Just modified mine today. Wow! Not much wiggle room at all. Didn’t want to jack it up so checked and moved my original marks over. Glad I did. Also I triple checked before drilling. Can’t wait to get back to the shop to put these back to work. Thanks for this video!
I also believe that the 1919 is a much better machine than the Andis Cordless Master - I can say that because I own both. So this mod improves both Clippers and turns the new machine much better than the previous and even almost as good as an original corded Andis Master.
@@jezebulls you can zero gap them all you need to do is buy the bracket that doesn't have the middle hole (i.e magic clip bracket) replace it same way as in the video and you can zero it
You know eddies doing good when he starts getting salty grown ass men. Let this man do his thing he’s an educator doing all this for free keep that negative energy away
Eddie, I just found your vids. great stuff for non pro's even. Oh and I almost didn't recognize you with a beard. Good thing your voice is so recognizable.
Thanks for the tutorial, I just subscribed! I am not a barber, but i self cut and have been doing it for many years. Ive been an Andis guy the whole time but my hand has been cramping while fading the back of my head. This is obviously the weight of the Masters and maybe me getting old. Do the 1919 wahl weigh more than the regular magic clips? Cause I love the steel case look! Thanks
Yoo. Whats good Eddie,Good video. For a more simple and efficient way,just swap the bracket that holds the blade from the wahl seniors eazy as hot tortillas.
Also, do I need to have the little thread inserts that come with the kit? They look like little springs. Basically, I drill the hole and then use the 8/32 bit. Afterwards I don’t need any type of thread insert right?
With the oster fast feeds, after fading to the open taper, can you go in with the #1 open and fade down then take out the line with the 1/16 guard open if needed? I’ve only seen you fade this way with wahl clippers so far. Love the videos btw man!
Hey brother thanks for the vid man. I wanted to ask, have you tried a ceramic blade with this Andis blade setup? If you have, does it still crunch, does it get hotter/cooler?
@@samialamienyes sir! of course I have it. it's good tool, but I don't think it will give you the power that you need in a clipper for obvious reasons. If You're starting as a barber you might need more time for details in the blend and I personally think corded clippers are better for starting, cause you can focus 100 percent on the haircut, and by the time you get ready to have you cordless, you will feel the difference. And trust me, that is an experience that as a pro, you won't want to lose. If you want to go cordless anyways, my recommendation is, bring the magic clipper back and buy a senior's or 1919 Wahl you will be investing your money wisely thinking about the future! Unless you have the black or metal magic clipper. The red one is the one I have is good to fade but it has no power with longer hair. So I'll say seniors or Andy's Masters! God bless you....keep it on! ....
@@ddero1979 I see. Actually, the clipper I got is Wahl 5 star magic clip, the corded one, which is a bit cheaper than the cordless. I don't know if it's a weaker machine given that it's about the half the price or if price difference is due to the fact that it's cordless.. but I think I'm gonna keep it for a while. Good looking out man, appreciate it
@@samialamien I just returned my Wahl Magic clips today for the Wahl seniors and trust me the Wahl seniors have more power but what the people at the barber supply store told me confused me. They told me that the Wahl magic clips the Wahl seniors have the same exact motor and parts 🤔 I couldn't understand that because clearly you can see that the Wahl seniors have more power and how they cut better
Yanez The Barber & Clipper Scientists definitely ordered the bracket from filthy blends and it didn’t fit well and was very difficult to line up. You should make your own much cheaper.
Yo ed what fading techniques would you recommend to someone trying to cut their own hair? i've been having some trouble blending around the parietal ridge, trying to cut a textured quiff . I wanted enough hair to be able to comb forward with some matte clay since I got thick asian hair that spikes up. Thank you for all the content my fades are looking cleaner every day🙏
The magic clip and the masters is same Price here in Denmark i mean almost same Price , should i go through this process Or just buy the Masters ? Also the Masters Can they even zero gap??
Hi. I’m more into Wahl guards but sadly I have a Andis machine that need a blade. What my question is... are there any Wahl machine blade that could work ?
Juan Cordova this guys a bum buys a bracket off me and goes and does a TH-cam tutorial on how to make one and fuck it up. Don’t support this clowns hustle. He wanted to be known now he’s known for being a slime ball
Good video, have you tried the andis pro alloy and pro alloy fade blades? There taper blade are pretty much like master blade n the fade blade is like a fade master blade. They fit right on the wahl bracket with no modification.
No you would have to modify them like you would to fit a wahl just not as much bc they are larger blades than wahl. The single magnetic fit perfectly tho.
isaac88ig yea, that’s what I thought. Nobody seems to like the single magnetic Andis guards, so this mod isn’t necessarily about having any Andis blade on a Wahl clipper, but being able to use the double magnetic Andis guards on a strong cordless clipper.
@@isaac88ig but say for the fade blade, you can just put it onto say a magic clip with no modifications, but u can only use the single magnet guards if you want. I just want a fade blade like the masters on some magics for the bottom line for skin fades
Hey! I’ve been watching a lot of your videos, I saw that using a detachable blade clipper would help save time. I’m currently in barber school so I looked around and found the oster outlaw for like $80. Would that be an ok machine to start with? Or would you recommend me to save for the oster 76 or something like that?
Man I'm still in love with your channel and tutorials. But this one not at all. Reason do the same but instead you have to do all this. Try what I did. Simply change my Wahl lengends blades sistem to the 1919. End of the game all about Wahl beats Andy's they can't even try. Wahl have everything I need I'm tire to still traying with Andy's.gid bless you and good job ...
The blade from the 1919 is just a standard taper blade, man. Wahl got you fooled. 1919 is a Cordless Senior with an all metal body with a taper blade, fool. Lol!
Lol! I respect your opinion! Yes sir that's all I need standard Wahl "1005 3 hole blade"...Which is one of the best of the best barbers favorite. And one of the most famous blades world wide! Wahl doesn't foolish no body here. Lmao!!! they invented, build and create the first electric clipper in the world and makes barbering one of the most profitable industry world wide. Nope it's no the same senior's are very different to 1919. But I have no time to explain. If you want any time we can compete one to one any hair cut of your choice in any tipe of hair with any tipe of head. Me with any Wahl clipper and you with your favorite one of any brand. And I show you why This my preferences .... God bless you much love!
@@ddero1979 Hey. What is the difference between Wahl 1919 and Wahl Senior? And which one is better? I would really appreciate it. I have the Wahl Seniors
I’m getting a pair of 1919 soon and was thinking of making them a pair of wahl legends with the bracket and blades anybody who’s already done this who can share their thoughts
Who cares if he showed people how to drill and thread a couple of holes? There is always going to be a market for people who want to do it themselves vs people who will pay someone else to do it. I don't recall him saying "I created this Mod" or "I invented this mod". He did say he figured it out, if I'm wrong, hit me with a time stamp
Fact is he ordered it from me a week before this video and felt some type of way because I didn’t wanna send him one on the house for his channel I was too busy. So he pulled this stunt off. In fact I don’t care he did this video I made one showing how to make it. But don’t be a slime ball like that. So now we all know ed is a bitch in the barber game and he’s not welcome at any shows that’s all.
Phil_Bjj ordered them! Thanks. He mentioned you could order them online but doesn’t say from who as if it’s easy to search who sells them cause man I was googling and used reddit. It took me a minute. Glad you replied to my message to let me know! Dope!
I understand there are some pet clippers like the oster volt have pet clipper blades but are interchangeable with barber detachable blades. I’ve noticed clipper companies mark the price up for barber clippers and sell the exact clipper for pets with different blades at a cheaper price, my question to you is can u give us a list of animal clippers that can also be used by barbers for human use by converting the blades?? #barberonabudget
How are you gonna steal Philthy Blendz idea and step on his toes? U literally ordered the bracket from him. Stop chasing his clout and come up with your own shit. South Florida stand up pml
I understood everything, but you’re wrong with the dementions, no such thing as a 8/32nds only 7/32 and 9/32 Plus thats way bigger than 1/8, If you want to be slightly smaller than an 8th inch drill bit, id use 3/32 bit if you want to be slightly bigger than an 8th you drill with 5/32 Oh and btw 8/32 would be a hole equal to 4/16 which is 1/4 drill bit thats fucking huge!! Lol
Just modified mine today. Wow! Not much wiggle room at all. Didn’t want to jack it up so checked and moved my original marks over. Glad I did. Also I triple checked before drilling. Can’t wait to get back to the shop to put these back to work. Thanks for this video!
I also believe that the 1919 is a much better machine than the Andis Cordless Master - I can say that because I own both. So this mod improves both Clippers and turns the new machine much better than the previous and even almost as good as an original corded Andis Master.
At first the cool factor makes me think I should do it, but then I remember I really like the 1919's as-is and love the Wahl premium guards...
Blake P even though they don’t zero gap?
Jasper Sihoe mine are zeroed
@@jezebulls you can zero gap them all you need to do is buy the bracket that doesn't have the middle hole (i.e magic clip bracket) replace it same way as in the video and you can zero it
Are you trying to singlehandedly slow down cordless Masters sales? DAMN YOU, EDDIE!!!
Andis spokesperson here lol
Are you selling the bracket already cut.
all u need is a fade master blade on a magic clip and keep ur stock wahl 1919 stock 2 clips no wires crisp fades
Does this work with the Wahl Designers
You know eddies doing good when he starts getting salty grown ass men. Let this man do his thing he’s an educator doing all this for free keep that negative energy away
Thanks! Respect the rankings! Some people doesn't understand simple fact's...
First person I see doing this! I think it’s amazing!
@@topteam22 What he stole from you?
Who Killed Me? Buddy ordered a bracket from me and then makes a video on how to make it. He’s a slime ball
I bought the mod bracket and cut today for the first time with the mod. The cut was ok, maybe I need to cut with it more to get an honest opinion.
Best mod out.... been using it for a couple weeks now, straight 🔥🔥🔥🔥
Check out Philthy blends
My boy thanks for the support. This guys a clown. I mass produced this for y’all. But not this clown
Does the top moving blade comes loose? I read a comment by one guy saying he had to tighten the screws sometimes.
@@topteam22 Can I buy it off you? I want to put it on my Wahl Seniors. Please let me know
@@xHustleHaRdx ya go to my ig and dm me philthy_blendz or website philthyblendz.com
Eddie, I just found your vids. great stuff for non pro's even. Oh and I almost didn't recognize you with a beard. Good thing your voice is so recognizable.
Thanks for the tutorial, I just subscribed! I am not a barber, but i self cut and have been doing it for many years. Ive been an Andis guy the whole time but my hand has been cramping while fading the back of my head.
This is obviously the weight of the Masters and maybe me getting old.
Do the 1919 wahl weigh more than the regular magic clips? Cause I love the steel case look! Thanks
Hey Eddie, do you get the trademark andis master crunch when doing this modification?
Yoo.
Whats good Eddie,Good video.
For a more simple and efficient way,just swap the bracket that holds the blade from the wahl seniors eazy as hot tortillas.
How have these held up over time. I’m planning on doing this next month
Did this mod to my Andis envy li with Andis masters blade a couple years works good...
Also, do I need to have the little thread inserts that come with the kit? They look like little springs. Basically, I drill the hole and then use the 8/32 bit. Afterwards I don’t need any type of thread insert right?
Does it even make sense to do since the Wahl doesn’t open up to a 1?
With the oster fast feeds, after fading to the open taper, can you go in with the #1 open and fade down then take out the line with the 1/16 guard open if needed? I’ve only seen you fade this way with wahl clippers so far.
Love the videos btw man!
@@Carlosgarcia-og7hf You don't need to close the Wahl #1 guard either?
Dope video thanks! How is the bulk removal with that blade?
Hey brother thanks for the vid man. I wanted to ask, have you tried a ceramic blade with this Andis blade setup? If you have, does it still crunch, does it get hotter/cooler?
And the seniors are way cheaper. This is a great idea!
Do you still get the signature sound of hair cutting with the master blade on it?
hey man, which clipper do you suggest for someone who's just starting out? btw, your videos are really helpful, keep up the good work
Wahl designer or senior's 5star. Trimer Andy's styliners outliners or wahl datailers!
@@ddero1979 I just bought the wahl magic clip earlier today, do you know if it's any good?
@@samialamienyes sir! of course I have it. it's good tool, but I don't think it will give you the power that you need in a clipper for obvious reasons. If You're starting as a barber you might need more time for details in the blend and I personally think corded clippers are better for starting, cause you can focus 100 percent on the haircut, and by the time you get ready to have you cordless, you will feel the difference. And trust me, that is an experience that as a pro, you won't want to lose. If you want to go cordless anyways, my recommendation is, bring the magic clipper back and buy a senior's or 1919 Wahl you will be investing your money wisely thinking about the future! Unless you have the black or metal magic clipper. The red one is the one I have is good to fade but it has no power with longer hair. So I'll say seniors or Andy's Masters! God bless you....keep it on! ....
@@ddero1979 I see. Actually, the clipper I got is Wahl 5 star magic clip, the corded one, which is a bit cheaper than the cordless. I don't know if it's a weaker machine given that it's about the half the price or if price difference is due to the fact that it's cordless.. but I think I'm gonna keep it for a while. Good looking out man, appreciate it
@@samialamien I just returned my Wahl Magic clips today for the Wahl seniors and trust me the Wahl seniors have more power but what the people at the barber supply store told me confused me. They told me that the Wahl magic clips the Wahl seniors have the same exact motor and parts 🤔 I couldn't understand that because clearly you can see that the Wahl seniors have more power and how they cut better
Nice mod Eddie. Yeah You should make a video of your steps using the andis guards.
So the moving blade is the wahl blade ?
Yeah
Can you make a video modifying the bracket to fit a fast feed blade?
Do you think I can do it on the .50 Cal???
Yanez The Barber & Clipper Scientists definitely ordered the bracket from filthy blends and it didn’t fit well and was very difficult to line up. You should make your own much cheaper.
I sell them for the 50 cal. Philthyblendz.com
I have 2 pair of wahl legends. With my extra pair ima do this to but a add a phat master blade instead.
If you get a chance to review the cordless masters...can you do a comparison with them and your Wahl senior mod
I haven't been to your channel in awhile glad to see you posting videos almost didn't recognize you with the beard 😂
Yo ed what fading techniques would you recommend to someone trying to cut their own hair? i've been having some trouble blending around the parietal ridge, trying to cut a textured quiff . I wanted enough hair to be able to comb forward with some matte clay since I got thick asian hair that spikes up. Thank you for all the content my fades are looking cleaner every day🙏
if you can do some tutorials how to blend with the magnet guards that would be great!!
Fun content for the clipper and tool heads.
The magic clip and the masters is same Price here in Denmark i mean almost same Price , should i go through this process Or just buy the Masters ? Also the Masters Can they even zero gap??
How much does they cost?
B. O. 200 $ for magic clip and 220 $ for andis Master cordless
Hi. I’m more into Wahl guards but sadly I have a Andis machine that need a blade. What my question is... are there any Wahl machine blade that could work ?
I have a a magic clip what the fade master blade and its my favorite clipper now
Philthyblendz.com already done for you
Yes sir I bought the bracket from you👍👍
Don’t support this bum
@@topteam22 what's that about?
Juan Cordova this guys a bum buys a bracket off me and goes and does a TH-cam tutorial on how to make one and fuck it up. Don’t support this clowns hustle. He wanted to be known now he’s known for being a slime ball
always putting out amazing content brother ! thank you !
Good video, have you tried the andis pro alloy and pro alloy fade blades? There taper blade are pretty much like master blade n the fade blade is like a fade master blade. They fit right on the wahl bracket with no modification.
But can you put the double magnetic guards on them?...
That’s the primary reason barbers are doing this.
I need to know more about this
No you would have to modify them like you would to fit a wahl just not as much bc they are larger blades than wahl. The single magnetic fit perfectly tho.
isaac88ig yea, that’s what I thought. Nobody seems to like the single magnetic Andis guards, so this mod isn’t necessarily about having any Andis blade on a Wahl clipper, but being able to use the double magnetic Andis guards on a strong cordless clipper.
@@isaac88ig but say for the fade blade, you can just put it onto say a magic clip with no modifications, but u can only use the single magnet guards if you want. I just want a fade blade like the masters on some magics for the bottom line for skin fades
Eddie, What Parts do I need to buy to do this Mod ?
I've been waiting for this video!!👊🏿👊🏿👍🏿👍🏿🔥🔥🔥
I have a corded wall sterling4 and master blades. Can I do the same modification?
I almost cut my freakin beard! Sigh of relief * lmfao 😂
can you do this mod on a wahl senior (corded)?
Yes
do you know if the Andis envy
li will fit the mod bracket for wahl since the envy li can fit wahl blades?
How much of a gap do you get after andis blade mod is t 0gap to 1inch?
Yesss!!! I'm here for it
Hey! I’ve been watching a lot of your videos, I saw that using a detachable blade clipper would help save time. I’m currently in barber school so I looked around and found the oster outlaw for like $80. Would that be an ok machine to start with? Or would you recommend me to save for the oster 76 or something like that?
Did you finish barber school??
So doesn’t work on the magic clips bracket right?
Eddie , maybe I should Ask you If you have a 1919 already modified for sale ?
Wish you had links in your description for parts
Philthyblendz.com I sell them done
question. do u only change the bottom blade?
Yes, stock Wahl cutting blade remains in tact
@@BlakeSuperior_Beats 👊🏿👊🏿👊🏿
Im feeling like a idiot Ive never used the double magneric guards! Thanks for sharing!
We ain’t tryna see this. Wheres that oster blade on the wahl
I wish to have that nice clipper in my station
Yo you the man my bro thanks for the tip
Yooooo legit video
It's the Chad 😂
Dope mod
So does it cut from 000 to a 1 then?
Which blade to use, the #22 or #28?
You have to use the Wahl bottom blade. You’re only using the andis top blade.
Can you do this modification with the magic clips
Philthyblendz.com sells them
I'm doing a fast feed top blade mod
Joel Powell did you get the fast feed mod going ?
i would also like to know how it turned out
First and I really enjoyed this video good brother
Do it on the babyliss or 50 cal clippers
gains Gaming I did already philthy_blendz ig come see what he’s stealing from me lol
@@topteam22 Lol!
I need that gold fx
Man I'm still in love with your channel and tutorials. But this one not at all. Reason do the same but instead you have to do all this. Try what I did. Simply change my Wahl lengends blades sistem to the 1919. End of the game all about Wahl beats Andy's they can't even try. Wahl have everything I need I'm tire to still traying with Andy's.gid bless you and good job ...
The blade from the 1919 is just a standard taper blade, man. Wahl got you fooled.
1919 is a Cordless Senior with an all metal body with a taper blade, fool. Lol!
Lol! I respect your opinion! Yes sir that's all I need standard Wahl "1005 3 hole blade"...Which is one of the best of the best barbers favorite. And one of the most famous blades world wide! Wahl doesn't foolish no body here. Lmao!!! they invented, build and create the first electric clipper in the world and makes barbering one of the most profitable industry world wide. Nope it's no the same senior's are very different to 1919. But I have no time to explain. If you want any time we can compete one to one any hair cut of your choice in any tipe of hair with any tipe of head. Me with any Wahl clipper and you with your favorite one of any brand. And I show you why This my preferences .... God bless you much love!
@@ddero1979 Hey. What is the difference between Wahl 1919 and Wahl Senior? And which one is better? I would really appreciate it. I have the Wahl Seniors
I’m getting a pair of 1919 soon and was thinking of making them a pair of wahl legends with the bracket and blades anybody who’s already done this who can share their thoughts
Philthyblendz.com sold all day
But why mod? Why is the wahl clipper preferred over the andis and andis blade over the wahl. Is it the 200$ tag on the andis masters
Cheaper alternative and you can use the Andis double magnetic guards.
I see your a bills fan are you from buffalo
Can you make the peice for me bro? Ive tried and messed it up. Im willing to pay what ever for it. As i see it as worth it
babyboy505018 Philthyblendz.com order now ! He bought my bracket and used it in the video
@@topteam22 hell yea bro
like the vids bro
are u selling these brackets??
I do. Philthyblendz.com
Thank you Eddie for this Video👍🏽#50k
Who cares if he showed people how to drill and thread a couple of holes? There is always going to be a market for people who want to do it themselves vs people who will pay someone else to do it. I don't recall him saying "I created this Mod" or "I invented this mod". He did say he figured it out, if I'm wrong, hit me with a time stamp
Fact is he ordered it from me a week before this video and felt some type of way because I didn’t wanna send him one on the house for his channel I was too busy. So he pulled this stunt off. In fact I don’t care he did this video I made one showing how to make it. But don’t be a slime ball like that. So now we all know ed is a bitch in the barber game and he’s not welcome at any shows that’s all.
@@topteam22 🤣🧻
You know anyone selling the slide blade piece ? Or the modified clip?
Omar me. Philthyblendz.com he ordered the bracket from me and then does a video claiming the fame lol
Phil_Bjj ordered them! Thanks. He mentioned you could order them online but doesn’t say from who as if it’s easy to search who sells them cause man I was googling and used reddit. It took me a minute. Glad you replied to my message to let me know! Dope!
Can I buy one from you? ASAP
Philthyblendz.com
I want to do these to my legends
Philthyblendz.com
I understand there are some pet clippers like the oster volt have pet clipper blades but are interchangeable with barber detachable blades. I’ve noticed clipper companies mark the price up for barber clippers and sell the exact clipper for pets with different blades at a cheaper price, my question to you is can u give us a list of animal clippers that can also be used by barbers for human use by converting the blades?? #barberonabudget
Haha man I don’t have the tools to do this. No garage for me to buy equipment. 😭 i would buy the modified bracket
Philthyblendz.com is where to get them just like he did lol
@@PhilthyBlendz How much? And can you send me the link to directly buy the bracket please? I would really appreciate that
@@xHustleHaRdx philthyblendz.com or philthy_blendz ig
Bro can I have the master
Did you use the Andis cutting blade as well for the MOD?
Send me them masters you don't use. Lol
hey man can you mod me up one of these and ill pay you?
Could've saved time and bought Pre-Made Slides @Philthy_Blendz
How are you gonna steal Philthy Blendz idea and step on his toes? U literally ordered the bracket from him. Stop chasing his clout and come up with your own shit. South Florida stand up pml
Brasil...
I understood everything, but you’re wrong with the dementions, no such thing as a 8/32nds only 7/32 and 9/32 Plus thats way bigger than 1/8, If you want to be slightly smaller than an 8th inch drill bit, id use 3/32 bit if you want to be slightly bigger than an 8th you drill with 5/32 Oh and btw 8/32 would be a hole equal to 4/16 which is 1/4 drill bit thats fucking huge!! Lol
U
Wow can you just make these brackets and sell the brackets to us. So sick of buying Andis masters every year
Man you over-talk!