Yes, this will be because you need an update. It's free and can be found here: www.minelab.com/manticore-software-upgrade It will give you the Stabiliser and lots of other cool features.
Can you lose good targets with stabiliser function? I’ve never used it yet as I’ve heard others comment that they have lost a good target, small Roman, when turning on. Must admit I’m a little conflicted whether to try it or not.
In theory. yes. But only if you were using the stabiliser really, really high and it was a really tough target. The Stabiliser is there to make the detecting experience more enjoyable and to save you time, so personally, if you need it, we'd say use it. PERFORMANCE over DEPTH every time!
So running the Manticore on the beach, particularly in the wash/surf drop-off zone, it is difficult to run it at a 23 sensitivity... I find less than 23 sen I start to miss small gold. So why no stabilizer for the surf mode? Using the enhanced audio mode is a cheat I've started to use but it's not the best as you really have to listen for the small/weak targets. I know lowering the sensitivity seems to always be the common answer, but then you sacrifice smaller gold??? If I want to sacrifice small gold and have a quiet detector I could just breakout the Excalibur... So why no stabilizer for surf mode??? 🏖️🧲(((📿💍🪙⛏️⛏️⛏️🌊
Paul opted for this technique on this day and he knows this beach very well (he picked the location on this day). I will check with him as to why he preferred this method and get back to you!
Hello, I chatted with Paul, and he noted that there is particularly high iron (WWII finds and scrap) in this area. He was detecting on the wet sand, not the surf which is quite different. Paul used All Terrain General with the stabiliser to combat this. But, he also noted that sometimes he feels the stabiliser makes the machine more stable in these conditions and then you can squeeze slightly more from the sensitivity. We don't know of any plans for Minelab to add stabiliser to the beach mode.
Fantastic stuff... so much better than most of the 'influencers'
Thanks 8-)
I needed this info for my manticore. spot on
Great to hear!
always love your content lads methodical and informative
Much appreciated!
Great tips again guys...interesting on the recovery speed 👍😎
Great videos learning loads 👍🏼
Thanks 👍
Great series super informative
Glad you think so! Thank you for watching and commenting!
Really helpful. Thank you
Glad to hear that!
Interesting Kev Pritch. Cheers
Great tips
Glad you think so!
#maticoreexpert..great machine from the looks of it
It's a banger!
Good stuff guys :)
Awesome!
Brilliant video, and some good bits to takeaway. When is it good to have horseshoe on and off?
Thank you mate!
It depends on your preference. Some people detect in All Metal, all of the time, and others prefer to use it as a check when they have found a target.
Great video
Thanks for the visit
hi great info on the manticore just had a look but dont have the stabiliser on the machine. any reason why
Yes, this will be because you need an update. It's free and can be found here: www.minelab.com/manticore-software-upgrade
It will give you the Stabiliser and lots of other cool features.
Need to be updated
Subscribed! 👍 I’ve been an XP user for many years, but would definitely not say no to giving the Manticore a go! #ManticoreExpert 😊
Liked and shared👍
Can you lose good targets with stabiliser function?
I’ve never used it yet as I’ve heard others comment that they have lost a good target, small Roman, when turning on.
Must admit I’m a little conflicted whether to try it or not.
In theory. yes. But only if you were using the stabiliser really, really high and it was a really tough target. The Stabiliser is there to make the detecting experience more enjoyable and to save you time, so personally, if you need it, we'd say use it. PERFORMANCE over DEPTH every time!
How deep are these targets?
We didn't measure precisely but if memory serves us we'd guess about 6 inches. The ground conditions were very wet and it was a muddy soil type.
Possibly time to upgrade the ctx 3030
They have this.
I have had the ctx for years this is just as good just as deep if not deeper and a better machine.
Ste meek
Jake Avery
Add a stabiliser for the beach ….
Joanne hodson
Alan Bell
Deborah law, Xmas
Ragnar Ragnarsson
@nikiy86 #ManticoreExpert
@lunarheartscrafts
So running the Manticore on the beach, particularly in the wash/surf drop-off zone, it is difficult to run it at a 23 sensitivity... I find less than 23 sen I start to miss small gold. So why no stabilizer for the surf mode? Using the enhanced audio mode is a cheat I've started to use but it's not the best as you really have to listen for the small/weak targets. I know lowering the sensitivity seems to always be the common answer, but then you sacrifice smaller gold??? If I want to sacrifice small gold and have a quiet detector I could just breakout the Excalibur... So why no stabilizer for surf mode??? 🏖️🧲(((📿💍🪙⛏️⛏️⛏️🌊
Paul opted for this technique on this day and he knows this beach very well (he picked the location on this day). I will check with him as to why he preferred this method and get back to you!
@@crawfordsmetaldetectors standing by! ⛏️⛏️⛏️⛏️⛏️⛏️
More good advise and liked the information from Mark on not needing continual updates - great phrase “engineers dream”
Hello, I chatted with Paul, and he noted that there is particularly high iron (WWII finds and scrap) in this area. He was detecting on the wet sand, not the surf which is quite different. Paul used All Terrain General with the stabiliser to combat this. But, he also noted that sometimes he feels the stabiliser makes the machine more stable in these conditions and then you can squeeze slightly more from the sensitivity.
We don't know of any plans for Minelab to add stabiliser to the beach mode.
@@crawfordsmetaldetectors hmmm.... I'll give it a try tonight!🧲(((💍🏖️🌊
Great tips. Wonderful machine! @crazyantics_
The best!
@anieshipearl
@safemoonscouser