Tip!!!! Put the pitman arm puller on, run it tight and smack the side of the pitman arm with a hammer and it'll usually pop it right off. I've snapped arms off the pullers cause it was rusted on lol.
That's what's taking my swap so long. Save and buy and then wait for the parts to come in lol. I finally got my heads done. I just gotta get a head gaskets set and finish up my engine. As soon as I get a flex plate I will be firing her up on the engine stand before I install her in my Vic.
Yessir!!! Man I saw that and my heart dropped…went to the internet and realized it was common issue…def would have been a lot harder to get to with engine in
That is so true 87!!!! I believe there are people out there that pray for your demise and for stuff to go wrong. I don't know if it's jealousy or what. But definitely you can't tell everyone your buisness. There are some dirty people out there. But there are some good people out there too.
Don’t sell off parts til the swap is done. I made that mistake before with the stock parts actually fitting better than aftermarket. Plus you never know where the budget takes you. Low or high
Tip!!!! Put the pitman arm puller on, run it tight and smack the side of the pitman arm with a hammer and it'll usually pop it right off. I've snapped arms off the pullers cause it was rusted on lol.
Oh yea that's how I normally do like the tie rod ends and stuff but I was never able to get it to work ont he pitman arm so I always rent a puller
@87SSBOI I used to rebuild steering parts so I still have my pitman arm puller from the late 90s.
@87SSBOI I've had less expensive pullers snap and throw the arm at me lol!!!!.
That's what's taking my swap so long. Save and buy and then wait for the parts to come in lol. I finally got my heads done. I just gotta get a head gaskets set and finish up my engine. As soon as I get a flex plate I will be firing her up on the engine stand before I install her in my Vic.
👌🏾💯
When I was young, 10 times going to the parts store didn't bother me. I go now my motivation is shot!!! You ain't the only one lol.
Man it be killin' me 😂😂😂
@87SSBOI Right?!!!!! Lol
Keep pushing bro!!! 💯💪🏾🔥
🫡💯
Ok you got some work did on it bro. We definitely see why it's not swapped yet but safety 1st. No doubt you'll get it right 💪🏽💯🔥🔥🔥🔥🔥🫡🫡🫡
Yessir!!! Safety first!!!!
LMC sells the aftermarket plate for the C-10 gearbox
Thanks! I have it 🫡
Take your time on the c10 , slow and steady wins the race 💪🏾💪🏾💪🏾💪🏾I’m glad you’re back motivated. Rest if you must but don’t quit 💪🏾💪🏾💪🏾💪🏾
Yessir HCMG🤞🏾🫡💯
Rest but don’t quit!! I like that 🫡
Yes sir!!! I had to weld a plate and reinforce that part of my buddies 84 K5 blazer. That is going to a nice truck when you get done.
🤞🏾🤞🏾🤞🏾
@87SSBOI Man I rushed home and your live was over GRRRRR
@ all good... appreciate ya🫡
My Boi started singing! Slick...I ain't heard no music in the background 😂😂
Lol...😂😂😂..it's crazy cause when I checked before uploading there was no music but there definitely was music 😂😂
LETS GOOOO‼️🔥🫡💪🏿
You know it 🫡
Progress! Im glad you got your motivation back!
Yessir!! Thanks 🫡
LETS GOOOOOOOOOO!!!!!!! Fam you gotta do a live with the C10 in the background!! The motivation is real fam!! LETS GET IT!!!!!!🏁🫡🏁🫡🏁🫡
Yessir!!! It’s coming…Thanks WG🫡
31:36 MY GUY OUT HERE WORKING‼️🫡💪🏿
Yessir, hopefully I got someone off they a$$
Been waiting for the c10 🫡
I’ma try to stay on it for a bit… thanks for being patient with me 🫡
Yes sir 💪🏾🤠👍🏾💯
🫡🫡🤠
That ol OBS WE WAITING 87ss🫡🫡💯💪🏽🔥‼️
🫡🫡
just know, I’m coming
-CA
7:43 💯💯💯
🫡💯
Yessir 💪🏽 get em done
Yessir!!! Thanks for motivating me bro!!! You def a part of me getting back on my grind
@ likewise my brother 🌙🌴
Good thing you was paying attention would have been lot harder with the engine in👍🏿
Yessir!!! Man I saw that and my heart dropped…went to the internet and realized it was common issue…def would have been a lot harder to get to with engine in
Motivation 💪🏽💪🏽
🙏🏾🫡💯
That C10 gonna come out right 🔥🔥🔥💯🫡
🤞🏾🤞🏾🤞🏾
Das wat im talkn bout… u be gettin it iiiiiin 🫡💯
🫡💯
That is so true 87!!!! I believe there are people out there that pray for your demise and for stuff to go wrong. I don't know if it's jealousy or what. But definitely you can't tell everyone your buisness. There are some dirty people out there. But there are some good people out there too.
All Facts bro 💯
Yes Sir it look good
🫡💯
Make sure your steering column is locked. If it spins it will break the clock spring.
👌🏾
Good vid Bro!
Appreciate ya 🫡💯
Motivation
🫡💯
4:43 facts do it now
Ain’t nobody coming to save us bro… let’s get it NOW💯
Let's go 💯💯💪🏾💪🏾
Yessir!!! One thing at a time
@87SSBOI yea I got a 1980 short bed
Oh yeah!!!
✊🏾🫡🫡
15:50 man i did it twice today 🤦🏿♂️🤣
Man that just grinds my gears having to stop to go to the store 🤬😡🤬😡
Nice
Thank bro🫡
Any Updates On Carfilmz Cutlass Build 🤔🤔🤔🤔🤔🤔🤔🤔
Not quite!! We getting there tho!! Ik it's been a while, stay tuned 👌🏾🫡
Yesssir
🫡🫡
Don’t sell off parts til the swap is done. I made that mistake before with the stock parts actually fitting better than aftermarket. Plus you never know where the budget takes you. Low or high
Yes indeed…I’ve def made that mistake…appreciate the input
26:22 💯🫡💪🏿
Hopefully that didn’t go over they heads 👀‼️
what up fam
🫡🫡🫡
🫡💯🦾
🫡
Yo, you got me motivated to get back on my 77 MC frame off build fam, let's go!!!🫡🫡🫡
Yessir!! Let’s get it!!!
I’m definitely watching this build My next project will be a square body 🫡🫡🫡🫡🫡lets go
Oh wow!!! Mannnn I know u gonna kill it!!! And I know she gonna have a power adder 👀😂
Yessir
🫡🫡🫡
🔥🔥🔥🔥💯💯💯🫡
Preciate ya Classic🫡
🫡
🫡💯
🫡🫡🫡
✊🏾💯