¨i had this little grease fitting which i didn't know i had¨ Im sure there are lots of other grease fitting which are long forgotten on that tractor !!! I have a similar Case tractor
My ‘69 isn’t locking up but the right side axle began puking out hydraulic fluid by the gallon. I’m guessing the seal is in roughly the same condition as yours? Though after seeing you use your torch on that I ordered a 5’ x 3” brass rod and turned a drift pin custom for removing this seal and bearing.
Hey there thanks for the video man will help me a lot because I just bought a 580B. I was wondering what tranny oil you use if it’s gear oil or what and my hydraulic tank is milky I know I got to flush it out but I was wondering if you done it to yours and ?
Something's not right there, those bearing cones and seals are supposed pressed onto each shaft before installing into the housing. ~ Never hammer against a new bearing, it will shorten the life of it.
You should always disassemble the machine first before you buy the parts. For example, Dave didn't need that $500 shaft, which I assume he was able to take back to the store. If you search online for "exploded view" or "parts list" using the model number of your tractor, you should be able to find a list of relevant part numbers for your machine.
Thanks for the lesson. I've got to do the same on my '73. Reading the book is one thing but watching someone do it is better for me.
Thank you for the lesson, mine has just started locking on the left side. You made it look easy!!
your like the "tiger king" of 4x4'ing haha! great video sir!
Nice to see you back dave
¨i had this little grease fitting which i didn't know i had¨ Im sure there are lots of other grease fitting which are long forgotten on that tractor !!! I have a similar Case tractor
My ‘69 isn’t locking up but the right side axle began puking out hydraulic fluid by the gallon. I’m guessing the seal is in roughly the same condition as yours? Though after seeing you use your torch on that I ordered a 5’ x 3” brass rod and turned a drift pin custom for removing this seal and bearing.
good example of what not to do tonight remove races and install bearings
Very nice video. You have same body like Joey Silvera!
Wondering where he found the bearing numbers before starting this project? My 63 ish just revealed vertical play
great video, and you got.Kid Rock to help you thats awesome. lol.
Hey there thanks for the video man will help me a lot because I just bought a 580B. I was wondering what tranny oil you use if it’s gear oil or what and my hydraulic tank is milky I know I got to flush it out but I was wondering if you done it to yours and ?
To get a race out of a blind hole this don't sound right but take your welder and weld a short bead on race it will draw it up it will fall out.
Yessir. Done this many times on terrex and advance trucks
Hum, didnt show changing the side gear. Or he calls it the final gear
Something's not right there, those bearing cones and seals are supposed pressed onto each shaft before installing into the housing. ~ Never hammer against a new bearing, it will shorten the life of it.
Well, actually, what caused his channel to be shut down
What happened to David's new channel? (DavidsFarmLives)
What? - no inner race replacement?
umm u need a blind hole bearing puller, harbor freight has them, cheap, u can make one out of angle iron
I also need to do brakes and wheel bearings on my 580 b do you have part numbers for those parts? thanks
You should always disassemble the machine first before you buy the parts. For example, Dave didn't need that $500 shaft, which I assume he was able to take back to the store.
If you search online for "exploded view" or "parts list" using the model number of your tractor, you should be able to find a list of relevant part numbers for your machine.
does dave still make videos? what is it called now?
lol at 2:51 "Damn, that's stupid."
If it has bad teeth take it to the dentist LOL
Good Job Thank you
I can't see description
this guy was in jail for a while
I think he was supposed to be out a couple of months ago but I don't see any new videos
70carlton
What was he in jail for?
@@gregorymalchuk272 child porn charges
I wonder if his helper traded sex for the chance to be a movie star?
Is that even a question, duhhh
+max jones looks like one from here duhhhhh