Wow so much work and money you put into these cars Pete ! So different from the 70's when "Balmy" Ted Butler used to celebrate his ample wins by rolling it across the finish line at Arlington, with all the doors opening as he rolled ! 🤣
Alright pete Now we have Wayne's world merch are we going to get joey the fire warden merch out also. Absolutely love your videos they make me laugh so much please don't ever stop making them
Huh, so it seems the legend was correct - it wasn't a myth... ...the bench top is indeed flat. Whodafunkit 😆 If your 'somewhere safe' is like mine - its got a lot to answer for! However, after re-buying the bits and pieces that were put into said 'somewhere safe' - when you later find the sodding place again - its like finding a couple notes in a jacket you last wore going out-out! 'Cracking' work on that diff, as for bolts - etc - nesquick tubs are great - bright yellow so they stand out and you can write on them! Looking forwards to the next episode!
As much as i admire the effort time and money that goes into these modern cars , buts its as far away from banger racing as its ever been for most people The Bws is a totally different level . Its pretty much professional now .
Everyone has a different level they want to compete at. Much easier to go racing in a Volvo 740 on the key but this is where racing has evolved to in order to be competitive and up in the top of the points unfortunately.
Races are won in the garage - totally relate to that when I was racing Superstox. Sometimes hours and days in the garage for 30s racing - rolling lap music stops and already had a crash - been there done that - good vid mate
I'm glad I race E46 bmws I'd hate to do all that pissing around with rear axles on those jags. Never forget doing a set of rear discs and pads on a series 3 Xj6 when I first started out in the motor trade......ball ache was an understatement
Great video Pete.. All sweat and tears and then Wayne's love life you should get a t shirt done.. That race engine is definitely packing horse's now...
Loved this vid Pete the building and rolling road , it's tough work but rewarding. Must visit you in the pits, NAT west NAT chasing Wayne around would be a laugh 😂😂
Pete your brilliant and funny been waching ever since you was racing for the dreamers and your sense of humour hasn't changed ever don't change if you did it woundnt be you other wise
But I must admit I go to lowmans quite alot n mike n rob are really nice ppl to be honest,, ime just a man with a van that helps r Phill n Tommy 299 n Ricki 455 out with engine transport n stuff,,so ime sort of behind the seens helper if you get me,,,bt i love it!!!😂😂🏁🏁🏁🏁
it sounds a bit crazy having to use a built engine in a banger that might get destroyed in one meeting, how many meetings do the engines last normally?
Fix that lift eh? The Hydraulics are bleeding past the valve, and it lifts several inches on the right side before the left. Tighten the cables. I can refer you to a hydraulics company in your area if you need help.... ;)
Seals in the ram are knackered that's why I got it cheap, it'll stay like that until it breaks! Chain has snapped twice too, hence the wonky elevation haha
Great stuff. New race engine, now don't crash it.... oh wait, that's exactly what's going to happen. Well good luck to you and let's see if that engine is a winner.
140bhp ish standard. built one will range from 170-195 ish. unrealistic to get more than 200bhp because you physically can't get any more air through the size of the carburetor.
Spinner/shutter or "divvy dag" bolts used for concrete shuttering. quick and easy to undo with a course thread so we don't chew it up when we crash like normal nut and bolt thread.
![Customer States & Mechanical Fails [Part 39]](http://i.ytimg.com/vi/bc6ux02EZw4/mqdefault.jpg)
![[TH] 2024 PMSL SEA Finals D3 | Fall | รู้ผลทีมแชมป์ พร้อมตั๋วสู่ PMGC](http://i.ytimg.com/vi/7NxsN0Ch6vk/mqdefault.jpg)
I can’t believe how much work goes into the bangers nowadays. Credit to everyone involved, I’m worn out just watching you guys.
Wow so much work and money you put into these cars Pete ! So different from the 70's when "Balmy" Ted Butler used to celebrate his ample wins by rolling it across the finish line at Arlington, with all the doors opening as he rolled ! 🤣
When I raced one of the rules was "No race built engines" !!!!
When I built bangers everything was a struggle 😂😂😂
Great episode, some amount of work and time/money spent on the car,hopefully you get paid back well and you looked well tired mate. All the best 👍
Awesome stuff m8 ,total dedication hope the hard work and late nites pay off you do well 🏁🏁
I wish I could get there tomorrow! I wanna hear more of waynes world! Why dustcapped I always wanted to ask that!
Be interesting to see if natwest nat and tescos tina watch these episodes 😂
Alright pete
Now we have Wayne's world merch are we going to get joey the fire warden merch out also.
Absolutely love your videos they make me laugh so much please don't ever stop making them
It's worth watching just for Wayne 😂😂😂😂🔧⚓🤠 JB
Bloody hell… the bench is tidy!
Huh, so it seems the legend was correct - it wasn't a myth...
...the bench top is indeed flat. Whodafunkit 😆
If your 'somewhere safe' is like mine - its got a lot to answer for! However, after re-buying the bits and pieces that were put into said 'somewhere safe' - when you later find the sodding place again - its like finding a couple notes in a jacket you last wore going out-out!
'Cracking' work on that diff, as for bolts - etc - nesquick tubs are great - bright yellow so they stand out and you can write on them!
Looking forwards to the next episode!
I think we need to meet Waynes dog!
Keep Watching!
As much as i admire the effort time and money that goes into these modern cars , buts its as far away from banger racing as its ever been for most people
The Bws is a totally different level . Its pretty much professional now .
Everyone has a different level they want to compete at. Much easier to go racing in a Volvo 740 on the key but this is where racing has evolved to in order to be competitive and up in the top of the points unfortunately.
Love this channel,,keep up the great work
Another brilliant video keep up the good work fella and wayne good luck with the ladys 😂👍
Races are won in the garage - totally relate to that when I was racing Superstox. Sometimes hours and days in the garage for 30s racing - rolling lap music stops and already had a crash - been there done that - good vid mate
I'm glad I race E46 bmws I'd hate to do all that pissing around with rear axles on those jags. Never forget doing a set of rear discs and pads on a series 3 Xj6 when I first started out in the motor trade......ball ache was an understatement
Ahahaha Wayne is an absolute legend 😂😂.
Love your videos Pete. Keep up the good work! 💪🏼
Great video again mate,getting better and better.
Brilliant video as always.................
Thanks again!
Another great video,keep them coming.
Great video, sure your hard work will be well worth it mate
The paddock wood player his self be Tring to get his nozzle in tesco Tina and natwest nat and fill them up with his foam 😂😂😂😂
Great video Pete.. All sweat and tears and then Wayne's love life you should get a t shirt done.. That race engine is definitely packing horse's now...
Thankyou so much for using lyndale race engines!!
#no1enginebuilder
Keep up that good work pete loving thw videos
Loved this vid Pete the building and rolling road , it's tough work but rewarding. Must visit you in the pits, NAT west NAT chasing Wayne around would be a laugh 😂😂
I've been to lyndale a few times to drop engines of n stuff n Keith is a really nice blocke 🏁🏁
Thinks Wayne needs a all star garage T-shirt to wear in the videos get him a xxxl ordered up👍
Wow how things progress can't spot it
Awesome video mate 👍
Thank you!
Lmfao, Wayne's the boy,,NatWest NAT n tescotina ime howling 😂😂😂😂😂😂🏁🏁🏁🏁
One Wayne and his dog!!!
And a bottle of expanding foam!
Happy viewing whilst im in Spain,unfortunately wayne you're situation will not end well😮,new car looks pucker😅
Another great video mate
Thanks 👍
Jay is a top man at Lyndales 👍
Pete your brilliant and funny been waching ever since you was racing for the dreamers and your sense of humour hasn't changed ever don't change if you did it woundnt be you other wise
Cheers mate
@Allstar_Garage anytime mate honestly you deserve brilliant commitments and brilliant feedback
The plot thickens 😂😂😂
Fill him up, not from the top end either 🤣 if that isn't on a bonnet soon with a drawing of squirrel and a tin of foam 🤣
Amazing wasn't it!
But I must admit I go to lowmans quite alot n mike n rob are really nice ppl to be honest,, ime just a man with a van that helps r Phill n Tommy 299 n Ricki 455 out with engine transport n stuff,,so ime sort of behind the seens helper if you get me,,,bt i love it!!!😂😂🏁🏁🏁🏁
Hay mate send me over the cracked back plate I’ll weld it back up for you 👍
it sounds a bit crazy having to use a built engine in a banger that might get destroyed in one meeting, how many meetings do the engines last normally?
Not long with my track record!
Fix that lift eh? The Hydraulics are bleeding past the valve, and it lifts several inches on the right side before the left. Tighten the cables. I can refer you to a hydraulics company in your area if you need help.... ;)
Seals in the ram are knackered that's why I got it cheap, it'll stay like that until it breaks! Chain has snapped twice too, hence the wonky elevation haha
@@Allstar_Garage You are scarey. Keep it up man! One of the 4 youtubers I always watch.
Great stuff. New race engine, now don't crash it.... oh wait, that's exactly what's going to happen. Well good luck to you and let's see if that engine is a winner.
"I don't need this stress in my life" 😭😭
Cmon bodja
I no how u feel it’s all about the kids buddy
Not sure if you’ll be able to say, but do they use a standard map for all 2.3 or are they all set up individually to suit?
suited to the engine build unless standard.
What sort of power do these engines get? i know u dont want any1 to know exactly but just roughly, also what engines are they?
140bhp ish standard. built one will range from 170-195 ish. unrealistic to get more than 200bhp because you physically can't get any more air through the size of the carburetor.
Wot bhp is the engine
What kinda bolts do you use on your hood/bonnet?
Spinner/shutter or "divvy dag" bolts used for concrete shuttering. quick and easy to undo with a course thread so we don't chew it up when we crash like normal nut and bolt thread.
What sort of BHP was the engine kicking out on the rolling road?
Enough, hopefully!
You going to smallfield for the Brett fry memorial on 14th July
No mate afraid not.
Love the content 👌
There a shit to strip down,,seen r Phil n Tommy do um 😂😂😂😂
Need some of waynes dating advice 😂
Good friend don’t want to be named is code for robbed the cupboard at work
😂😂😂
im back again 1st comment
No your not 🎉
I hate bangers lol 😂
Great input mate 🙃
But love the channel it’s awsome
Hate bangers but love a channel all about bangers think you need some help there don 🤪
@@russnunn2456 it was a joke my comment was ment to be about the stress that goes with it like jag axels with siezed bolts as I raced loads of jags