Nice! Took about one minute each - I bought a two pack and replaced both main headlamp bulbs and put the one good one in the glove box as a spare. Toyotas are generally easier to work on for the minor stuff i.e. you don't have to disassemble half the car to replace a bulb. Pro-tip: always check TH-cam first off; it'll save you time. Thanks Jason!
Just what I needed to know. Thanks for posting.. 12.99. Bulb. 42 in labor to change it at the shop. I bought bulbs and changed the bulb in less than than to minutes. Thank you.
Wow--that was so helpful!! Thanks for explaining things so simply. Without your tutorial I never would have believed this could have been so easy. Much appreciated.
I'm so happy I found this. I just noticed the light on my Camry was out. So I'm going to give it a shot this weekend. I'll be back to review this if anything.
Thank you i did what you instructed and my bulb actually turned on didnt have to install a new one at all !!! But now I know how to change one !!! Thank you
Thanks so much for posting this video-one of my lights went out a few hours before this post no doubt from all the rain fall and your video helped me greatly-thanks!!!!!
Omg I’m so happy I found this video. My passenger headlight is out. It’s hard to see at night with one light on. Rain 🌧 season around the corner so going to try and change it. Thank you so much !!!😃
Thanks Jason. i was concerned that the clip on the female end was somehow jammed or seized and was about to strong arm it with a pair of vice grips. I tried again, after watching your video, and likely saved myself a bigger issue and repair bill. Two thumbs up chum
Hey thanks for the detailed video. I thought is was going to be all involved like have to take to dealer or mechanic. Wow super easy. Someone commented about price of bulbs mine were 45.00 for two
To no surprise I can believe how many people didn't know how to do this, myself included. My headlight went out last night and I had to drive home with my brights on until I could get the bulb. Tell me why i felt like such a boss bit*# when i successfully changed it just now at the gas station w/the help of your video 😅❤ all these dude walking up to me asking if i needed any help and me respectfully declining like i could do this in my sleep. Thats some real deal woman empowerment. 😂
leaving fingerprints on the bulb will shorten their life by quite a bit. You should be very careful to not leave a fingerprint on the glass of the bulb.
Thank u I just changed my light with this video. It's quick, straight to the point n shows demonstration. Great video thank u for ur help! Ur awesome!😉
Thanks for the cool instructions, didn't realize it was so similar to changing the light bulb in my old 98 VW Jetta (which I had to do so many times when I had it)
Does anyone know about 2008 Camry GL models. It’s Australian specs and have different headliight bulbs than other camry of similar model. It uses H7 instead of H11 for low beam and there is no headlight adjustment screw aswell. There is no guide i can find on internet which makes things hard to figure out.
Nice thing would be to mention that the headlight has three prongs or tabs that you have to fit in there and that one of the tabs is larger than the other and has to match to the larger hole. But otherwise good video thanks
Would it be possible to disconnect the cable from the bulb first then pull out the old bulb and replace it with a new one. I tried replacing the bulbs l last weekend and due to very little slack removing the bulb on the passenger side seems difficult
Actually I found the directions to unclip the old bulb to be incorrect for my 2010 Camry. I needed to insert a screw driver to push that piece out to release he bulb. Also be sure to pull the seal out of the housing if it doesn't come out with the bulb.
The only other advice I would give is, wear some nitrile gloves when touching the new bulbs so as not to get any fingerprints on the glass. It shortens the life of the bulb.
I cant believe Toyota service wanted 70$AUD for this...including light price which was 28$AUD only. So fitting cost 42$AUD. I told them I will just buy the bulb. Thanks.
High beam is closer to the center, low beam is closer to the edge. So... high beam closer to the Toyota symbol and low beam closer to the car door, if that makes sense.
Thanx for the video but my Camry set up is totally different. the bulb is fixed in place by a wire clip and its all covered by a large rubber anti-dust boot.
Greetings. I think it’s a 2005 (don’t have original documents). It’s a 2,362litre petrol engine. It is exactly like the Toyota Camry 2005-2006 Headlamp Headlight Assembly except the Turning Indicator light (TIl) and the Park Light are swopped around. So the TIl is on the extreme inside and the Park Light is on the extreme outside of the assembly. So from the outside to inside the arrangement is: 1. Parking light 2. Low and High beam combo 3. High beam solo 4. Turning indicator The High beam solo (3) bulb looks just like the one in your video. However the Low+High beam bulb (2) ends with 3 protruding pins that go through a hole in the large rubber dust cover boot into the connector of the wiring harness. That bulb is held in place by only a wire clip.
8 years and you are still ticking. You are the GOAT!
Thanks @chickencare1018!
7 years and still helping! Thank you
You're welcome!
Your tutorial is still relevant even after five years. You helped me a great deal. Thanks, Jason!!!
SImplest video on TH-cam on how to change the Camry bulbs. Thank you so much! Wish you good fortune in your life!
Wow... Thanks Chuck. I'm honored.
Nice! Took about one minute each - I bought a two pack and replaced both main headlamp bulbs and put the one good one in the glove box as a spare. Toyotas are generally easier to work on for the minor stuff i.e. you don't have to disassemble half the car to replace a bulb. Pro-tip: always check TH-cam first off; it'll save you time. Thanks Jason!
Just what I needed to know. Thanks for posting.. 12.99. Bulb. 42 in labor to change it at the shop. I bought bulbs and changed the bulb in less than than to minutes. Thank you.
Thanks for the video! This looks fairly simple, but I'm impressed you did it mostly one-handed lol
You rock! I knew Toyota wouldn’t make you take the entire bumper off like other videos say.
Glad I could help! I thought the same thing... That's why I made this video.
Thks for making a very simple vid for a task I thought was soooooo complicated.
Sorry Sir,Not dangerous if we do not remove the batteries?
Youre a lifesaver, couldn't afford to be waiting on a repair job in the middle of the recent storms
My only regret is that you don't have 6M views so you can get some ad revenue for such a great video. Thank you!
Wow--that was so helpful!! Thanks for explaining things so simply. Without your tutorial I never would have believed this could have been so easy. Much appreciated.
I'm so happy I found this. I just noticed the light on my Camry was out. So I'm going to give it a shot this weekend. I'll be back to review this if anything.
Thank you i did what you instructed and my bulb actually turned on didnt have to install a new one at all !!! But now I know how to change one !!! Thank you
Youz is a great mechanic, videographer and explainer.
Thank You. I purchased 2 bulbs thru your link.
Awesome! Glad this helped you out! Thanks for the support
Thank you sir for the video ! 🙏
You're welcome!
Thanks so much for posting this video-one of my lights went out a few hours before this post no doubt from all the rain fall and your video helped me greatly-thanks!!!!!
You're welcome, Macross! Thanks for the comment
Omg I’m so happy I found this video. My passenger headlight is out. It’s hard to see at night with one light on. Rain 🌧 season around the corner so going to try and change it. Thank you so much !!!😃
Good luck! Let me know if you have any questions
You sir represent the best of TH-cam. Your video didn’t have a lot of unnecessarily rambling ass straight to the point in under five minutes.
Thanks Marc. That's my goal. Appreciate the feedback
Thanks Jason. i was concerned that the clip on the female end was somehow jammed or seized and was about to strong arm it with a pair of vice grips. I tried again, after watching your video, and likely saved myself a bigger issue and repair bill. Two thumbs up chum
Thanks Kevin. Glad this helped!
Your video was the most helpful by far best I seen thank you
Hey thanks for the detailed video. I thought is was going to be all involved like have to take to dealer or mechanic. Wow super easy. Someone commented about price of bulbs mine were 45.00 for two
Hey Jason! Thank you for posting this video. It helped me a lot when trying to change my head light.
To no surprise I can believe how many people didn't know how to do this, myself included. My headlight went out last night and I had to drive home with my brights on until I could get the bulb. Tell me why i felt like such a boss bit*# when i successfully changed it just now at the gas station w/the help of your video 😅❤ all these dude walking up to me asking if i needed any help and me respectfully declining like i could do this in my sleep. Thats some real deal woman empowerment. 😂
I love this. Thanks for sharing! Happy to be empowering you and other women :)
Excellent video I appreciate the arrows 👍
Great review! Entirely clear and straight to the point. Thank you for the help. :)
Thank you very much. The clip always gives me problems. You explained it clearly.
leaving fingerprints on the bulb will shorten their life by quite a bit. You should be very careful to not leave a fingerprint on the glass of the bulb.
It's ok to touch them if you use some rubbing alcohol afterwards to clean the oils off the bulb
Thank you for this piece of important information
Thank you so much! Great tutorial! Keep up the Great work and Stay safe out here.
Thank u I just changed my light with this video. It's quick, straight to the point n shows demonstration. Great video thank u for ur help! Ur awesome!😉
Thanks, Mae! I appreciate the feedback. I'm glad you helped you out!
Thank you very much for the great video. I thought it was going to be more difficult than this. Great instruction!
What a great video, great walk through the entire process. Hope you got more content !
Great video; I saved $45.00 and I am not a fixit type guy.
Thanks for the video. You made it very easy to change the bulb.
Thanks for the cool instructions, didn't realize it was so similar to changing the light bulb in my old 98 VW Jetta (which I had to do so many times when I had it)
Awesome vid-----thanks for the no nonsense instruction
great video, teen driver here and looking to save on maintenance. very clear instructions and very helpful! god bless you!
best video with close up for camry model thanks
Changed my bulb in two minutes, thanks
Great NO BS video - Thanks
Thank you brother. You made this very simple.
Thanks man! Great simple video.
Thank you so much!!..I did it myself...Merry Christmas🎄
Thank you! That was so quick and easy! Appreciate it
Awesome instructions, thanks!
I just changed mine right now thank you so much 😊
super easy to follow. thanks a bunch!
Iam a woman too, first time ever! Yeah, thank you, thank you!!!!!!!!
Way to go! You're welcome
Thank you, GOD BLESS YOU!
My headlights are really dim but the bright lights are wonderful, do you think the regular headlights need to be changed out they do work but very dim
Jason Foote thank you
You always have them stupid people that wanna dislike. This guy explains everything fine.
I'm gonna have to attempt this today. I've never done it before. I'm not technologically advanced. Hoping this goes well
@@JasonsHonestReviews thank you so much.
Great video, thank you very much for your help.
You're welcome!
It worked! Thank you!
You're welcome!
Great tutorial , thank you
You're welcome!
Very helpful.... I saved the manual fee
You are so helpful 👍🏾
Hi Jason, could you confirm if this video is for high beam globe and not low beam?
Actually it was less than 4 minutes.....thank you!
Thanks so much for this! It was a snap!
Thank so much now i know how to change my headlights
Very helpful, thanks!
What if after holding that clip down, the bulb does not pull out, regardless of how hard you pull? That's the problem I'm having.
Thanks, this helped great
Thank you sir more dealing with some crooked mechanics.
Thank you 🙏
I made it 💪
Wow, which camera are you using?
Helpful video.thanks
thanks brother simple!!
Will this video was uploaded several years ago, but if you see this, thank you for the up loading the video.
You're very welcome!
Is it possible to know what the brand of the original headlight bulb is? As in the bulb as it came with the Toyota Camry? Thanks!
If a car moron like me can do this, ANYONE can! Thanks for saving me some bucks!
Does anyone know about 2008 Camry GL models. It’s Australian specs and have different headliight bulbs than other camry of similar model. It uses H7 instead of H11 for low beam and there is no headlight adjustment screw aswell. There is no guide i can find on internet which makes things hard to figure out.
Don't know, sorry! Good luck!
F... My headlights just went out... Or I adt least just noticed it... Gonna change it today. Thank you sir!!
Did you ever change it?
Nice thing would be to mention that the headlight has three prongs or tabs that you have to fit in there and that one of the tabs is larger than the other and has to match to the larger hole. But otherwise good video thanks
if i change the low beam for another led bulb.. the light it gonna be more intence than high beam..?
I changed my high beam and inserted the new light bulb made sure I heard the click.. it's still not working. Any advice?
How much do new bulbs cost? Like an estimate for a decent halogen.
great work thank you so much
Any recommended LEDs?
Very informative
Was the first example the bright headlight?
I believe so
Super explanation
Thank you, Dr!
I had trouble unclipping it as shown at 01:35...A mechanic had to pull it out... Still not clear on how to pull it out. :-(
Would it be possible to disconnect the cable from the bulb first then pull out the old bulb and replace it with a new one. I tried replacing the bulbs l last weekend and due to very little slack removing the bulb on the passenger side seems difficult
Thanks...I'll give it a shot
Thank you, that worked for me.
Actually I found the directions to unclip the old bulb to be incorrect for my 2010 Camry. I needed to insert a screw driver to push that piece out to release he bulb. Also be sure to pull the seal out of the housing if it doesn't come out with the bulb.
Very useful video; thank you!
Thank You so much...
You're welcome!
Thank you so much
You're welcome!
The only other advice I would give is, wear some nitrile gloves when touching the new bulbs so as not to get any fingerprints on the glass. It shortens the life of the bulb.
I cant believe Toyota service wanted 70$AUD for this...including light price which was 28$AUD only. So fitting cost 42$AUD. I told them I will just buy the bulb. Thanks.
Thanks Jason
Which one is low beam and high beam
High beam is closer to the center, low beam is closer to the edge.
So... high beam closer to the Toyota symbol and low beam closer to the car door, if that makes sense.
Thanks Dad
You're welcome, son
Thanx for the video but my Camry set up is totally different. the bulb is fixed in place by a wire clip and its all covered by a large rubber anti-dust boot.
Greetings. I think it’s a 2005 (don’t have original documents). It’s a 2,362litre petrol engine. It is exactly like the Toyota Camry 2005-2006 Headlamp Headlight Assembly except the Turning Indicator light (TIl) and the Park Light are swopped around. So the TIl is on the extreme inside and the Park Light is on the extreme outside of the assembly.
So from the outside to inside the arrangement is:
1. Parking light
2. Low and High beam combo
3. High beam solo
4. Turning indicator
The High beam solo (3) bulb looks just like the one in your video.
However the Low+High beam bulb (2) ends with 3 protruding pins that go through a hole in the large rubber dust cover boot into the connector of the wiring harness.
That bulb is held in place by only a wire clip.
You forgot to mention that you should not touch the build with your fingers, because this will shorten the life of the bulb...🙂
No worries, still gave you a 👍🏼
On account that it did give me the information I was searching for. ☮️
thanks great video
Thank you.