repairing karcher pressure washer part2 of 3

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ธ.ค. 2024

ความคิดเห็น • 19

  • @Sveaisland
    @Sveaisland 2 ปีที่แล้ว +2

    Brilliant video Just saved me 400 euros on going out and buying a new one .I had a problem with the switch been out of place .Works perfect .Thank you

  • @andym.6141
    @andym.6141 7 หลายเดือนก่อน

    Guys, Thanks so much for explaining how to put that switch back together. Mine kinda pinged when I took it apart and I couldn’t figure out how it was meant to go back together, it seemed all very counter intuitive to me. My K5.85M is now back up and running after fitting a new capacitor. 👍👍👏

  • @danny_mills
    @danny_mills ปีที่แล้ว

    Amazing! Simply amazing, you guys are absolutely #1...
    I have had a problem with my K6.85 and watched all the videos on TH-cam.
    Your video is the only one that solved my problem, like you said, nobody else shows you what to do, properly...
    Thank you so much, your banter was also very entertaining.

  • @DawnohopeBridge
    @DawnohopeBridge ปีที่แล้ว

    thank you to you two gentleman, best video of a repair, I have ever seen,
    this was tricky especially refitting the switch, you did a great job.. 10/10

  • @stefanjohansson2605
    @stefanjohansson2605 2 ปีที่แล้ว

    Thank you for this video, I had the same problem to put the switch back in place. My solution was a thin wire around the tap that fits into the bearing. Then I just held the wire tight upwards and reassembled the switch without any problem

    • @LarsaGasGas
      @LarsaGasGas 3 หลายเดือนก่อน

      My power switch did not work. But I was unable to understand how to mount the spring. But your video help me to put back the power switch correct. And now it wors perfect. Many thanks. Larsa

  • @slemaneyakamlondon886
    @slemaneyakamlondon886 3 ปีที่แล้ว

    Thanks you so much for vdo😘😘😘😘

  • @moonrich3492
    @moonrich3492 4 ปีที่แล้ว

    Congratulations on being the only repairmen to actually show HOW to access the unloader valve. It was the unloader valve that you tightened, right?

  • @siefertfelix8343
    @siefertfelix8343 3 ปีที่แล้ว

    Thanks a lot!!! I though I never fix it, Bit I got Thank you!!!

  • @georgepatron8337
    @georgepatron8337 3 ปีที่แล้ว

    Hi Wayne, great video. There is one part that has me confused though. At 5:30 you mention the rod is tightened to the piston using a #7. But that rod is just part of a spring that pulls out. If you don’t mind, what do you mean you tightened it? Thanks

  • @JosesGarage101
    @JosesGarage101 9 หลายเดือนก่อน

    My power button will no stay in position when I follow your step by step. I don’t get it why….

  • @chopone2
    @chopone2  4 ปีที่แล้ว

    Yes and although it was a long video sometimes it helps to see everthing if you are a novice repair person.

  • @piotrpakula3089
    @piotrpakula3089 ปีที่แล้ว

    Nożem to konserwe otwórz 😉

  • @muhammadghirid5007
    @muhammadghirid5007 ปีที่แล้ว

    Dimana saya bisa membeli switch on/off yg warna merah itu.

  • @الاستاذولدسعيد
    @الاستاذولدسعيد ปีที่แล้ว

    thanks

  • @ukasztyminski8029
    @ukasztyminski8029 3 ปีที่แล้ว

    thank You