very good tutorial but the first time I did it it didn't work but the second time it was perfect, so if anyone is wondering why it doesn't work, try doing it again
@@johnmichaeldelacruz2082 I think you need more propeller, be creative and find a centered space for an extra propeller to move you forward, just make sure it wont interfere with the seat.
I couldn't afford Roblox, so i tried it in real life too. Siren cars chased me, idk why. dont worry i escaped. btw 0 dollars is 89 cents in my country...
@@StarsOfficialAccount I will take the time sometime this week to build following the tutorial myself, to see if something has broke with updates or if its a skill issue.
@@StarsOfficialAccount hi, I tested building after my own tutorial, and it all works well. If you are having problems, please try to rewind the video, and make sure to just place half cylinder and not half cylinder 2
when i start the build it doesnt put the door in the right place it stays extended 1 block out (edit i fixed it it was because i missplaced some trapped doors)
Try using tnt locking instead then, Cause springs should work if they are set to "break weld". Or maybe it is that you need to give it a few seconds and then press ctrl
I have not had that problem myself so I dont really know how to fix it. Best thing to do is probably rebuild the door. Ans if that doesnt work, experiment with it a bit yourself
Hello. The keybind for the chair to extend should be set to E, and disconnector F. It could also be that the chair is stuck inside the van. In that case, you may have missed the part where you cylinders behind it. Or the fact I placed the propeller in the roof 1 block too far in the front causing the seat to lag.
@@jaydenhite8142 its a bit Hard, best suggestion I have is to just add more power to go faster and driftig wont be a very big problem, I hope to make better videos IF I continue
⚪ 🔴, sometimes it dorsnt work either. If you are on windows, press and hold windows key and then press . for emojis to open when texting. You can do it in roblox chat for it to work. (windows key) + (.)
You have missed some steps or got the controls wrong. Rewatch and you should find the problem. You can also add an extra propeller somewhere to make it move better.
Yes I am aware, but I can no longer edit the video. Thank you though, I will be better in the future if I continue. I have builds to create for you, but I lack time.
For me it is more than controllable, and I bet you could use some more propellors for down force if you wanted to. I will though not create a remake as its not really something you can do anything about at this scale sadly.
@Api51. Nice to hear! But I checked all of the settings, and it didn't work. I also checked where I put the blocks, and I was exactly how it looked in the video. It must be because of new updates of settings or something else, but I'll keep trying and I'll tell you :D
''you see it works very well''
*uncontrollable drifts*
very good tutorial but the first time I did it it didn't work but the second time it was perfect, so if anyone is wondering why it doesn't work, try doing it again
randomly found this and im not disappointed
Legend
whizifiy omg im a fan
yoooooo whizify love your vids
The disconnectors blocking seat are not standing at their positions pls help ASAP
The image : this is easy!😂
The tutorial : 💀
Ikr
great first video a good start to your channel
in case anybody can't find the circle things, here they are:
⚪⚪ 🔴🔴
10/10 absolutely amazing
Very nice video! Thanks for the tutorial.
This content so good I will recommend to my future wife!
as if you'd ever get one watching this content 💀💀
@@Mc_Skibidi then we're two.. 😔
lets get married instead@@cedric6941
Everything went well, but for some reason whenever I click the E or Q key, my van just turns left and right. How do I fix this?
If its too bad, use an anchor block to keep the van stable. Remember to enable physics
this is my friend!!!!
the door is not opening fully for me and i cant kidnap no one should i redo it???
@@1Rewindz yes
@@Api51. ok
There is a thing called coils and thickness what do i set those too?
@@Kennydacrashout I dont think they matter too much
how do you get the shapes on the front lights?
@@RandomClipsFromMe-mk8pt ⚪⚪🔴🔴
my problem:its not going forward. i followed what to place and it dosent go forward.
@@johnmichaeldelacruz2082 I think you need more propeller, be creative and find a centered space for an extra propeller to move you forward, just make sure it wont interfere with the seat.
why does the propeller that makes me go forward slows down when i go like 5 studs
very nice, made it in real life works just as well
AYO YO BRO THIS WAS FOR PLANE CRAZY
Jit tripping
ummm,
I couldn't afford Roblox, so i tried it in real life too. Siren cars chased me, idk why. dont worry i escaped. btw 0 dollars is 89 cents in my country...
they got me guys smh
its free@@BNe0
My seat won't go out, Im pretty sure it has to do with the Suspension. Because now theres things called Thickness and coils
Nvm i fixed it it was just that i had some wrong proproties on the coil. Great Van btw
@@Blukan2 thanks, I also noticed u have to disable free length
it wont move like its supposed to and the disconnectors for the door sticks out when i start it
Sorry but Im not to blame. You made a mistake then
Do we need to use signs or can we use text the whole time?
@@StarsOfficialAccount I think u can use text, but maybe not for the rear lights since they are extended
@@Api51. oh btw the car doesnt fricking work like the door goes out instead of in
@@StarsOfficialAccount I will take the time sometime this week to build following the tutorial myself, to see if something has broke with updates or if its a skill issue.
@@Api51. ok
@@StarsOfficialAccount hi, I tested building after my own tutorial, and it all works well. If you are having problems, please try to rewind the video, and make sure to just place half cylinder and not half cylinder 2
drake after seeing this video:😏
thanks i can now troll my friends
Yo i need help idk why when i press CNTRL everything is fine but it doesnt assemble nice like a wall is 1 block appart
1 month later still no answers
its the door
@@sirenacioI dont reply if I dont know the problem. I have not had this problem and I dont know what causes it.
when i start the build it doesnt put the door in the right place it stays extended 1 block out
(edit i fixed it it was because i missplaced some trapped doors)
how do u fix it
when i go forward like when i press W it functions the first some seconds and then doesnt ever function, pls help
Add a second propeller inside the top ceiling, just make sure to position it so it does not interract with the chair in the back
why when i press q and e my van just goes sideways instead of the chair going out and in
@@Patriot-101 The chair is stuck, try to find what is blocking it
shredder bugs bouta say gg
i did the tutorial exactly how you did it but the locking wont work whenever i press l ctrl it just doesnt go down
Try using tnt locking instead then, Cause springs should work if they are set to "break weld". Or maybe it is that you need to give it a few seconds and then press ctrl
i subbed
7:30 correction,he type half cynlinder2 but he click half cynlinder
thanks thats what i did wrong
this is the definition of trust the process 💀💀
Can you help me? i do everything great and when i click ctrl and want kidnap someone the door dont pop out + my car is so much slower than in vid
open the door and extend the arm before clicking ctrl
check your rear trapdoors especially the glass ones
I want you to do a tutorial about a flying van
Haha, I can try, maybe in a few weeks, busy atm unfortunately.
🔴🔴 for the lights⚪⚪
Thanks
It’s a nice build but I don’t know how to make the dots for the head lights
@@AmirinaPorsche Yes im aware its a pain, if u dont want to you can always try wing lights instead
i dont like motorlocks but for this one imma deal with them XD
Thanks you! i am Friend :D
6:50 saving
Thanks ❤
Please comment build suggestions
Drone From Interstellar
0:08 im the jet yo azi remember me im frik
Öh hi, now I remember yes
how did you color the signs?
i need help ASAP the disconnectors in front of the victims seat are in the wrong place. PLEASE HELP
i have problems with the door and the motor 2 for the door goes upside down
I have not had that problem myself so I dont really know how to fix it. Best thing to do is probably rebuild the door. Ans if that doesnt work, experiment with it a bit yourself
so where the door is check the 2 motors next to the back door check if they are powered
if then turn them lock and turn off power
@@og267gaming8 Thanks for answering for me.
check your rear trapdoors especially the glass ones
im having a problem when ever i drive my build it doesnt ssemble
@@TalhaTalukderJEMS Have you checked settings för motor and spring?
@@Api51. yes
why dose mine turn to the right when i try to drive straight?
@@I_am_asturgeon its weighted poorly, you could try use balast blocks in the left front of the van, it might work
@@Api51. Ah thx
when I take off the door doesn't stick and just disappears please help?
nvm fixed it, the 2 mothers had power not lock.
@@og267gaming8 Do you know why the seat doesont come out when i click e or q and doesnt eject like his when i click f
have not had that problem@@worldtree1269
@@worldtree1269 check your rear trapdoors especially the glass ones
Does it work on mobile devices ?
I would assume so since its the same game, but I havent played Roblox on phone before.
When i try to extend the chair it dosent work. But the disconnector is powered by keybind F. Can anyone help me pls?
Hello. The keybind for the chair to extend should be set to E, and disconnector F. It could also be that the chair is stuck inside the van. In that case, you may have missed the part where you cylinders behind it. Or the fact I placed the propeller in the roof 1 block too far in the front causing the seat to lag.
place cylinders*
@@Api51. ok thanks
my van keeps turning whenever i move how do i fix it
It will turn just a little since its not super stable. But if alot, you might want to check your propeller settings
ok that helped alot thank you😊
I kidnapped my cousin and now he’s trying to kill me 🤣🤣🤣
sir uhhh the motor lock keeps locking before i press crtl
You have probably placed the springs incorrectly then.
thanks for the tutorial but the van is very hard to control
how do I fix the drifting
@@jaydenhite8142 its a bit Hard, best suggestion I have is to just add more power to go faster and driftig wont be a very big problem, I hope to make better videos IF I continue
i cant wait to build this but i got to wait until 9 pm and i will get unbanned from roblox
Nice
Devious laughs
i did it all right but the door doesnt open and the chair wont extend
at the start you said half cylinder 2 but it was just cylinder 2
No, for the wheels it is half cylinder 2
@@Api51. your text _says_ it was half cylinder 2 but you used a half cylinder. simplified prob meant "half cylinder" and not "cylinder 2"
Everything works fine but the top of the van wont come down
@@Orange.MonkeVR make sure nothing is blocking it, meaning being attached to both top and bottom
I removed the back signs and the springs and it works fine now@@Api51.
how i put that text?
Go to the light bulb icon, click signs, then choose any text you want! (Text 1X1, Text 1X2, Text 1X3, Text 2X2, Text 3X3.)
Right when I finished, I just killed a man.
i cant go forward when im pressing w
The car keeps drifting right im having that problem
Perfect but I can go forward or backwards
Yes I am aware thats an issue, try adding another propeller somewhere on the bottom of the roof, cant remember where it fits rn however.
the door wont open and the van is not moving properly
@@bacilaflorin679 The moving part I am fully aware of, but check what is blocking The door and try to either replace or remove that block
For movement you can add another propeller centered
can you please put the light emojis or letters in the description
I will do it in a couple of days, I cant edit it right now. But here they are: ⚪ 🔴
mama im criminal
real
6:10
can someone help me i cant figure out the emote
⚪ 🔴, sometimes it dorsnt work either. If you are on windows, press and hold windows key and then press . for emojis to open when texting. You can do it in roblox chat for it to work.
(windows key) + (.)
Nice tutorial its just the dom van is kak bruh and i cant motorlock explain
5:31
Why my door is broken☠️☠️
wheres the circles of the lights
Just search up circle in emoji search bar
man it didn't work even after i tried remaking it 6 times.....
@@NoahBaza It might have broke after updates, could you tell me whats wrong?
my victims door keep falling of
@@Linyx-xo4pl I hear alot of people have problems, but I believe you missed the invisible sign on the back of it
💀
Makes kids take a nap
Love it but the moving is kinda weird
Agreed, I was lazy when making it
@@Api51. yh i tried to fix it
my van is good but the problem is its slow not fast
@@yuriecardiente4259 add more propeller
that isnt half cylinder 2
how ba a a a ad can i be?
terrible.
upload more vids
I can try, life got busy
cool
As a noob at the game this was pretty hard to follow and i gave up to
Yes I am aware it is a bit confusing with the motorlock making it possible to put blocks inside eachother.
It won't move and the door fell off
You have missed some steps or got the controls wrong. Rewatch and you should find the problem. You can also add an extra propeller somewhere to make it move better.
@@Api51. I tried and it didn't work
@@Thatrandomgamer857 Afraid I cannot help then. Sorry
this is funni
the door fell off
@@EthanChu-q6d Think you missed some piece, could be The text sign
@@Api51. ok i will try to retry thanks
i tried doing it again and it works thx
It wont assmble
check your rear trapdoors especially the glass ones
@@xai38-809 aight ima try thx
MY DOOR IS ONE BLOCK OUT I CANT FIGURE IT OUT OMFG
PLZ HELP
try settingn the motor to 65 drgrees max angle
check your rear trapdoors especially the glass ones
thx
Half Cylinder, not half cylinder 2 ur just making ppl make their build bad and make them mad, please correct it 🙏
Yes I am aware, but I can no longer edit the video. Thank you though, I will be better in the future if I continue. I have builds to create for you, but I lack time.
ok thx
Ahh friction it messed up so bad and i wasted my 10 minutes on dis dissapointment pls make a new version
For me it is more than controllable, and I bet you could use some more propellors for down force if you wanted to. I will though not create a remake as its not really something you can do anything about at this scale sadly.
can you please paste the two circles for the lights here?
⚪⚪
it doesn't work
solamente no funcionó, no se que hice mal 😔
😢
Mama Im A Criminal
doesn working
You built it wrong then
🔴🔴 here is the red circles
Didn't work :(
I tried building it a month ago and it worked, try again
@Api51. Nice to hear! But I checked all of the settings, and it didn't work. I also checked where I put the blocks, and I was exactly how it looked in the video. It must be because of new updates of settings or something else, but I'll keep trying and I'll tell you :D
@@RedDreadOfficial what part is not working then?
@Api51.The car keeps dropping down from the top of the car and it cannot join together to make a car
@@RedDreadOfficial Oh then check the motors on the side, you could even swap them with compressors
THIS DOESNT WORK
Elaborate.