Anyone doing this should know that you can pull the wiper arms, bezel and a few 10mm bolts later the entire wiper assembly is out. Area is very open and accessible. Had to go after a rattling heat shield on the header pipes yesterday.
@@L8R-HP Yep, unfortunately I may be swapping out my ABS soon too. Chirps while brake pedal pressed. Waiting for those codes to pop up. Glad it worked out for you!
Inverted Reality o yea, it’s been a few months and still going strong, I was a bit worried about getting a refurbished part but it’s been good to me. Hope yours works out as well.
@@1nvertedReality I've heard that, that is supposed to sound like when you press the brake but not while in motion or constantly as shown in the video.
Looking at the ABS pump you have to remove the brake lines and brake line bracket from the left side and on the right side you have to remove the auxiliary heater core pump which is bolted to the large bracket on the right side of the ABS pump
Mine's been making that noise, as well as a wood pecker/knock sound for a while. Got these codes yesterday (128,000 miles). I flashed the codes and plan on driving it until I get the problem consistently. Thanks for the video! I'll follow it when I have to do it
@@Luis-lj9cp It's the ABS actuator that's bad and needs to be replaced. As of writing that comment, a couple months later, my brakes went completely out and it would have cost me $3k to fix it so ended up selling my '04 and buying a '10
Can you give us some information of where and how you came up with a actuator you do not have to Program that fits your particular vehicle, Thank you for posting
FYI Although some on TH-cam want to be "different" the background "music" is too much.....Did I miss or not view or see the following... the physical removal/replacement of said ABS module... Brake fluid removed/replaced with bleed out ....However nailed the Inverter removal/replacement....FYI also I am of the thinking that said ABS module "noise" "chatter" "chirping" may be the coming and /or partial failure of 12 volt DC motor (silver cover) bearing/ carbon brush contain within ABS pump actuator module
Not trying to be “different” just record whatever, not trying to have a “how to” channel ether. Whatever I record I post just for fun, if it helps someone that’s awesome 😎 thank you 😊
Check your part number. www.ebay.com/itm/2004-2009-TOYOTA-PRIUS-ABS-ANTI-LOCK-BRAKE-PUMP-ACTUATOR-ASSEMBLY-44510-47050-/185018258307?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Giovanny I used a vacuum bleed from harbor freight that connects to an air compressor, it worked great, start from the far right rear wheel and then left rear then right front and then left front, with a scan tool it’s a faster process, but if you don’t have a scan tool to bleed brakes you may have to repeat the process a few times after a drive.
@@L8R-HP Well, I got everything out and replaced the pump. I got it all back in but the same lights are still on, plus now I have the red triangle too. Also it won't reset or start the engine. Now what?...
@@L8R-HP I really do appreciate you responding back to me. You are more real than most content creators in that regard. However, even though I did find out that I didn't have te orange fuse pushed down properly, after I fixed that, it still didn't work... Gonna keep trying though.
Cool Video. Question: The clicking sound in back of the inverter area and the same sound at 1:11 in the video is that the sound of the pump going on and off? Did that sound continue the same way after you put in the rebuilt ABS Actuator? Is that a normal sound or does that mean it's going bad? ThanksI have the same sound but it goes on and off contently..but just doesn't stay on...
Did you notice the dog tag necklace thing dangling around the inverter.. def mad me nervous seeing that.... and yeah thos gloves would of provided no protection if the hybrid cables were live
@@josegarcia-c9e9d that’s why you disable the hybrid battery and the secondary battery before doing this. Rubber gloves did help. Any electrician would know that. Unless of course i started licking the battery terminals and hooking them up to my nipples 😂. Maybe next time… ✌️
Thank you for your video. My car has the same fault as yours. I refer to your video and bought a refurbished abs pump. But after I replaced it, when I did not perform bleeding, the fault codes C1256, C1253, And after opening the main driver's door, there was a continuous sound of high-pitched warning, which was very ear-piercing. This noise does not disappear. Does this mean that my newly bought abs pump is damaged, or is it because I did not perform bleeding? Now I may wait for the bleeding to see the effect, but I see that most people do not have any warning including my c1256 c1253 without bleeding, so I have little hope. I am hesitating whether I need to purchase an abs pump replacement again, which makes me at a loss. Thank you for your help
@@L8R-HP But I can still start the car! It's just that there are still warnings c1256 c1253 And accompanied by a harsh high-pitched warning, this high-pitched warning has no display on the dashboard，So, I can’t determine what caused my replacement abs pump No execution bleed appeared The two alarm codes and the high-pitched continuous beep in the case of
@@gushilin if everything is plugged in and those codes won’t clear with a scan tool it’s possible that the new/rebuilt unit u got is faulty. It should be under warranty tho and they will ship you another
@@L8R-HPwhat is your part number? Curios which part of the number is consider to be part number and trying to get one from a 2005 replacing a 2009 and actuator, wonder if those will be compatible if the part number 44510-47050 match is good enough?…
After bleeding brakes. If your battery was disconnected thru the whole process, once you bleed the brakes and connect the battery you should be good to go.
Yes, depending on where the failure is, it's usually the accumulator but when the ABS light is on, it usually means your ABS is OFF, which makes breaking in the rain or otherwise suddenly butt-puckering.
Worked on a 2008 and it gave c1256 and c1252 which I cannot find any info on. Anyone know what the c1252 along with c1256 would mean? Scanner says fix is to replace the ABS pump so not sure if it's nothing additional other than ABS pump
@@L8R-HP it is P1391, what is crazy is I brought a new actuator pump the one you replaced and it still had the brake light and abs with the (!) on and my mechanic followed everything he was suppose to do and it still didn’t solve it? what can you think is the problem?
@@L8R-HP I will check everything, do you think the brake fluid is bad I checked it and it has all black in the middle? Plus the cap to it was worn out so idk if air is getting in
No I think there's an updated and changed sticker for the updated part I know on the gen 3 this is the case it may be the same on the two and this part for the two has been NLA for quite some time so I'm wondering where this guy got this part it should have been about $1,400 new
Did the actuator make that noise constantly before or at the same time the lights came on? Will the breaks work if the actuator fails? Mine is making that noise every 10 seconds or so, I suspect a leak and the pump constantly starting in order to build back the pressure, but I don't have any lights on the dash yet. Thanks!
Yea that’s how it started, it would make the noise more often than normal and then the lights would come on once in a while. After that the lights would stay on full time. Brakes still worked tho.
I poured the coolant in and bleed the Brakes, starting with right rear, left rear, right front and left front. After that I did the bleed again with a scan tool. I don’t think the scan tool made a difference, but I cleared codes and it was good to go
Hi are you still able to drive the prius when the actuator failed? because my actuator is noisy and if it fails i want to place it in my garage to work on it. thanks
@@L8R-HP Good, i will know then when it is enough, thank you very much for answering. And good to know that the car is doing good, keep up the good content.
It would have been nice if you mention the smaller connectors on the back of the inverter, the two bolts on the backside of the inverter, the huge cast iron weight on the bottom of the abs bracket. Other than That, it’s a good video.
Well I mention that because I was digging to get the bracket out and had I known it was there, I would have known the unit needed to go up first then out.
Thanks for the video. I have to replace my ABS Actuator as well. Can you please advise where you purchased the refurbished part? Thank you in advance!!!
@@L8R-HP Thank you for the quick response. Did they by chance let you know how the part was refurbished and it the part still working good on your vehicle?
Paul Cubillos I didn’t ask, but the part looked brand new and once installed and bleed the brakes it works great, no programming required, make sure to match the part number
Paul Cubillos I bleed them with a harbor freight bleed tool and used a launch scan tool as well. Don’t think it really made a difference with or without a scan tool tho.
Good Morning. Has your 09 pruis starting singing my pruis am talking about that FUCKING beeping when put the car in used it does every 15 seconds are 15 minutes like you driving big truck 🚚 & also it feel like the pruis does not have power or does not have breaks. For me to get STOP pruis I have slam on the break and you hear the back wheel squealing. After that I got power breaks again. You can't go fast if so put your head between your legs KISS your good bye 👋. Oh did you have to bleed all 4-wheels get the air out your break lines. I hope to get more information about on pruis ABS. I'm calling from Houston TX & my name Michael.
Robert Steag I explain the bleed procedure in one of my other videos, it’s the same on all cars. No reason to do it in every video. Thanks for the tip tho.
![[#SHORTS CLIP] ใช้ของของตัวเองไปเลยสิคะ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/Ea_mTywx2p4/mqdefault.jpg)
Thanks for the vid. No music please. This is a complicated process, and I often replay bits to review.
Anyone doing this should know that you can pull the wiper arms, bezel and a few 10mm bolts later the entire wiper assembly is out. Area is very open and accessible. Had to go after a rattling heat shield on the header pipes yesterday.
Inverted Reality that would of been so much easier.
@@L8R-HP Yep, unfortunately I may be swapping out my ABS soon too. Chirps while brake pedal pressed. Waiting for those codes to pop up. Glad it worked out for you!
Inverted Reality o yea, it’s been a few months and still going strong, I was a bit worried about getting a refurbished part but it’s been good to me. Hope yours works out as well.
So removing those will give enough access to replace the ABS part?
@@1nvertedReality I've heard that, that is supposed to sound like when you press the brake but not while in motion or constantly as shown in the video.
Looking at the ABS pump you have to remove the brake lines and brake line bracket from the left side and on the right side you have to remove the auxiliary heater core pump which is bolted to the large bracket on the right side of the ABS pump
Mine's been making that noise, as well as a wood pecker/knock sound for a while. Got these codes yesterday (128,000 miles). I flashed the codes and plan on driving it until I get the problem consistently. Thanks for the video! I'll follow it when I have to do it
Would you happen to know what is the cause of the woodpecker sound? I hear it in my vehicle once I turn off the car.
@@Luis-lj9cp It's the ABS actuator that's bad and needs to be replaced. As of writing that comment, a couple months later, my brakes went completely out and it would have cost me $3k to fix it so ended up selling my '04 and buying a '10
Thanks for the video! The car looks really clean for a 2009
Thank you!!! 😀
Can you give us some information of where and how you came up with a actuator you do not have to Program that fits your particular vehicle, Thank you for posting
Scan the car for codes. If you have same codes as me, it’s the actuator. I got mine on eBay.com
PPP
P
Thank God for you! Saving me a ton on money.
Mine went out and I’ve been driving the car. Costly job. I ain’t dead yet. Doesn’t stop on a dime but it slows down.
Hello, I have a 2009 Camry hybrid, the abs are damaged, please tell me how it can be repaired and what part of the part is replaced and repaired?
Not sure on the Camry. But if you get the same part number on a ABS module you should be able to replace it and be good
What part of this unit is not working correctly . Why can’t you replace certain parts instead of the whole unit
FYI Although some on TH-cam want to be "different" the background "music" is too much.....Did I miss or not view or see the following... the physical removal/replacement of said ABS module... Brake fluid removed/replaced with bleed out ....However nailed the Inverter removal/replacement....FYI also I am of the thinking that said ABS module "noise" "chatter" "chirping" may be the coming and /or partial failure of 12 volt DC motor (silver cover) bearing/ carbon brush contain within ABS pump actuator module
Not trying to be “different” just record whatever, not trying to have a “how to” channel ether. Whatever I record I post just for fun, if it helps someone that’s awesome 😎 thank you 😊
ok but why the music. Silence is underrated
Music is life
Where to get? & how much, as a Senior women tired of getting ripped off 😖 Thx
Check your part number.
www.ebay.com/itm/2004-2009-TOYOTA-PRIUS-ABS-ANTI-LOCK-BRAKE-PUMP-ACTUATOR-ASSEMBLY-44510-47050-/185018258307?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Haha I have black electrical tape covering the tpms light on the dash. 😆
Thank you. How to bleed brakes on this prius?
Same as other cars
@@L8R-HPI heard there is special procedure to bleed brakes using computer ?
Great video! Where did you order your part?
eBay. Make sure you get the right part #
How did you bleed the brakes? :( im stuck at that part, GREAT video BTW I have the exact two codes
Giovanny I used a vacuum bleed from harbor freight that connects to an air compressor, it worked great, start from the far right rear wheel and then left rear then right front and then left front, with a scan tool it’s a faster process, but if you don’t have a scan tool to bleed brakes you may have to repeat the process a few times after a drive.
@@L8R-HP Perfect! Thank you. Do you think I can use a vaccum bleed AND a scan tool together for the procedure?
Giovanny yes sir
@@L8R-HP can I bleed it without the scan tool?
@@MrDesperatekid yes, I did it without scan tool and it works as well
How much was the part and where did it come from this is no longer available from Toyota ask me how I know
$350 eBay
is air bleed not important just after the replacement of abs module ?
Bleeding the brakes is a must after this job
At exactly 4:45 you can see where another bolt is missing from the cover as it is taken off. How the heck did you get to it??
It’s been a while, but I believe I used open box wrench ratchet.
@@L8R-HP Well, I got everything out and replaced the pump. I got it all back in but the same lights are still on, plus now I have the red triangle too. Also it won't reset or start the engine. Now what?...
@@rowyko check your orange fuse on the hybrid battery.
@@L8R-HP I'll check it out, thanks!
@@L8R-HP I really do appreciate you responding back to me. You are more real than most content creators in that regard. However, even though I did find out that I didn't have te orange fuse pushed down properly, after I fixed that, it still didn't work... Gonna keep trying though.
How were you able to confrm part number ? Without breaking down vehicles i just ordered one on ebay for $350
I could see the part number on there without removing anything.
Link?
Cool Video. Question: The clicking sound in back of the inverter area and the same sound at 1:11 in the video is that the sound of the pump going on and off? Did that sound continue the same way after you put in the rebuilt ABS Actuator? Is that a normal sound or does that mean it's going bad? ThanksI have the same sound but it goes on and off contently..but just doesn't stay on...
That sound is normal unless it comes on and off way too often, do you have any lights on the dash or codes?
In my prius 2007. I hear this sound only when I put foot on the brake pedal. The sound goes away when I release the brake. Is this normal?
The actual removal is missing
Did the codes went away right after you install the part or did you need a scan tool to erase the codes.
Those gloves are not going to protect you from an electric shock 😂
Guess they did. I’m still alive….
Did you notice the dog tag necklace thing dangling around the inverter.. def mad me nervous seeing that.... and yeah thos gloves would of provided no protection if the hybrid cables were live
@@josegarcia-c9e9d that’s why you disable the hybrid battery and the secondary battery before doing this. Rubber gloves did help. Any electrician would know that.
Unless of course i started licking the battery terminals and hooking them up to my nipples 😂. Maybe next time…
✌️
Did u have to do any sort of programming afterwards?
Hello again
Yes what type srcan tool or app you used on your prius.
I haven't hear from you about some stuff on your web page dude
Launch 431
Thank you for your video. My car has the same fault as yours. I refer to your video and bought a refurbished abs pump. But after I replaced it, when I did not perform bleeding, the fault codes C1256, C1253, And after opening the main driver's door, there was a continuous sound of high-pitched warning, which was very ear-piercing. This noise does not disappear. Does this mean that my newly bought abs pump is damaged, or is it because I did not perform bleeding? Now I may wait for the bleeding to see the effect, but I see that most people do not have any warning including my c1256 c1253 without bleeding, so I have little hope.
I am hesitating whether I need to purchase an abs pump replacement again, which makes me at a loss. Thank you for your help
Double check the hybrid battery fuse in the back. The orange one
@@L8R-HP But I can still start the car! It's just that there are still warnings c1256 c1253 And accompanied by a harsh high-pitched warning, this high-pitched warning has no display on the dashboard，So, I can’t determine what caused my replacement abs pump No execution bleed appeared The two alarm codes and the high-pitched continuous beep in the case of
@@gushilin if everything is plugged in and those codes won’t clear with a scan tool it’s possible that the new/rebuilt unit u got is faulty. It should be under warranty tho and they will ship you another
If u replace the pump you MUST bleed the brakes
When taking all the hoses out you flood the brake lines with air
Do you have to reprogram that new unit with the vehicle or is just plug and play ?
It was plug and play, just make sure the part number is exactly the same
No lights on the dash...I see some black tape covering a light.
Haha got em. Airbag light. Pass side seat needs calibrations. Not my car not my problem lol was helping someone out. Good catch tho 👍
Where can I order the refurbished brake actuator?
Please send me a message back
eBay is where I got mine. Make sure you get right part #
@@L8R-HP Ok thanks bud, I am looking around for one now! Was bleeding it a problem? I have a few scan tools that have bleeding capability!
Did you get the part number off of your old actuator before purchasing the one off of EBay? I just don’t want to order the wrong one. Thx!
Yes I did. You want the same part number so you don’t have to reprogram
@@L8R-HPhow’d you do that without ever removing??
I’ve ordered already, and pulling everything apart today…I guess we’ll see
Where did you buy the part?
eBay. Be sure you get the same part #
@@L8R-HPwhat is your part number? Curios which part of the number is consider to be part number and trying to get one from a 2005 replacing a 2009 and actuator, wonder if those will be compatible if the part number 44510-47050 match is good enough?…
Did the abs light come off right away or only after bleeding brakes? Thanks
After bleeding brakes. If your battery was disconnected thru the whole process, once you bleed the brakes and connect the battery you should be good to go.
Ok ...cool thanks !! I should have the battery connected when bleeding the brakes right so the abs pump kick in?
@@SouthPhxMexi first time I bleed the brakes I hand the battery disconnected. Second time I had the car running
Ok cool thank you! Appreciate it .
Finished bleeding today . Lights came off and warning tone stopped . Thanks again . Installed myself and saved $
What's that software called ? And can I download it on phone ?
Launch 431 mini
Where did you buy the refurbished part??
eBay. Make sure it’s the same part #
Can you still drive this car with this problem
Yea prob. Brakes still worked in my case. Just annoying lights on the dash
Yes, depending on where the failure is, it's usually the accumulator but when the ABS light is on, it usually means your ABS is OFF, which makes breaking in the rain or otherwise suddenly butt-puckering.
Worked on a 2008 and it gave c1256 and c1252 which I cannot find any info on. Anyone know what the c1252 along with c1256 would mean? Scanner says fix is to replace the ABS pump so not sure if it's nothing additional other than ABS pump
It didn’t help
I think because what your doing only you can see?
Total vision block.
Removing and installing parts, what’s so hard about that?
I only have Brake Light, ABS & the (!) light on but no VSC can it still be the pump bad?
Can you scan the car for codes? That’s the best way to start is scan it and google the codes. Could be an easy fix
@@L8R-HP it is P1391, what is crazy is I brought a new actuator pump the one you replaced and it still had the brake light and abs with the (!) on and my mechanic followed everything he was suppose to do and it still didn’t solve it? what can you think is the problem?
@@nochillfromtheo that is weird. Check all your connections. Maybe the new part is faulty? 🤷🏻♂️
@@L8R-HP I will check everything, do you think the brake fluid is bad I checked it and it has all black in the middle? Plus the cap to it was worn out so idk if air is getting in
@@nochillfromtheo replacing all brake fluid wouldn’t hurt. Just keep bleeding the brakes until fresh fluid comes out.
Cool, so basically the mos pita parts are not on video lol
That would be too easy
I just finished it and sheared the left top main bolt. FML. @@L8R-HP
What car reader is that?
Launch 431 mini
Would this fix C1357 as well?
Any chance I could get the part number off you? I just don't want to end up ordering the wrong thing. Thanks for the video btw
Best thing would be to get the part # of the one on your car. That way it’s the exact same part. Thanks for watching 😀
No I think there's an updated and changed sticker for the updated part I know on the gen 3 this is the case it may be the same on the two and this part for the two has been NLA for quite some time so I'm wondering where this guy got this part it should have been about $1,400 new
Those gloves aren’t going to protect you from electric shock.
Those gloves are for your protection, not mine 😂
What scanner do you use?
Launch
Did the actuator make that noise constantly before or at the same time the lights came on? Will the breaks work if the actuator fails?
Mine is making that noise every 10 seconds or so, I suspect a leak and the pump constantly starting in order to build back the pressure, but I don't have any lights on the dash yet.
Thanks!
Yea that’s how it started, it would make the noise more often than normal and then the lights would come on once in a while. After that the lights would stay on full time. Brakes still worked tho.
After fixing abs pump,what did u bleed first inverter coolent or Brake oil bleed ?thank for video
I poured the coolant in and bleed the Brakes, starting with right rear, left rear, right front and left front. After that I did the bleed again with a scan tool. I don’t think the scan tool made a difference, but I cleared codes and it was good to go
Only poured coolent, Haven’t u bleedid it?
@@chamidudesilva272 I just poured it in, it worked.
Listen, we are off on the wrong foot. I appreciate your video, just added a comment to get you a lot more subscribers. That's all. All the best.
What the price abs prius 2009?
Hi are you still able to drive the prius when the actuator failed? because my actuator is noisy and if it fails i want to place it in my garage to work on it. thanks
Jerome Donasco it was still drivable, just no ABS
Awesome man!!! Do you have the name of the place where you ordered the part? Thanks
I don’t. Sorry it’s been a while. It was on eBay for sure tho
Is there any torque spec for the orange wires connectors?
I didn’t find any specs. Sorry
@@L8R-HP How did you knew then how much was enough for the screw to stay in place? is the vehicle working fine to this day?
@@hedgehogthesonic3181 just have to feel by hand. Car is still running strong 💪
@@L8R-HP Good, i will know then when it is enough, thank you very much for answering. And good to know that the car is doing good, keep up the good content.
@@hedgehogthesonic3181 thank you!!! 😎
It would have been nice if you mention the smaller connectors on the back of the inverter, the two bolts on the backside of the inverter, the huge cast iron weight on the bottom of the abs bracket. Other than That, it’s a good video.
That would be too easy
Well I mention that because I was digging to get the bracket out and had I known it was there, I would have known the unit needed to go up first then out.
It’s not as easy as this video makes it to be
It’s not hard, just takes time
@@L8R-HP thanks for the video
Where did you get a rebuilt unit for 350
eBay motors
What was the avs unit cost?
Paid around $350 on eBay for refurbished. Worked great
Orange cables can kill you need special gloves.
That’s why you pull the orange fuse
Thanks for the video. I have to replace my ABS Actuator as well. Can you please advise where you purchased the refurbished part? Thank you in advance!!!
Paul Cubillos I got the part on eBay www.ebay.com/itm/184306684595
@@L8R-HP Thank you for the quick response. Did they by chance let you know how the part was refurbished and it the part still working good on your vehicle?
Paul Cubillos I didn’t ask, but the part looked brand new and once installed and bleed the brakes it works great, no programming required, make sure to match the part number
@@L8R-HP I have another hopefully quick question. How dod you bleed the brakes. Did you use a type of software? Thanks!!
Paul Cubillos I bleed them with a harbor freight bleed tool and used a launch scan tool as well. Don’t think it really made a difference with or without a scan tool tho.
Good Morning. Has your 09 pruis starting singing my pruis am talking about that FUCKING beeping when put the car in used it does every 15 seconds are 15 minutes like you driving big truck 🚚 & also it feel like the pruis does not have power or does not have breaks. For me to get STOP pruis I have slam on the break and you hear the back wheel squealing. After that I got power breaks again. You can't go fast if so put your head between your legs KISS your good bye 👋. Oh did you have to bleed all 4-wheels get the air out your break lines. I hope to get more information about on pruis ABS. I'm calling from Houston TX & my name Michael.
Yes you have to bleed all 4 brakes.
This is a crazy comment lol 😂
How do you Mach the part # before I order?
Joel Pinedo you can see the part number on your original. It’s hard to see while it’s on the car but possible.
What about with the vin #?
Joel Pinedo you could call the dealer with a vin# and they will tell you what part number it is
Which part number is the correct one there seems to be different part numbers?
worse car to every work on
I’ve had worse
Bleed the brakes no info, no video, worthless, sorry, just being real. Thanks anyway.
Robert Steag if you don’t know how to bleed the brakes I would have someone else do the job, just saying.
Why not just do a compete video? Thats why we are watching. Just saying..
Robert Steag I explain the bleed procedure in one of my other videos, it’s the same on all cars. No reason to do it in every video. Thanks for the tip tho.
You did a Prius brake bleed video??? Please leave a link. I would enjoy watching that.........
Robert Steag I didn’t do a Prius. But this guy has a video on Prius brake bleed. Hope it helps
th-cam.com/video/FKqxqgL2b4M/w-d-xo.html
Where did you buy the part?
eBay