Thank you for your enquiry, The preparation of patio in the video above consisted of power washing down with a high powered pressure washer to remove dirt, dust, and any contamination that may have been present. In this instance the patio was in sound solid condition with no movement of lifting of the existing slabs. Neither was laying water am issue so no bore holes were needed to be drilled. The area was them primed with SUDwell Primer and allowed to cure. Mixing of the kits was undertaken by the use of a powerful mortar drill, and the kits were laid as seen in the video. In some circumstances, if standing water is an issue, it would be recommended that a dozen or so bore holes are drilled into the substrate that you are applying the kits to.
Hi i have a similar old looking patio that i think will greatly benefit from covering with your product, can you firstly tell me if the sudwell resin bound kits come in just this color ? and secondly where can i purchase them, also my Patio is 62 m2 and if i do my path as well the total area will be 92 m2...is there any discount offered for this quantity. Thanks in advance David.
Hi David, Thank you for taking the time to view our video. Our DIY kits are available in a variety of colours that can be seen here www.theresinbondedslabcompany.co.uk/diy-resin-driveway-kits. Currently we are offering a 10% discount on our kits with additional discounts applied for larger orders. Please check out our website and if you have any further queries please feel free to give us a call.
Without using a rebar framework this will most likely crack either from mechanical loading or expansion and contraction from temperature seasonal changes.
Maybe not because the resin acts like a compression/expansion joint between each stone. I would think it might chip out over time, though. Stones come loose, chip out.
I recieved my kits on Friday I really enjoyed doing the path the only problem I had was with the 1st kid I couldn’t mix it probably so the 2nd kit I split it in 2 and it was so much better
@@freshairOutdoors it’s fine I do get the odd weed from time to time but I just pressure wash it and it ok best thing I put down if I get 5 more years out of it I’ll replace it with the same
Jonty jt no it does not, resin bound is permeable so the water would sit under the resin and eventually blow. And as for using in rain 🤔 , damn sure I would not lay any polyurethane system in the rain.
How do you prepare the area so you it is 15mm below the border (if isn't already)? If you have a crazy patio area that you want to cover that is flush with surrounding brickwork what can you do to create a 15mm drop? Taking out the crazy patio (a lot of work) would leave a drop of over 30mm. So, what...? Put twice as much gravel/resin in?
When laid to the correct specifications, how long is this guaranteed to last? I’ve seen other similar materials guaranteed for only 10 years. In my mind, 10 years is not that long.
Jakbyś dał radę skontaktować się ze mną przez Messenger , bo jestem ciekawy jak przygotowales powierzchnię , a ja podeślę foty jak to u mnie wygląda , to byśmy wymienili wiedzę co i jak . Jak coś to te same dane na fejsie . Robię teraz jako groundworker , ale nie kładłem jeszcze żywicy ,
Yes, Many of our kits are sold for use as a driveway. So long as you install the kits at a depth of at least 18mm onto a solid base, our DIY kits will be perfect for the job.
James Backler Resin Bound screed should always be made using Polyurethane Resin; this is due to its flexibility compared to Epoxy, which makes it considerably better suited for use as a permeable, external surface that has to deal with harsh weather throughout the year. We've been manufacturing, supplying and installing our own Resin Bound systems for many years.
we produce the polyurethane resin glue (AB) for resin bound driveway polyurethane resin glue factory in China , with good price whatsapp 0086 13505260570
what preparation was done to the old crazy paved steps and patio areas before the new resin was layed on top???
Thank you for your enquiry, The preparation of patio in the video above consisted of power washing down with a high powered pressure washer to remove dirt, dust, and any contamination that may have been present. In this instance the patio was in sound solid condition with no movement of lifting of the existing slabs. Neither was laying water am issue so no bore holes were needed to be drilled. The area was them primed with SUDwell Primer and allowed to cure. Mixing of the kits was undertaken by the use of a powerful mortar drill, and the kits were laid as seen in the video.
In some circumstances, if standing water is an issue, it would be recommended that a dozen or so bore holes are drilled into the substrate that you are applying the kits to.
Hi i have a similar old looking patio that i think will greatly benefit from covering with your product, can you firstly tell me if the sudwell resin bound kits come in just this color ? and secondly where can i purchase them, also my Patio is 62 m2 and if i do my path as well the total area will be 92 m2...is there any discount offered for this quantity.
Thanks in advance
David.
Hi David,
Thank you for taking the time to view our video. Our DIY kits are available in a variety of colours that can be seen here www.theresinbondedslabcompany.co.uk/diy-resin-driveway-kits.
Currently we are offering a 10% discount on our kits with additional discounts applied for larger orders.
Please check out our website and if you have any further queries please feel free to give us a call.
did you fill in the spaces with something? the spaces and cracks seem to have dissapeared..thanks
What about applications over cracks
How much for 15 kits del-boy?
Can this go on to block paving, does the block paving need weed killing first and can it take cars being parked/driven on it
That looks amazing, might test drive this on our small patio...
As you said it’s not hard when all you are doing is talking 😀😀😀
Is this same material as epoxy resin or is it different then that
Without using a rebar framework this will most likely crack either from mechanical loading or expansion and contraction from temperature seasonal changes.
What’s a rebar framework mate ? Concrete edge of some kind ? I’m only a diy guy thanks
Maybe not because the resin acts like a compression/expansion joint between each stone. I would think it might chip out over time, though. Stones come loose, chip out.
I’d like to see what this patio looks like after a winter. Does it still look this good!
Just had my patio resin bonded very bright but looks great quite expensive but worth it guardian home developments did it
Lynne Walmsley what sort of price per metre
How has it lasted?
I recieved my kits on Friday I really enjoyed doing the path the only problem I had was with the 1st kid I couldn’t mix it probably so the 2nd kit I split it in 2 and it was so much better
how has it held up over the years?
@@freshairOutdoors it’s fine I do get the odd weed from time to time but I just pressure wash it and it ok best thing I put down if I get 5 more years out of it I’ll replace it with the same
If I was to lay this on our existing concrete path where would the water go? And in the winter would it freeze and blow?
Install channel drainage to ends of falls
This was really helpful. Thank you!
How much is it per kit?
How much for one kit.
How much did the Non Discript Eastern Europion help cost, just asking for a freind?
Non descript Eastern European here. I Know your grammar better than you already!
Oh nikita is it cold?
At what thickness? The film glitched just as you say 1 sqm@ ????
How much per kit please
Im going to lay a 1mtr wide concrete path to our front door, I want to cover it with resin so how thick does this need to be laid on top?
Each kit will cover 1m², this will come out approx 15mm
so if it's permeable , why lay it on a non permeable base , you raised the steps with brickwork,no for the water to escape ?
Darren Watters the resin hardens and becomes water tight.
Jonty jt no it does not, resin bound is permeable so the water would sit under the resin and eventually blow. And as for using in rain 🤔 , damn sure I would not lay any polyurethane system in the rain.
Is this porous? What's the difference between 'resin bound' and 'resin bonded'?
How long do you have to work it once a bucket full is mixed to get it laid ? Looks good stuff 👍
Once mixed you have around 30 mins working time with SUDwell All-Weather Resin or around 15 mins with standard resin.
@@ResinBoundPavinghi do you have the link for the website?
Just put it into your internet machine ! Lol
I would like to use this for a garden path. Can this be laid directly onto earth or does it need a concrete base?
You would need a concrete or tarmac base, you lay that on dirt its just gonna go wrong.
I think you would need some dolomite down and a pin kerb edging
My parents have quite a big patio where the slabs have become very loose and are raised. Can you just pour this on the top and make it smooth?
whats the website called to have a look at the different types of Resin please
reeve1able co owe t g
How do you prepare the area so you it is 15mm below the border (if isn't already)? If you have a crazy patio area that you want to cover that is flush with surrounding brickwork what can you do to create a 15mm drop? Taking out the crazy patio (a lot of work) would leave a drop of over 30mm. So, what...? Put twice as much gravel/resin in?
“Half an hour since I last spoke to you and 10 kits later” you know that’s just 3 minutes per bucket right? Is that labourer a cyborg or something?
he states its not expensive but it is, roughly 85 quid a square metre ,so a lot more expensive than paving
I have block paving down with weeds coming through, will it need weed killing first and can your product take cars driving on it?
dosent answer these kids of questions that tells me not to yse his product
Looks like a fantastic job 👍👍👍👍
Except that it’s not that easy and cannot be done in minutes. That’s a couple days work there, with a lot of preparation 🤪
If you are well prepared, with 1 person mixing and 1 person floating this size can be done easily in a day or less
Do you have to have a certain type of base before putting down the resin .? Can it be put down over compact soil with some kind of membrane ?
😂 Pay someone to do the job is my advice
When laid to the correct specifications, how long is this guaranteed to last? I’ve seen other similar materials guaranteed for only 10 years.
In my mind, 10 years is not that long.
where on your website I can calculate how many kits do I need ?
Witaj , robiłeś może tym systemem już u siebie? Zamierzam się za ten resin albo indian stone . Krystian Blackpool , Pozdrawiam 💪
@@krystiangruszczynski4555 hej. Dopiero będę to robił. Właśnie udało mi się przygotować powierzchnię. Na dniach zamawiam towar i będę kładł.
Jakbyś dał radę skontaktować się ze mną przez Messenger , bo jestem ciekawy jak przygotowales powierzchnię , a ja podeślę foty jak to u mnie wygląda , to byśmy wymienili wiedzę co i jak . Jak coś to te same dane na fejsie . Robię teraz jako groundworker , ale nie kładłem jeszcze żywicy ,
How long do you have to get it down once the buckets is mixed ? Looks good job 👍
Once mixed you have around 30 mins working time with SUDwell All-Weather Resin or around 15 mins with standard resin.
Does sea gul 💩 wash off this type of resin floor easily?
You absolute star!
Can it handle cars parking on it for a front driveway?
Yes, Many of our kits are sold for use as a driveway. So long as you install the kits at a depth of at least 18mm onto a solid base, our DIY kits will be perfect for the job.
Can it be laid between wooden frame ie
Sleepers ?
Epoxy or Polyurethane Resin buddy?
both epoxy and polyurethane resin is ok
James Backler Resin Bound screed should always be made using Polyurethane Resin; this is due to its flexibility compared to Epoxy, which makes it considerably better suited for use as a permeable, external surface that has to deal with harsh weather throughout the year.
We've been manufacturing, supplying and installing our own Resin Bound systems for many years.
we produce the polyurethane resin glue (AB) for resin bound driveway polyurethane resin glue factory in China , with good price whatsapp 0086 13505260570
Mmm, China! I wonder what the quality of that resin will be?
Didn't think you could lay resin on paving bricks and slabs thought it had to be on concrete or tarmac🤔
You don’t need a kit for this , resin and sand and grit .
New gloves for the shoot..
its not hard not hard i dont own a polack
The guy in the pink shirt is about as useful as a chocolate fireguard
What’s the maximum depth you can apply onto a concrete floor plz mate ?
What thickness of the resin is reguired
12-18mm depending on usage