополнительными четырьмя двигателями, а на человеке оставили только инспекцию If the system sees to what angle the part needs to be turned and indicates the location, then I do not understand why it was not equipped with additional four motors (moving + rotation), and only an inspection was left on the person
by the time you set that up you could build one by hand easy, if your gonna do volume just get the pnp, does't need to be a fancy one either, get a used one with a few perks and warranties. You could modify that setup and make is faster by using a microscope and a mouse controlling the placement wand instead of this non-sense.
At 3:37, it looks like component, "RIVX 55M" has the lower left first two pins soldered together as an accidental short ???? Hope I'm wrong... Honestly I would o with rectangular solder needle dispensers, as they might avoid such tragedies...
If the board is still being placed, then the solder paste has not yet been melted. When it is, the surface tension will easily pull the solder onto the pad. This is pretty standard in SMD soldering, and is part of the reason for the solder mask layer.
I liked the tutorial I am smt operator here in Tijuana Mexico can upload videos of commands for universal machine automatic insertion in Spanish. I am interested in greetings from Mexico.
you can get a quote at the fritsch website, but make sure you're sitting down before you open theyr email... it's probably around 15k€, soo, better go buy a simple but fully automated SMT placer for 5k€ in asia, do it completely by hand, or actually buy something else that is a bit more reasonably priced...
I love the dynamic guide hole that makes sure your putting the component in the exact correct spot!
It only repeats the position you told it to go to. So you might put it in the right spot every time or the wrong spot every time. And it does nothing to control the orientation of the part. Extremely limited value and applications, considering the high cost.
man this is the coolest toy i seen in a long time :O
great job!!
Muito interessante. Nunca tinha visto placas construídas feita a mão.
Sabes oq e' aqueles pontos vermelhos entre a pasta de solda?
Great operation!
Ilyen az,amikor az ember egyesül az általa megalkotott technológiával.Nagyon szeretnék egyszer ilyen géppel dolgozni...A jól kiválasztott zene a szükséges plussz!Proto termékekhez is egyedi kis darabszámmal gyártott PCB-hez is kiváló.
Amazing. So beautiful!
NICELY DEMONSTRATED
wow sir ur intro impressed me :D
With that intro - I thought I was about to start playing Ratchet and Clank on ps2
очень хорошая машина для создания прототипов или мелких партий готовых устройств
Excellent video @Paul Cooper, do you construct manipulators too?
Did you notice 3:35 wrong direction of IC mounting, it catched my eye.. 100% secure, yes)
good catch, you were paying attention. (like someone placing smd should have been doing) ;-)
I did noticed the same. This machine needs to improve and solve this problem.
Or - not make a 100% claim gaurantee that no error will happen in the first 5 seconds of video.
fseeletronicos © this is not a problem with the machine. The operator controls the position of the components as was demonstrated moments before the placement of the IC in question.
Erich Stein the video did not make any claims that no errors would happen. It stated 100% SECURE PLACEMENT. Nothing more.
Bem legal ver essa montagem de componente smd
c'est génial 👍
Great, and we have SMT whole line equipments, are you interented in it?
Thankyou excelent video
Today SMT is is the technology in electronics and if quantities are not very high, this semi-automatic system is promising !
Thank you!
To integrate a general purpose common component placement arm set will be a good investment.
great solution for rework and prototype of high value products in high power electronics or medical or military or aerospace sectors.
Very cool , I thought I was useless when components stuck to to the tip of my soldering iron .
Fantastic tool !
What is the mark and viscosity of solder paste that you are using ?
Any can be used..
Nice video, thanks :), where did you get it from ?
When you wanna build boards like grandpa used to but everything is smt
My fear of SMT components increases.
Beautiful
Content starts at 0:23.
😂😂
Amazing please must see this will help you and me both...
@
Thanks...
Yes human.. Do my bidding! Assemble my brethren!
Excelent!!!
I would have loved to hear what you had to say. Since I can't see well enough to read it.
WAW OK GOOD YES
THANKE YOU THANKS
Awesome!
Excellent.
Hi, for component in the carousel, how do you ensure the pick-and-place probe placed exactly in the middle of the component? it seems the guided hole did not take into account the offset of the position of the component when you pick it.
I was curious about that also. Looking at the placement of the two ICs at 3:21 to 3:32 it looks like the guide pin gets you to the nominal part location but gives you some wiggle room to manually align while placing.
Для предсерийной партии вполне хороший инструмент.
Правда стоить будет как деталь от самолета. :-))
So, do they also have a version for us are left-handed?
Im also left-handed, but its actually pretty convenient to operate with right hand
@@IvanFedulov Do you have one? If yes what are the top 3 disadvantages you would count? Many thanks in advance
How’s the accuracy
Fantastic
Nice man
I think, this one is also not cheap. Finaly a automated one is much more efficient. Before i use this i can also use just by hand.
Hi respected sir video is very intresting thsnks a lot. Seeing this i m very happy
Good job
Intro video verywell. Where is link? Help me please!
I like this machine
Нормальный полуавтомат... вот бы раза в 3 подешевле и можно использовать на небольших производствах.
почему его все называют полуавтомат если все вручную ?
Потому и полуавтомат , а не автомат что без человека не работает...))
Nice
maravilla
It's like an engineers wet dream
nice!
Why though? What advantages does this have over a automated one?
I'd imagine that this product level would suit those smaller businesses who cannot afford to outlay more than $150,000 on an automated pick and place machine - especially considering that that small business might already have the skilled staff on site, which makes the case for a serious investment in an automated pick and place machine even less tangible.
$150,000? Serious? You can get them for under 10 thousand or build one for a fraction of the cost.
Well admittedly, $150,000 was an assumed figure - and it's also very difficult to find pricing for an Industrial PnP machine. All the websites want you to sign up to get prices :E
A "real" business isnt going to DIY a pick and place machine or buy a 20 year old used one. Plus the setup times on many large machines outweighs any time advantage. Hence the niche for this machine.
Joe Ambly >> Define "real business". Neither SpaceX or Tesla started out buying high end equipment right off the bat. I wouldn't consider either of them not being real businesses
I like this
grate
hello where can i buy this product ?
very nice
wow nice
Если система видит на какой угол нужно повернуть деталь и указывает местоположение, то я не понимаю почему ее не оснастили дополнительными четырьмя двигателями, а на человеке оставили только инспекцию
If the system sees to what angle the part needs to be turned and indicates the location, then I do not understand why it was not equipped with additional four motors (moving + rotation), and only an inspection was left on the person
Это лучшая система ручного монтажа.
کاش میشد تو ایران هم به این وسایل دسترسی داشت
3:38 IC is wrong orientation.. Potential flaw?
nice
I want one!
Super
Главное не чихнуть.
Cnc or manual
Sir Any place to work there. I like to learn and do works on PCB.
ssoo, what do i exactly gain by using this (not so very cheap) machine ?
Speed and accuracy.
I need a full automated one.
we have a full automated
if you need ,Please contact me: ming@smthelp.com
juki 2080l and fx-2,and samsung neo ,cp45
Hanzhen harmonic drive gear , over 30 years experience , strain wave reducer, robot joint ,
what is the price of this machine
by the time you set that up you could build one by hand easy, if your gonna do volume just get the pnp, does't need to be a fancy one either, get a used one with a few perks and warranties. You could modify that setup and make is faster by using a microscope and a mouse controlling the placement wand instead of this non-sense.
you know that tweezers and a big table cost less than that right?
you know a donkey costs less than a helicopter right?
How to solder them then palaced
woooow 😮😮😮😮😮
At 3:37, it looks like component, "RIVX 55M" has the lower left first two pins soldered together as an accidental short ???? Hope I'm wrong... Honestly I would o with rectangular solder needle dispensers, as they might avoid such tragedies...
If the board is still being placed, then the solder paste has not yet been melted. When it is, the surface tension will easily pull the solder onto the pad. This is pretty standard in SMD soldering, and is part of the reason for the solder mask layer.
Bello
and what music track is playing?
Kf016901 universal mind...in credits
goods
What is the cost of this machine
intro dữ thiệt
It's price and availability
Wat is the price sir plz tell me i want 2 buy this 1
Why?
I think this isnt meant for mass production,this is for making some prototype sample pcb
I liked the tutorial I am smt operator here in Tijuana Mexico can upload videos of commands for universal machine automatic insertion in Spanish. I am interested in greetings from Mexico.
Greetings from Kiev!
What is the rate
How much ?
Sar is machine ko padh chij karna ho to kaise parichit karenge
Wow that probably takes forever.
Looks like its more complicated than doing full automation
How much it costs approximately ?
And where I can order it online
you can get a quote at the fritsch website, but make sure you're sitting down before you open theyr email... it's probably around 15k€, soo, better go buy a simple but fully automated SMT placer for 5k€ in asia, do it completely by hand, or actually buy something else that is a bit more reasonably priced...
كم سعرها. اريد عدد 5 منها
Not to be confused with Full Semi Auto.
Semi machine price sir please replay
Ye masheen kitne ki he
Это чё за самотык?
i think we can get rid of the meat bag at this point. its slowing down the operation
Good work