You might try covering a piece of ply or partical with contact paper to see if it does what tape does for saw cuts. If that doesn't work, a bit of thinned poly or even shellac could be a game changer.
Hmm, not sure if I have this, but perhaps below will help you? In Fusion under the post processing tab, you click on the three dots to open the post library. In there you can search for grbl to find it. I used that post processor.
Yes, this should be possible, have seen more people do this. You would need to have the correct brackets to mount the router, and it would no longer be controlled via the software. There's also an upgraded spindle available from Two Trees if you want.
Nice video i wanna dive deeper in milling myself, do you know if there are limitations in the personal Fusion license with regard to the generation of NC Files?
Yes, there are some limitations to the free version, but this it not an issue for me though. You can refer to below link: help.autodesk.com/view/fusion360/ENU/?caas=caas/sfdcarticles/sfdcarticles/Fusion-360-Free-License-Changes.html Hope this helps.
Gaaf Jeroen! Ikzelf overweeg om de TTC 450 Pro met een 500w spindel te kopen. Mijn doel is om uit aluminium injectie mallen te maken (vis aas). Wat Denk jij? zou die daar geschikt voor zijn?
Ik denk eerlijk gezegd dat de machine voor aluminium wat aan de lichte kant is, maar met de 500W spindle en een vrij lage feedrate lukt het misschien wel. Ik zou zeker ook nog even wat andere video's bekijken.. succes!
Nee, ik bedoel meer de geleiding zoals de v-wheels. Eigenlijk zou je op de assen dan lineaire lagers willen hebben, net als kogelomloopspindels, maar dan praat je uiteraard ook over een machine uit een heel andere prijsklasse. Begrijp me niet verkeerd, de TTC-450 is zeker voor wat deze kost een erg leuke machine, maar ik heb gemerkt dat er wel wat speling zit op de z-as assembly aan de x-as.
@@jewijk Oke, heeft u de standaard of de Pro variant? 😀 wat ik begrepen heb, zou de Pro variant in ieder geval een deel van die punten verbeterd hebben dacht ik? 🤔 Maar dat zijn goeie punten om naar te kijken. Nu ben ik niet op snelheid georiënteerd, dat scheelt dan wel weer denk ik🤔🤔 hmmm lastig lastig... keuzes haha
Thanks for watching. I do not own this one myself, but from what I read, the difference would be following: Easily expandable with several stronger spindles and an optional 20W Laser Module (TC20). Support for an additional Rotary module For 90% pre-assembled, so quickly operational! Switch from CNC to the optional Laser module with 1 click Stronger drive motors and improved limit switches
Ok, yes it's safe. I have received many shipments via Geekbuying and they are a solid company. Of course you can always ask around if you want, but I am in direct contact with them and have good experience with them.
Olá Jeroen. estou querendo comprar uma TTC450 e estou super em dúvidas em relação onde comprar com o menor preço e com entrega verdadeira. Voce poderia me ajudar?
Hello, Thanks for watching, I received mine from Geekbuying and have very good experience with them. They are a reliable company, at least in my experience. If your interested in purchasing from them, let me know as I'm an affiliate with them and can always see if I can arrange a nice discount for you. Herewith my affiliate link to the standard version if you would like to check it out. www.geekbuying.com/go/9FGuzlmr If you have more questions, perhaps it's good to also connect with me via my Instagram account so you can send me a direct message. Hope this helps. Kind regards, Jeroen
Ok amigo, confio nos seus cabelos brancos...fiz o pedido e cheguei até o momento de realizar o pagamento, então eles disseram que não enviam para minha cidade e cancelaram o pedido., infelizmente. De qualquer forma, obrigado.
Please support this channel by subscribing here:
th-cam.com/users/jewijk
You might try covering a piece of ply or partical with contact paper to see if it does what tape does for saw cuts.
If that doesn't work, a bit of thinned poly or even shellac could be a game changer.
Please tell me what you think about the TTC 450, do you like it?
I bought the 450 also. So i struggle by setup the machine parameters in fusion. Do you have a xonfig file? :)
Hmm, not sure if I have this, but perhaps below will help you?
In Fusion under the post processing tab, you click on the three dots to open the post library.
In there you can search for grbl to find it. I used that post processor.
Hello,
Thanks for the video...
is it possible to replace the provided spindle with Makita RT0700CX2J,710W, 6 and 8 mm, instance?
thks
Yes, this should be possible, have seen more people do this. You would need to have the correct brackets to mount the router, and it would no longer be controlled via the software. There's also an upgraded spindle available from Two Trees if you want.
Please make video how to change tool in TTC 450
Thanks for watching and for your suggestion.
Nice video i wanna dive deeper in milling myself, do you know if there are limitations in the personal Fusion license with regard to the generation of NC Files?
Yes, there are some limitations to the free version, but this it not an issue for me though.
You can refer to below link:
help.autodesk.com/view/fusion360/ENU/?caas=caas/sfdcarticles/sfdcarticles/Fusion-360-Free-License-Changes.html
Hope this helps.
@@jewijk Thank you!
Could you show how to fix backlashes of axis, please?
Hi, thanks for watching. Anti-backlash on this machine is not adjustable. It's a brass nut with a spring on it to keep it at tension on the leadscrew.
Gaaf Jeroen! Ikzelf overweeg om de TTC 450 Pro met een 500w spindel te kopen. Mijn doel is om uit aluminium injectie mallen te maken (vis aas). Wat Denk jij? zou die daar geschikt voor zijn?
Ik denk eerlijk gezegd dat de machine voor aluminium wat aan de lichte kant is, maar met de 500W spindle en een vrij lage feedrate lukt het misschien wel. Ik zou zeker ook nog even wat andere video's bekijken.. succes!
@@jewijk Dankjewel jeroen. Waarin verwacht je dat deze te licht zou zijn? bedoel je dan in de motor? 😀
Nee, ik bedoel meer de geleiding zoals de v-wheels. Eigenlijk zou je op de assen dan lineaire lagers willen hebben, net als kogelomloopspindels, maar dan praat je uiteraard ook over een machine uit een heel andere prijsklasse. Begrijp me niet verkeerd, de TTC-450 is zeker voor wat deze kost een erg leuke machine, maar ik heb gemerkt dat er wel wat speling zit op de z-as assembly aan de x-as.
@@jewijk Oke, heeft u de standaard of de Pro variant? 😀 wat ik begrepen heb, zou de Pro variant in ieder geval een deel van die punten verbeterd hebben dacht ik? 🤔 Maar dat zijn goeie punten om naar te kijken. Nu ben ik niet op snelheid georiënteerd, dat scheelt dan wel weer denk ik🤔🤔 hmmm lastig lastig... keuzes haha
@@jewijk Maar liniair rails zouden dan zeker beter zijn. maar dan gaan de kosten namelijk ook enorm snel omhoog😅
Good afternoon, I can't understand how to choose a post processor like yours, can you please help
In Fusion under the post processing tab, you click on the three dots to open the post library.
In there you can search for grbl to find it.
What is the difference between the TTC 450 and the TTC 450 Pro
Thanks for watching.
I do not own this one myself, but from what I read, the difference would be following:
Easily expandable with several stronger spindles and an optional 20W Laser Module (TC20).
Support for an additional Rotary module
For 90% pre-assembled, so quickly operational!
Switch from CNC to the optional Laser module with 1 click
Stronger drive motors and improved limit switches
nice divice could make a arcade bartop whit these works fine it seems
Bartop arcades are fun, I have created 4 quite some time ago, and they were fun projects to do.
Hello, can you help me where can I find post procesor gbrl cps for autodesk fusion 360?
In Fusion under the post processing tab, you click on the three dots to open the post library.
In there you can search for grbl to find it.
Sim, pretendo comprar, por isso estou lhe consultando. Este site que você me passou é seguro?
Ok, yes it's safe. I have received many shipments via Geekbuying and they are a solid company.
Of course you can always ask around if you want, but I am in direct contact with them and have good experience with them.
can you make video cut with plexi glass 3-4mm to make some fonts thanks
Hi, I created a video some time ago in which I also cut mat black acrylic.
Here's the link, hope it helps.
th-cam.com/video/0NuNUvGB7KI/w-d-xo.html
Olá Jeroen. estou querendo comprar uma TTC450 e estou super em dúvidas em relação onde comprar com o menor preço e com entrega verdadeira. Voce poderia me ajudar?
Hello,
Thanks for watching, I received mine from Geekbuying and have very good experience with them. They are a reliable company, at least in my experience. If your interested in purchasing from them, let me know as I'm an affiliate with them and can always see if I can arrange a nice discount for you.
Herewith my affiliate link to the standard version if you would like to check it out.
www.geekbuying.com/go/9FGuzlmr
If you have more questions, perhaps it's good to also connect with me via my Instagram account so you can send me a direct message.
Hope this helps.
Kind regards,
Jeroen
great job !
Thanks!
Ok amigo, confio nos seus cabelos brancos...fiz o pedido e cheguei até o momento de realizar o pagamento, então eles disseram que não enviam para minha cidade e cancelaram o pedido., infelizmente. De qualquer forma, obrigado.
Ok, that's unfortunate.
Hopefully you'll find another way to purchase your machine..