Hi bro i have same issue after scan I received a p0507 code , do i have to replace the throttle body or something else, because i used of cleaner inside the throttle body but nothing got changed… can you please recommend??
It will need to be troubleshooted to find the issue. The basic things to do are to clean the throttle body, check for a vacuum leak, and check the PCV valve.
I done fix everything on my car & it stills idle. I have a code (crank shaft)popping up but I already fix dat too like a 2 weeks ago but every-time, I put the car in drive or just in park while the car is sitting it would just idle then shut off .
Yes, I need help. I can’t figure out what’s going on with my engine swap. I keep throwing a P0 507 code but the real issue maybe because I installed a 2008 where a 2006 used to be 2.5 and I have an extra wire connector that goes to my carbon collector but this new engine doesn’t have one and it’s running like shit and throwing PO 507 but I fixed it again and again
I’m also wondering the same. I’m no mechanic by any means, but P0507 is the only code I have on my 2010 Jeep Grand Cherokee, and I don’t notice any symptoms, in fact - my idling is perfect. I have noticed slower shifting though when I’m accelerating, though. And my Eco mode doesn’t work… on the rare day my check engine light doesn’t illuminate, my Eco mode starts working.
The throttle body likely needs what is called a Relearn procedure. It can vary on the engine how the Relearn is done. Often, the computer will relearn on its own when driving around. Also, check for any wires that may have become disconnected.
@@HVAC_MechanicI did the relearn procedure, still the same issue. Bought new throttle bodies. Still the same issue and code. What’s my next step my man I’m lost rn
@@VqLyfe I bought the icon T8 scanner. It just needs to be reset with a scanner. Your throttle body is fine. Just needs a bit-directional scanner to reset it.
Can altitude affect this? I just bought a supercharged mustang that was completely fine and then I brought it up to 7000ft and now it's idling high. Any suggestions?
Air control valve, found on your 3 cylinder rogues ... your throttle body is under that charge air cooler. Your not the only nissan tech out there ... be humble.
Cool, just the information I needed. Doing the drive cycle and clear all the monitors then cel light goes on.
I love this video very informative and leaves pictures at the end which I screen shot as well as took notes ...
Great video, straight to the point. Nothing but info. Thank you
Thank you for this video!
Great and brief educational video tnx
hey i have this code on my truck but is one of the problems were i go on the highway and im pushing full throttle and it only want to do about 85mph ?
Great video. Thanks so much for. Putting the crap and getting to the point.
Great video, thanks. I've been chasing this on my 1999 Savana and was in need of some new ideas.
This is the best video 💪🏼💪🏼💪🏼
I love this video ? Is performed all the test found 1 air leak but the code is still their what else can I do help
Hello gd afternoon,if the thermostat is removed can that cause high idol??
Hi bro i have same issue after scan I received a p0507 code , do i have to replace the throttle body or something else, because i used of cleaner inside the throttle body but nothing got changed… can you please recommend??
It will need to be troubleshooted to find the issue. The basic things to do are to clean the throttle body, check for a vacuum leak, and check the PCV valve.
I done fix everything on my car & it stills idle. I have a code (crank shaft)popping up but I already fix dat too like a 2 weeks ago but every-time, I put the car in drive or just in park while the car is sitting it would just idle then shut off .
Could a catalytic clog cause backup poor idling even after cleaning throttle body
A clogged CAT can cause issues. When it is clogged up, the engine won't have the power it once did.
Yes, I need help. I can’t figure out what’s going on with my engine swap. I keep throwing a P0 507 code but the real issue maybe because I installed a 2008 where a 2006 used to be 2.5 and I have an extra wire connector that goes to my carbon collector but this new engine doesn’t have one and it’s running like shit and throwing PO 507 but I fixed it again and again
Did you figure out why? Have the same problem
Part numbers for 3.8??? 2016 ultimate
Could this cause shifting problems?
I’m also wondering the same. I’m no mechanic by any means, but P0507 is the only code I have on my 2010 Jeep Grand Cherokee, and I don’t notice any symptoms, in fact - my idling is perfect. I have noticed slower shifting though when I’m accelerating, though. And my Eco mode doesn’t work… on the rare day my check engine light doesn’t illuminate, my Eco mode starts working.
How did u solve this problem
Yes the computer tells your transmission is higher and it will kick shift
Mine shifts quickly but i do have a few other codes along with this which is related to vacuum leaks
I got this code after cleaning the throttle body and maf sensor 😢
I got this yesterday after cleaning throttle body too!! How do I fix it lol
The throttle body likely needs what is called a Relearn procedure. It can vary on the engine how the Relearn is done. Often, the computer will relearn on its own when driving around. Also, check for any wires that may have become disconnected.
Me too! Idk what to do
@@HVAC_MechanicI did the relearn procedure, still the same issue. Bought new throttle bodies. Still the same issue and code. What’s my next step my man I’m lost rn
@@VqLyfe I bought the icon T8 scanner. It just needs to be reset with a scanner. Your throttle body is fine. Just needs a bit-directional scanner to reset it.
Can altitude affect this? I just bought a supercharged mustang that was completely fine and then I brought it up to 7000ft and now it's idling high. Any suggestions?
Air control valve, found on your 3 cylinder rogues ... your throttle body is under that charge air cooler. Your not the only nissan tech out there ... be humble.