Did he use inner tube back then in this videos? if yes, was it a TPU or a normal butyl inner tube? because if its a butyl and it weigh only 7,3kg. then ill think about this bike for my next build, since its aero and then if i can get it to 6,9kg, then its crazy best. around 150 to 200 grams saved from inner tube, and probably around 100-120grams from the saddle, since the saddle he hass looks quite huge. maybe even 6,7kg if i use all around wheels at 45mm.
Hi Jack, Im 180cm and an inseam of 84cm. Should I go for a large or would you opt for a medium if you were my size? We are almost the same size and both you and cam both went medium but my local bike shop in Malaysia is telling me to get the Large
@@RealMeatyBalls imo, you should get a medium. If you stick in between 2 sizes, i usually choose a smaller size. You can always make a small bike bigger (adjust the seattube to make it higher, longer stem, longer reach handlebars), but you can't make a large frame smaller. Trust me. You do not what a too large frame.
translator I always said all frames made with a carriage pressfit this stuff! so that people would buy, and I knew that the thread would be returned again, I am an engineer by education, and I argued that the bearings should be inside the frame, and should be on the thread, even I drew the frame 7 years ago like a T 47 carriage and, lo and behold, marketers have come to this. carriages with such a thread and the width of the carriage make the frame better and stiffer, since the lower part is wider. so far, only a few brands are making such technology. Seka well done. the review is cool, my height is 178. leg length is 81 without shoes) the frame size was ordered by M. but I am upset that the weight of the frame does not match what they say even close. but on the technical side, everything below 1 kilogram is fragile and cannot be rigid, alas. this one is so.
This is the best review explanation so far. I'm sold. I expected China will produce some good product , we as a consumer have to careful choose and by your channel producing these kind of content it help us as consumer. Kudos
Nice video and bike with clear explanation. Need to create more brand awareness for it to sell well. Most of us generally go for the popular brands in the market. For potential customers who are able to try this bike is a plus and hope it creates that feel that not just the European or American but we have an additional choice from really well made products from China and asia as well.
I'm quite annoyed that the vortex wheelset cost 3.55k. Not really sure they mail that. I just build a Chris King + Sapim spokes + China 60mm light rims for 1.5k. What makes the Vortex special besides the carbon spokes?
Totaly didfernt,. I have vortex N6. The carbon is T800. Usually the carbon's best material is T700. I have CK+50mm、 N6 vortex.Vortex is a cheaper version of Lightweight.
well gotta disagree with the bb issue....some brands went back to t47 threaded cus lesser fit tolerance needed. While some brands are doing fine with pressfit bbs...
Another beautiful bike and another upgrade on your video (This time round we can hear your questions). Well done 👏. Wow, 15k for a Chinese frame and wheel. That's eye watering. But must admit, those are very light wheels. @Jack, I am looking for someone to restore my 1986 Vitus road bike, will you be able to help? 😉
I want to build a bike, undecided between this bike and the WinSpace. Funny thing is nobody from their factory/web pages answer questions I mean difficult to do business like that, by the way I live in Florida USA.. I may want to help them expand their business here but HOW ? 😢😮
@@OompaLoompaCycling Cycling 100, I’m really undecided between WinSpace and SEKA. I did have contact with WinSpace they will have frames but in February. As far as SEKA ? nobody answers. I just subscribed to your channel. Thanks for the vids.
I prefer lightweight race bikes and its terrible to not be able to hide in the middle and pretend to be tired. No wonder all the newcomers are going for aero bikes.
🚴♂ ❤❤🎆Hello, Warm wishes on New Year to all of our wonderful and very special friend. ❤ 🎉May you have a meaningful and successful year 2022 that brings you many joys and great big smiles.
![“อาร์ต พศุตม์” เกือบเอี่ยวทุกคดีดัง เอ๊ะไว้ก่อน ไม่มีอะไรได้มาง่ายๆ | แฉ 16 ต.ค. 67 [2/3] | GMM25](http://i.ytimg.com/vi/0Gx-0-kUBv8/mqdefault.jpg)
Unboxing of this frame: th-cam.com/video/IxF2-qmRaqs/w-d-xo.html&ab_channel=OompaLoompaCycling
Cam Nicholls also confirms the good build of a SEKA. He got someone to ultrasound it.
Apparently based on his video, winspace has better carbon layup
@@marcustan5868 yes but it is no slouch. It is thin though and not recommended for anyone over 100kg.
Great color and finish.
Finally a dual mic setup! Makes the video so much more enjoyable!
Seriously considering this frame. Looks like a beauty!
Curved tip of the saddle is for aero/aggressive position. It lessens the pressure on the private parts. It mimics a downwards tilted saddle.
Did he use inner tube back then in this videos? if yes, was it a TPU or a normal butyl inner tube? because if its a butyl and it weigh only 7,3kg. then ill think about this bike for my next build, since its aero and then if i can get it to 6,9kg, then its crazy best. around 150 to 200 grams saved from inner tube, and probably around 100-120grams from the saddle, since the saddle he hass looks quite huge. maybe even 6,7kg if i use all around wheels at 45mm.
Nice bike, it is on my wishlist. I have the SEKA AFIELD, runs since 10k flawless.
Jack speaks eloquently and articulately 👍🏻
the curve saddle is commonly used in MTB. on and off seat while paddling is easier. some riders sit on the curved tip when climbing difficult terrain.
Thank you for the new information!
Hi Jack, Im 180cm and an inseam of 84cm. Should I go for a large or would you opt for a medium if you were my size? We are almost the same size and both you and cam both went medium but my local bike shop in Malaysia is telling me to get the Large
Did I reply to u?
@@RealMeatyBalls imo, you should get a medium. If you stick in between 2 sizes, i usually choose a smaller size. You can always make a small bike bigger (adjust the seattube to make it higher, longer stem, longer reach handlebars), but you can't make a large frame smaller. Trust me. You do not what a too large frame.
@@VanDungLe2510 thanks mate. i will get a sizing, if thyeres any doubt, i'll go smaller
translator I always said all frames made with a carriage pressfit this stuff! so that people would buy, and I knew that the thread would be returned again, I am an engineer by education, and I argued that the bearings should be inside the frame, and should be on the thread, even I drew the frame 7 years ago like a T 47 carriage and, lo and behold, marketers have come to this. carriages with such a thread and the width of the carriage make the frame better and stiffer, since the lower part is wider. so far, only a few brands are making such technology. Seka well done. the review is cool, my height is 178. leg length is 81 without shoes) the frame size was ordered by M. but I am upset that the weight of the frame does not match what they say even close. but on the technical side, everything below 1 kilogram is fragile and cannot be rigid, alas. this one is so.
This is the best review explanation so far. I'm sold. I expected China will produce some good product , we as a consumer have to careful choose and by your channel producing these kind of content it help us as consumer. Kudos
may i know what is the widest tyres this frame can accomodate?
The SEKA font and name looks like it has been in the industry for a long time, thats their forte
Nice video and bike with clear explanation. Need to create more brand awareness for it to sell well. Most of us generally go for the popular brands in the market. For potential customers who are able to try this bike is a plus and hope it creates that feel that not just the European or American but we have an additional choice from really well made products from China and asia as well.
I would ride that bike with pride, it is a supreme machine...
Seat post dropped issues ?
I'm quite annoyed that the vortex wheelset cost 3.55k. Not really sure they mail that. I just build a Chris King + Sapim spokes + China 60mm light rims for 1.5k. What makes the Vortex special besides the carbon spokes?
probably their hubs and the overall construct of the wheel?
Well… Please watch the Vortex unboxing series for your answers Manx Missile.
Totaly didfernt,. I have vortex N6. The carbon is T800. Usually the carbon's best material is T700. I have CK+50mm、 N6 vortex.Vortex is a cheaper version of Lightweight.
what model of vortex wheels is this in the video?
Great interview, great guest. Was eagerly waiting for this after watching your unboxing video.
The owner looks like a celebrity
celebrity made from oompa loompa cycling
i am 174cm what size should i be riding for the seka exceed?
great video, thanks for that!
Whats the front light called? Where can I buy it ? Cheers ;-)
Sorry I’ve no idea. Wasn’t provided with the model
infini olly i-210P
how can I buy one?
well gotta disagree with the bb issue....some brands went back to t47 threaded cus lesser fit tolerance needed. While some brands are doing fine with pressfit bbs...
15k is not cheap...it's almost the same price as the top end of Canyon Aeroad CFR.
Is the Vortex wheel under Seka brand ? Like Hyper wheel to Winspace.
I don’t think so (I could be wrong). I did an unboxing for the Vortex wheels which will be coming soon. Maybe u can get more info in that interview.
No, they are two separate renown brands in China and are now making waves worldwide.
Looks sick 😃👌
Is anyone aware of the tire clearence on the frame?
can i buy this frame, im from indonesia
I think you are very good - great to see your face though
Another beautiful bike and another upgrade on your video (This time round we can hear your questions). Well done 👏.
Wow, 15k for a Chinese frame and wheel. That's eye watering. But must admit, those are very light wheels.
@Jack, I am looking for someone to restore my 1986 Vitus road bike, will you be able to help? 😉
U can send him a message on Instagram!
@@OompaLoompaCycling Thanks again.
I want to build a bike, undecided between this bike and the WinSpace. Funny thing is nobody from their factory/web pages answer questions I mean difficult to do business like that, by the way I live in Florida USA.. I may want to help them expand their business here but HOW ? 😢😮
Which website? SEKA's website or cycling 100?
@@OompaLoompaCycling Cycling 100, I’m really undecided between WinSpace and SEKA. I did have contact with WinSpace they will have frames but in February. As far as SEKA ? nobody answers. I just subscribed to your channel. Thanks for the vids.
@@Jcauto-t4r that sucks! hope you are able to get your frame and thanks for subscribing :)
Did you end up getting either?
@@lethargic_cow hi there, no .. I ended buying a Canyon aero road and could not be happier. I have a short clip here in TH-cam
What mount is that for the front d light?
it comes with the frameset. u can check out the unboxing video to see the individual parts.
Do you refer to the attachment below the computer mount?
@@jackgoh489 yup
That adapter is by JRC Components. CNC made.
I would like try one out before I place an order
I bet u Heven tried Shit
At least we won’t get dropped in a bunch ride becos there’s no more bunch ride in sg 😭
I prefer lightweight race bikes and its terrible to not be able to hide in the middle and pretend to be tired.
No wonder all the newcomers are going for aero bikes.
I have the exact same saddle
It’s basically a Factor Ostro at half the price. Would definitely buy this if I have the money 😂
Keyword: IF
Wait for episode 99!
@@OompaLoompaCycling HYPED! 🔥
14-15K usd ?
SGD
@@OompaLoompaCycling that's like 10k euros, no?
A bit to expensive for it
subtitle here🤔
Knocking off a mold and knocking off a carbon fiber frame is not the same thing.
Definitely a Factor Ostro knock off hahahaha
the rider can go small
No way iln hell i would spend a 10k+ chinese brand bike. 🤣
But you would if its from a western brand that buys their carbon parts from china and resold to you? ;)
Care to elaborate?
What the heck is on this fool's face?
Another lightweight aero bike.
Please stop doing videos on these kind of "do it all" bikes.
My wallet can't take it.
It’s never enough
@@OompaLoompaCycling
I will resist. 😡😡😡
Haven’t upgraded my bike for 4years alr. Stay strong.
🚴♂ ❤❤🎆Hello, Warm wishes on New Year to all of our wonderful and very special friend. ❤
🎉May you have a meaningful and successful year 2022 that brings you many joys and great big smiles.