How can you make a video where one of the central topics is noise, and play music all the time? I want to hear the machine noise - an its eventual improvement -, not music! The idea of the video is excellent. Please, don't destroy it with music!
Hi, need help on my r1 pro. Just bought it and used it for a week then stopped due to some reasons. When I used it again, it is now making noise. I already put a lubricant oil. Its been raining and stucked in our bedroom. Could it possibly be because of the cold temp or just of not using it suddenly?
hi there, very helpful video! wanted to ask you though, since I had more than a year to use it, I put some silicone oil under the belt and always following the instructions of xiaomi, however when I start walking on it , the belt does not move at all and only the under the belt floor moves; I have to move at the middle of the walking pad in order for the belt to start moving, which is not comfortable at all! Any ides why this happens? thank you in advance!
I have Kingsmith R1 PRO I have just opened it up and tried it. The only problem is that there is a small bubble under the belt that feels a little bumpy and makes a popping sound. Is that normal?
Hey, mine can’t adjust the left feet. Turning it doesn’t work for some reason. All others can be turned. Is this normal? In your video it worked on the left one
Nope, that is a factory defect. There should be 6 adjustable Foot/Grip Pads and 2 are fixed in the bottom section of the treadmill. That is a common issue with these WalkingPads.
Hello, thanks for your video. My problem is the following: I got the message "fold" on the screen. Doesn't matter what I do, the message remain there and I can't use the walkingpad. Thanks in advance for your feedback!
Hi, i got same issue like you that my belt keep running to left. No matter how i adjust it will still move to left until the belt slip out and also the thread. And the nut at the left is already tighten when i keep turn to clockwise. Do i need to adjust the nut to anti clockwise first before i do this setting? Would appreciate your answer.
My belt keeps going to the left and I've followed this video and now the bolt on the left is tight and it's still going to the left. Any other suggestions?
Lift the bottom half up & let it hang by the belt then adjust it while suspended in the air you'll be able to easily level the belt & solve the one sided & slipping belt problem for good.
Once folded out it wont completely lock in place and once walking or running on it the back end starts bouncing like crazy. Its not a feet. adjustment. Anyone know what to do?
Hi, all are 8-foot pads adjustable? or are just the ones on the foldable side? I got the treadmill and had already returned it because one of the pads in the folding side was stuck and not rotating for adjustment, now I wonder if all 8 feet have to be adjustable?
The first two near the handle only rotate but don't adjust. I know this bcos this is my second R1 treadmill the first had a similar problem to yours of feet tht are stuck & i returned it.
How about if the belt doesn’t even run.. I can hear the motor is running but not the belt.. I tried everything, make the belt in the middle, tighten it, loosen it.. but it doesnt work at all
i have kingsmith x21 , and everything was fine. Today i found out that the top button/ controller of my walking pad , display button changed its language to chinese. I want it back to english! Please help!
Firstly my R1pro was all ok. Then suddenly when i turn on the machine, the display showed a msg 'TEST' and after a couple of seconds the machine beeped 9 times and there was an error msg showing 'L' and it stopped working. Help!!!
Did you figure it out? I suspect that the belt of my R2 Pro is too tight because I can't fold it up easily from the ground because of a hard resistance.
My walking pad suddenly stop working, after being used around 5 mins. When I turn off and on again, the belt can start running again. But after 5 mins, it will stop again. Do you know what's causing itu?
@@davidhjgayministry I contacted the service center. When with them, I cannot reproduce the symptom, lol. Finally they just replace the motherboard. I also notice that my house electricity voltage also very bad. So I fixed that as well. Now it's working normal. Either one of them was fixing it
@@saviourcat how did they replace the motherboard? Did you take the machine to a technician? Mine has the same problem as yours. How can I fix it, please?
Very poor quality, used for a couple months then it became unusable. The deck broke at the bending and replacing it would cost me more than I paid for the whole thing. They said warranty would cover the component but I've to cover for shipping from China and the cost of it was ridiculously expensive. Terrible experience, will post a video shortly. DON'T BUY IT!!!
Hey have you posted the video? I ordered it in India and I am reconsidering. And yes if it becomes unusable after a months use, then it's really concerning.
2:27 Turn counter clockwise. Turns clockwise 😂 Why o why is it SO difficult to just make a decent user manual? I am going to return this piece of garbage. Been at it for days now. I just don't want to have anything to do with this brand anymore 🤢
if there wasn't this song in the background I'd have been able to tell what kind of noise if any yours is making
This video is how an R1 Pro should sound like: th-cam.com/video/UgNaYceGfAY/w-d-xo.html
How can you make a video where one of the central topics is noise, and play music all the time? I want to hear the machine noise - an its eventual improvement -, not music!
The idea of the video is excellent. Please, don't destroy it with music!
You are such a sweet saviour to my walking pad turmoil!!
Hi, need help on my r1 pro. Just bought it and used it for a week then stopped due to some reasons. When I used it again, it is now making noise. I already put a lubricant oil. Its been raining and stucked in our bedroom. Could it possibly be because of the cold temp or just of not using it suddenly?
Thanks , after watching this stuff , i fixed my walkingpad x21
Have you ever experienced a clicking sound in the middle part? I've tried adjusting the legs several times and the noise is still there.
I think it's the foil exactly in the place where it's folded which is cracking when your foot goes over it.
is it ok to calibrate while the belt is running? sometimes instructions in the manual are a bit vague but i see you doing it seems easy
hi there, very helpful video! wanted to ask you though, since I had more than a year to use it, I put some silicone oil under the belt and always following the instructions of xiaomi, however when I start walking on it , the belt does not move at all and only the under the belt floor moves; I have to move at the middle of the walking pad in order for the belt to start moving, which is not comfortable at all! Any ides why this happens? thank you in advance!
Hello, I need to replace the wheel on my r1 pro and cant find any information on how to do it. Do I need to disassemble the treadmill to do it?
My new R2 treadmill is not centering and stops running after 3 seconds. Help please 🤨
Help !! My walking pad dosent fold I pull the lever but dosent fold 😢😢😢😢😢 why ?
I have Kingsmith R1 PRO I have just opened it up and tried it. The only problem is that there is a small bubble under the belt that feels a little bumpy and makes a popping sound. Is that normal?
My Kingsmith X25 will only fold the first half. When I pull the latch handle to make the second part fold up, the latch won’t unlock it
Hey, mine can’t adjust the left feet. Turning it doesn’t work for some reason. All others can be turned. Is this normal? In your video it worked on the left one
Nope, that is a factory defect. There should be 6 adjustable Foot/Grip Pads and 2 are fixed in the bottom section of the treadmill. That is a common issue with these WalkingPads.
How bout if the treadmil turns off by itself, it happens while i'm using this, after that it can't turned on anymore, can u help me please
Hello, thanks for your video. My problem is the following: I got the message "fold" on the screen. Doesn't matter what I do, the message remain there and I can't use the walkingpad. Thanks in advance for your feedback!
Hi, i got same issue like you that my belt keep running to left. No matter how i adjust it will still move to left until the belt slip out and also the thread. And the nut at the left is already tighten when i keep turn to clockwise. Do i need to adjust the nut to anti clockwise first before i do this setting? Would appreciate your answer.
Mine too!! The same problem
What should I do?
Thanks man! Just what I need. Merry Christmas!
My kingsmith walkingpad a1 pro suddenly turn off😭😭😭
Hi, how to fix error code?
My R1 treadmill shows “Fold” in the screen. Do you know how to resolve this?
Is probably overthighten. Loose is a bit
Which diameter allen screw did you use to fix the belt? I've lost it
5
and how about switching belt ?
My belt keeps going to the left and I've followed this video and now the bolt on the left is tight and it's still going to the left. Any other suggestions?
Did you find any sokution
Lift the bottom half up & let it hang by the belt then adjust it while suspended in the air you'll be able to easily level the belt & solve the one sided & slipping belt problem for good.
Once folded out it wont completely lock in place and once walking or running on it the back end starts bouncing like crazy. Its not a feet. adjustment. Anyone know what to do?
Hi, all are 8-foot pads adjustable? or are just the ones on the foldable side? I got the treadmill and had already returned it because one of the pads in the folding side was stuck and not rotating for adjustment, now I wonder if all 8 feet have to be adjustable?
The first two near the handle only rotate but don't adjust. I know this bcos this is my second R1 treadmill the first had a similar problem to yours of feet tht are stuck & i returned it.
There should be 6 adjustable and 2 fixed Foot/Grip Pads in the bottom section of the treadmill.
How about if the belt doesn’t even run.. I can hear the motor is running but not the belt.. I tried everything, make the belt in the middle, tighten it, loosen it.. but it doesnt work at all
How did you loosen it ?
i have kingsmith x21 , and everything was fine.
Today i found out that the top button/ controller of my walking pad , display button changed its language to chinese. I want it back to english! Please help!
Firstly my R1pro was all ok. Then suddenly when i turn on the machine, the display showed a msg 'TEST' and after a couple of seconds the machine beeped 9 times and there was an error msg showing 'L' and it stopped working. Help!!!
My pad does not turn on. No power at all. I just opened it from the box. What should I do? Thanks
Hey did you figure it out because i am getting the same problem
My belt is sliding and feel I will take off. Any ideas?
Maybe lubricating it will help. Some background on this issue on most residential grade treadmills: th-cam.com/video/M8c1Jz4nqKQ/w-d-xo.html
You need to learn what counter clockwise mean
Mine won't work. E05 Error
How to loosen the belt if you overtight it?
Did you figure it out? I suspect that the belt of my R2 Pro is too tight because I can't fold it up easily from the ground because of a hard resistance.
Hi! I receive e15 error with my R1 model. Do you know what it means and how I can solve this problem?
Hey did you figure it out? Because I have an error 15 also
@@jujujulie5549 nope 😢 The service center said that the engine needs to be changed. It cost like 70% of a new treadmill
@@pissankawas it within the warranty period or after the warranty?
@@mohammadsohail5684 after
My walking pad suddenly stop working, after being used around 5 mins. When I turn off and on again, the belt can start running again. But after 5 mins, it will stop again. Do you know what's causing itu?
did you ever get an answer my is doing the same.
@@davidhjgayministry I contacted the service center. When with them, I cannot reproduce the symptom, lol.
Finally they just replace the motherboard.
I also notice that my house electricity voltage also very bad. So I fixed that as well.
Now it's working normal. Either one of them was fixing it
@@saviourcat I have no idea what this is about. I certainly never replied to you.
@@saviourcat how did they replace the motherboard? Did you take the machine to a technician? Mine has the same problem as yours. How can I fix it, please?
@@francescaspuzzles6090 they(the technicians) replaced the motherboard on the spot. They bring a spare motherboard during their visit
I still can’t get centered 😫
What kind of Allen key?
#5 Allen key
My treadmill is too noise
Pad makes a speaking noise when I stand on it
Try to adjust the feet
Very poor quality, used for a couple months then it became unusable. The deck broke at the bending and replacing it would cost me more than I paid for the whole thing. They said warranty would cover the component but I've to cover for shipping from China and the cost of it was ridiculously expensive. Terrible experience, will post a video shortly. DON'T BUY IT!!!
Hey have you posted the video? I ordered it in India and I am reconsidering. And yes if it becomes unusable after a months use, then it's really concerning.
2:27 Turn counter clockwise. Turns clockwise 😂 Why o why is it SO difficult to just make a decent user manual? I am going to return this piece of garbage. Been at it for days now. I just don't want to have anything to do with this brand anymore 🤢
did you change brands mate? which is a good brands?
Remote problem
Download the App on iOS or Android (KS Fit)