Chain Adjustments | 400ex Build [Part 13]
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- This is just a quick video of how I adjust my chain! It also shows you guys a better view of my bearing carrier and how bad it's gotten! I will definitely need to replace it really soon! ( wink wink). let me know what you guys think or if you have any questions just leave them down below in the comments!
Always wear a helmet! I know that in some of my videos people do not wear them but please don't be like them! Wear a helmet it can save your life!
SUBSCRIBE to my channel here!
/ @athenasgarageoffical
Watch My 400ex Adventures playlist here:
• SINKING THE HONDA | TR...
Watch my 400ex Build playlist here:
• PROJECT HONDA TRX 400e...
#ATV #400ex #Chain
Music: Bensound.com
Disclaimer: I am not a professional and therefore not responsible or liable for any damage that you cause your own vehicle. If you can not figure out the problem take it to a local mechanic shop\ATV repair shop. Please do not recreate or attempt anything done in the videos presented.
Seems like mines won't loosen for me to put my new chain on it or tighten my old chain. Seems stuck
The carrier could be stuck if it hasn't been changed in a while
The thing to put the screwdriver into and move to tighten the chain won’t budge at all what do I do
Is it already tight? If it's not, it's probably seized up may have to try and heat it up, or spray some lubricant on it
@@AthenasGarageOffical so my chain is loose and when I put my screwdriver in the slot to push down, it doesn’t budge.
@@AthenasGarageOffical do you know what that could be?
Without seeing it, kinda hard to tell. It's been a min since I worked on a straight axle. Is it turned all the way already?
@@AthenasGarageOfficalsorry what do you mean but all the way?
My carrier is all the way back and the chain is still loose. What should I do?
Only think I can think of is cut a link off or get a new chain
Mine is rubbing on my skid plate what do i do
Gonna have to bend the skid plate out did u hit something?
Has that chain loosened a lot? I've heard people have issues with those red colored ones from ebay/Amazon. I just got a did xring for mine
Well because I've had so many issues with the rear end and all the problems that have been going on with the bearing carrier and stuff I didn't really get to notice and so far it doesn't seem like it has been but I haven't rode much since I fixed all the other issues
That carrier bearing is bad..axle is moving up and down..
Yea I replaced it eventually