Nissan Pathfinder Injector Driver Failure and Repair!
ฝัง
- เผยแพร่เมื่อ 4 ม.ค. 2021
- In this video I replaced the injector driver on the PCM circuit board for a 2001 Nissan Pathfinder.
STUFF I USED IN THIS VIDEO:
Breakout/Bench Flashing Box: amzn.to/2LBuOcg
EEPROM Reader: amzn.to/35Lwg2G
Hot Air Station: amzn.to/3qSrxnZ
Soldering Iron: amzn.to/3nrf3S7
Flux Paste: store.rossmanngroup.com/amtec...
USB Microscope: amzn.to/3oqSs9G
"Captains" Tape LOL: amzn.to/35nwyMX
For ADVANCED Automotive Training go to www.L1Training.com
Check Out My Amazon Store HERE:
tinyurl.com/yc8d99vf
If you wanna send me something in the old snail mail, ship it to:
L1 Automotive
8703 N Owasso Expy # R Box 140
Owasso, OK 74055 - ยานยนต์และพาหนะ
PPBUS 3G HOT
I have a 2013 Rouge Does it have to use Nissan Trans oil or can I use different brand.
G3 not 3G
Dyslexia must have kicked in
I have personally repaired hundreds of these and similar models over the past two plus decades. You did real good Keith! 😅
Only thing I would mention is, if you do not have decent soldering skills and equipment, don’t try this because you can damage the ECM and if you don’t know what you’re doing you can damage it beyond repair. You’re correct, the eyelet’s must be cared for and the adjacent areas can be damaged by the solder gun/heat.
You've found a very interesting part of your overall job. I'm glad there are guys like you that can do this.
Hey Keith, long time subscriber, first time caller.
I never even thought of using Kapton tape for a heat sink, just ordered some after watching this.
I do enjoy watching these types of videos so I can pick up some tips on why I struggle with certain components or board lay outs.
Keep up the good work man.
Good morning Keith! Lois is an incredible smart guy. He is in the same boat as us with RTR. Great video
Hi Kieth . I’m coming in late on this video .But I must say love your presentations right to the point. Shot & sweet . Job done thanks .
Having done this kind of work for many years (professionally), I suggest sucking the solder out of the holes first. Then heat the bent over legs with the tip of the iron without touching the eyelet/pad with gentle pressure until they are free of the eyelet, then straighten them. The method you showed to straighten greatly increases the chance of lifting a pad and/or the trace. If the pack is sitting high enough of the board you can also clip the leads as close to the pack body as possible, then use a solder suckered and most of the time even the bent leads with such out with the solder leaving which is faster and less application of heat to the pads.
Very good advice.
I've never had any success with sucking solder off thru hole pads; there's always some tiny amount of solder left holding the pin! So I always just cut off the component, remove the legs, then suck out the solder.
@kyferez1 After sucking out the solder, put a little liquid flux on the legs and briefly touch the tip of the iron on just the legs and any remaining solder will flow onto the pin. You may also want to try some liquid flux and reflow the pins before sucking. Cutting the pins sometimes can damage the insert or pad, especially on boards with internal layers.
Love this stuff Keith, thank you
I know this video is a couple years old, but this is extremely helpful in identifying other style mosfets, instead of always looking for the standard 3 pin type. Thanks so much for this video..
So pins 1 & 10 are a Ground bar that each FET has its source attached to
Nice soldering class. Thanks for share
Legend thank you very much for sharing this with us well done
When I see some one sue amtek flux .... brings me great joy.
Thank you for your investment in the community and your desire to see us all raise the level of our understanding and our work.
This is great content, keep it up
Yes shout out to Louis!! 😃
Very cool thank you!
Hey Keith, I don’t know what brand solder wick you’re using, but I’ve found the techspray stuff seems to be the best I’ve used and I’ve tried many brands over the years.
Ahh someone knows about about solder wick...... Geat video.
What do you use to clean flux residue? Isopropyl + brush, flux remover in a spray can, etc.
Hi Great video! More power to your channel. Just a quick question, where can i get schematic diagram for chariot grandis injector driver. Thanks man!
Awesome job
Trust me when I say, FR-301 or the like. I work on vintage arcade and computer hardware, the money you spend will save you time and therefore make you more money! It was the first investment I made when I started my business.
Hi yes I want to start by saying your content is very good and very intuitive I have a quick question I replaced a CVT transmission on a 17 I removed the ECM to gain access to bellhousing bolts after reinstalling I have the new Trans reprogrammed programming was good but after I have a code p0075 that I cannot clear I checked wiring continuity for the intake VVT solenoid perform pinpoint test so far everything checks out I am leaning towards something went wrong with the ECM but before I pull the trigger and put another one in would you happen to have any information thank you very much have a great day
great video 👍👍
What type of tin solder is used? What is the temperature of the hot air device? Thank you
Hey I have a 2009 nissan titan. Bank 1 injector aren't pulsing. The coils are. Bank 2 injector and coils are working as well. Just not getting any pulse from Bank 1 injectors. Sounds the the ecm is messed up? I was reading the ipdm (fuse box) could be the problem but seeing how everything is working and the engine does run (on 4 cylinders) I was leading to the pcm. Whats your thoughts?
I got a computer issue with my 96 dodge every thing works on it but it eats gas badly changed it out with another works good dont use nearly as much gas would it be cheaper to fix it or just buy a new one
Was this setting a Circuit fault code after the wire repair?
Use a small piece of silicon hose on the end of your solder sucker. This will allow a better seal on the soldered pin in which will make it easier and faster to de-solder. Good luck and thank you for the programming vids. By the way iam new but what program are you using for eprom program and reprogramming car computers?? And where do you purchase said items??
R/C nitro fuel line is perfect size and cheap on Amozon.
I get bunch of these at salvage yard, pathfinders and qx4 lol.
What program you use to see ecus electrical diagram?
Great video Keith! I am editing a similar video on a tundra injector mosfet failure! Although my skills aren't up to par with yours lol
Reminds me of back when I fixed burned up CB radios.
@@HouseCallAutoRepair I've got a handful of CB radios from my Trucking Days!
Have a Johnson Messenger 323A found in a scrap metal dumpster at VT Industries while waiting to unload back in the early 2000's. VT Doors makes fire doors for schools, etc... They're the doors that have to be fire rated by law. That's a requirement in household doors going from Garage to House anymore these days as they've gotta have a 1hr fire rating.
You know anything about maxing out a old Johnson Messenger for talk range?
I have a Galaxy 66 as well peak and tuned with uppers & lowers and the Cobra 29Ltd which was my radio for years before the Galaxy.
I have a few other basic Cobras from over the years and maybe a radio that kicked that I bought used off of someone. There was always deals back in the day.
Hi Kieth great job. I was wondering why you use so much flux on top at first before heating up the solder, what that accomplishes? And not doing this as much myself I was amazed that using so much of the flux on there doesn’t interfere with soldering back together as it looks like it might. Thank you keep up the good work! Doug
I don't think that using that much causes a problem necessarily other than making a mess. I think he uses way too much when looking at other videos for how they do it. I am not an expert though, but when I solder I just use the cheap wax type stuff that gets me by fine. The tube stuff like this is what most pros use but not usually that much. Maybe a smaller nozzle might help get it on there a bit thinner.
Its just messy, you cant have too much flux, it doesn't interfere with the soldering at all. You want a high concentration of flux in the solder. BUT, yes too much flux does make for a mess to clean up, that's why I clean them before I put it all back together.
Listen to Keith, he is right. Also, you must clean the PCB with ACETONE afterwards. Some fluxes can eat away the tracks on the PCB over time. I build microwave transceivers that need a delicate feel and NEVER use LED-FREE, only Tin-Silver on these, because microwaves are attenuated by some solders, plus, lead free causes cracking and microcrystals to form, causing a failure of the circuit. 60 years an RF electronics engineer.
I have a Lexus and had to replace mine do you have to reprogram?
Thanks 😀
what is the part # of this part? I have fixed Honda EVAP codes by replaced with similar looking ones
Keith you forgot the links for the supplies you referenced earlier in the video so now I have to go back and find that stuff.
Just got stimulus check. Gonna talk with wife and see if she'll let me come to class now. It'll be a worthwhile investment IMHO even with me just getting into it. I'd be able to use my IM-608 for more than keys, diag for once. Lol...
OF course after doing a class like that I'd be at salvage yard buying up modules, etc.
Do you recommend using a dual OBDII adapter so one can hook 2 scan tools or multiple items to a ecm, OBDII port on a vehicle for use of multiple tools for diagnosing one thing but from different perspectives.
Fixed!
I LOVE that you are doing component level repairs. Get yourself some LOW MELT SOLDER (aka "removal alloy") and you'll never struggle with a multi-pin package removal again, safer for board, and beautiful results overall. The packages will frequently just drop out of the board, then wick or suck holes clear and cleanup with IPA & Kimwipes. The prep'd area will look LIKE NEW.
Are you using Lead Free or 60/40-Tin-Lead? I use both, depending on the age of the PCB. Sometimes I use Tin-Silver, too. Also, I use an electric solder sucker. This does a wonderful and quick removable job. Tracks are always left undamaged.
Yes, 60/40.... its lead for me!
@@L1Training The best kind...
I have pathfinder 2002 the issue is when warm engine the injector 3 and. 4 stop pulse but when I accelerate the pulse back again. Please help me if the injector problem is defective? Thank you
Hi Keith, great stuff. I have only done a handful of repairs on circuit boards mostly non auto and usually just a relay on a cloths dryer board or one for fuel pump on a dodge. I have usually just found the repair items online via E-bay or Amazon but haven’t gotten into the more complicated things like drivers. Wondering where you get your drivers and other parts from?
mouser
@@L1Training I have a car ticking over but the injectors won't progress to rev.
@@L1Training oh yes is a petrol
Vacuum desolder station should work so much faster n easier. Pace is a well known brand . Digital Key is a great source for this and parts to. Nice job.
Ive got a Hakko FR301, but the pump is down, its actually fixed already, but not in time for filming this.
Hello i ilke your share . And i have a question . can you repair Renault dc4 And ford 6dct250 tcms
Louis Rossmann's channel
m.th-cam.com/users/rossmanngroup
If you need a Mac repaired, there's no one better!
Very interesting.
I have a 1988 nissan pathfinder with a bad water temperature circuit inside the PCM
Adding low melt solder to each pin would have helped immensely in the removal of that component. You would have them been able to wick off the solder much easier and more rapidly while applying less heat to the board. In fact, you could have wicked off just the outer four, bent the pins straight, and then applied hot air to the remaining pins for just a few moments and watch the component fall right out. The remaining cleanup would have been much easier.
Northridge Fix is also a good source for Amtech flux, high-quality braid, and low melt solder.
Yep
What name Grease use
Did it fix it?
Hi how are you? My question is, how is the ecu repair market in Europe and Australia, do they mostly repair or replace?
No clue, i'm just a dumb redneck in the ol'e US of A.
hi, i am working on a chrysler pt cruiser, a high output turbo application. repairing an ignition driver. it so happens that this particular pcm does not have the typical igbt drivers. it has a ic chip driver. the one with 10 legs. have you seen something like this? i am having trouble finding a replacment. the chrysler number is 5033479ad 30F221. or even a suitable replacement. thank you.
Yes, that is common, we have had to inform most of those customers to the fact that their car is not worth the time to fix as the PCMs are all going to go bad, and used units are disappearing.
Do they make a microscope with a video output that would be awesome?You could just go ahead and work without working around the microscope.And we would see the same thing you see
I see you used the Paul-amount iof flux.
always
What is the part number?
Where can I learn eeprom stuff. Is there an online training I can take or attend a school.thanks.
EEPROMs are not used these days, more PICs are used. Though there is plenty of videos on the use of EEPROM programming and reading. I used EEPROMs back in the very late and very early 1970s and 80s.
L1 automotive do you do ecu repairs on 1997 celica i have a no injector pulse
We will repair modules we have diagnosed or that have a common problem. We are not aware of a common issue for no injector pulse on a celica that we have repair parts for.
Hello
For nissan maxima where is the coils ìc?
I dont know.
APPLY LOW MELT SOLDER TO PINS MAKES IT TWICE AS FAST TO DESOLDER THEM UNLEADED PINS..
YOUR WELCOME 😅😅
Hi am impressed, you have any direct contact, so that you can help me with those problems.
Use a vacuum desoldering tool, much easier.
Nice to see someone taking money off the big dealers. I had a Mitsubishi Colt years ago and was told I needed a new ECU to fix a misfire.
Mitsubishi original $950, used from a junker, $400.
Gave it to a tech who worked for me, changed an output transistor for a grand total repair bill of around 90 cents.
As an engineer who did my training in the days before every module became a throwaway item, here are 2 things we were taught.
1 When soldering pins on chip never go from pin to adjacent pin. For example on the 1560H we would probably do pins 1, 5, 3, 7 2, 6, 4 then 8. The logic being to prevent application of too much heat in one place, reducing the risk of lifting tracks.
2 Another thing we were taught was to always clip legs on chips before you solder them. We were taught that clipping them after soldering can apply pressure to the newly soldered joints , making them unreliable.
I'm sure everyone has their own view on this.
That said, I've watched a few of your videos now and enjoy what you do.
If your work is good enough for Eric O, then who am I to criticise!
Hello..can yo show eeprom file eeprom imo and non imo? I need file.. because my ecm dtc p0506 broken eeprom..
Sorry, i do not send files as that would be copywrite infringement
As I was watching this video I was saying to myself - where is HAKKO FR300/301 de-soldering gun in this video??? After years of use my 300 still going strong and just about any through hole IC/resistor/cap, etc can be removed without damaging PCBA or surrounding SMD's. Highly recommended.
My fr301 is getting the pump repaired.
@@L1Training Even good tools require repair! Excellent content and video!
You really need to buy a desoldering station. your going to do more damage potentially with a soldapullit.
I've got a Hakko FR301, but the pump died, its fixed, but not in time for the filming of this.
11:04 modle car nissan ecu
That's an awful lot of flux.... plus the solder wick you're using looks awful saturated
Yep....
Why? They are like $27 at the junkyard
because eventually, none are left at the scrapyard... and why replace when we can fix!! ;)
You got lucky. You should invest in some proper desoldering equipment or at least a decent solder sucker.
And, you should trim the leads before soldering, or at least reflow them after trimming, so there is no exposed copper.
Or not. Your call.
Rather be lucky than good any day.
you need desoldering gun
have fr301, but the pump is dead, actually it was fixed when the video was released, but not in time for filming.
Hello i ilke your share . And i have a question . can you repair Renault dc4 And ford 6dct250 tcms