I saved over £500 fitting these budget wheel arches to the Land Rover

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ก.ย. 2024
  • DISCOUNT CODE - this weekend only
    10% OFF EVERYTHING at LRparts.net
    Just enter code LR10 at check out to get 10% off everything at www.lrparts.net/ this weekend.
    Fitting these budget wheel arch spats can be a pain but follow these simple tips to get them fitted well and looking like the originals that cost over £750. These are under £100 and make any Land Rover Defender look fresh.
    LRC1114 - Budget Defender Wheel Arch Eyebrow Kit in Gloss Black Including 40 Fixing Rivits
    www.lrparts.ne...

ความคิดเห็น • 17

  • @rafflesnh
    @rafflesnh 2 วันที่ผ่านมา +3

    @0:33 That's £867 including VAT, Fraser! 😲But as to paint colour for the wheel arches, I'm inclined more towards keeping them the Raptor black finish, as it will not only tie in with other black accents on the car such as wing mirrors, but also be more durable than body colour paint when they inevitably get scratched when driven in anger. However, I can see the aesthetic (only) appeal of the body colour paint to disguise them a bit more. Difficult choice I agree, but I guess decision should be based on intended use for the vehicle?

  • @upscaleshack
    @upscaleshack 2 วันที่ผ่านมา +3

    Keep them black. If you do body color with body colored wheels you're going to need some contrast or it'll be monochromatic.

  • @chrisrundlett3707
    @chrisrundlett3707 2 วันที่ผ่านมา +2

    They look really good black. I like how they turned out with the raptor coating. I am a bit concerned about the tech screws going into the aluminium fender though. Seems like they might start exchanging electrons and cause some serious corrosion issues. Maybe it could benefit from some tef-gel on the screws?

  • @furb411
    @furb411 2 วันที่ผ่านมา +2

    I would either leave them black or maybe try and colour match them with the canvas

  • @BallooSky
    @BallooSky 2 วันที่ผ่านมา +2

    Looks awesome as is and wont look as well painted

  • @PeachyTT120
    @PeachyTT120 วันที่ผ่านมา +1

    I’d paint the originals in the same tan colour (or as close as you can get) as the canvas roof

  • @ramarover
    @ramarover 2 วันที่ผ่านมา +1

    I'd say paint them body colour, I think the black is too strong a contrast with the rest of the panels.

  • @darrenhaywood9260
    @darrenhaywood9260 2 วันที่ผ่านมา +1

    I don’t think there is a right or wrong answer tbh, however I am with the general consensus that they should stay black.

  • @craig_chaznibond452
    @craig_chaznibond452 วันที่ผ่านมา +1

    Keep them black, nice contrast.

  • @philipbarker2434
    @philipbarker2434 2 วันที่ผ่านมา +1

    Leave them in black looks better

  • @stuartdenty3163
    @stuartdenty3163 2 วันที่ผ่านมา +1

    Nice work Fraser. Big saving

  • @davidjrule66
    @davidjrule66 2 วันที่ผ่านมา +1

    body colour.

  • @jeremycooke7102
    @jeremycooke7102 2 วันที่ผ่านมา +1

    Black

  • @pauldent3059
    @pauldent3059 3 ชั่วโมงที่ผ่านมา

    I think we need to see the body coloured ones on it to decide, I only have 2 on my 130 and 1 has a small split in it and I was looking for replacements.

  • @jackmartin9008
    @jackmartin9008 2 วันที่ผ่านมา

    i bashed in my OSF arch about 3 years ago and its cracked and pealed most of the original body colour off so i have one partly black broken arch and the res body colour and iv still not decided weather i like them coloured or to spray them all black to look more like the broken one lol. but OMG 700 i didn't know that ill keep my broken one on thanks XD

  • @daveyboy5961
    @daveyboy5961 8 ชั่วโมงที่ผ่านมา

    Black looks great.

  • @rickbear7249
    @rickbear7249 2 วันที่ผ่านมา +1

    Oh gawd, now you've created a crimewave for stolen Defender wheel arches! 🤦‍♂️