Tap Drill Size explained in tamil | Tap drill size for metric and inches thread holes
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- This video is discussed about tap drill size for metric and inches thread holes.
1:15 That is counter bore symbol not countersink
TO DOWNLOAD PDF / PPT FILE CLICK HERE: zerotohundred1...
#tapdrill #tapdrillsizeformula
Feel free to ask your doubts/clarification/ questions here.
Super naa🎉🎉
Nice brother
Trigonometric calculation using in Engineering drawing videos pottunga anna please
@Venkatesh S
Engineering drawing la trigonometric calculation ah? Detailed ah enanu soningana useful ah irrukum
5/16-18 X 3/8 Ithu explain pannuga bro UNC
0.5 mm x 25.4
Value 12.7 in mm but y in this 12.5 iruku pls reply
5H,6H என்றால் அர்த்தம் என்ன bro full video podunga
Noted bro
Counter bore aa than counter sink nu solreengala. Athoda real standard name enna. Apram 2 symbol koduthirukkeenga, .38 la onnu,.51 ll onnu. which one is correct?
@chinna durai
Yes, counterbore than countersink nu solitten by mistake. Already video description la mention paniten. Sorry for the inconvenience.
.38 is countersink
.55 is counterbore
Thanks bro
Welcome
Thank you sir
Please explain sometimes we are insert pin for measuring related dimensions these unc,unjf threads why
There is a possibility of taper on thread Bore due to tapping process, thus always recommended to use PIN gauge to measure the thread bore. If there is taper on the thread bore the PIN will not enter full depth. Hope this answers will help for your question.
Even the drawing not called for thread minor diameter, we should measure the thread minor diameter by using PIN gauge
Please explain serration on flanges
Most of the flange side face called for serrated phonographic finish for sealing purpose, the flange side face should not be too smooth and not too rough. Basically customer specify how many machine grooves(serration) required per linear inch depends on their requirement. Based on my experience with one of our customer, their drawing called 50 grooves per linear inch & each groove radius can be .031 R and groove depth should not exceed .0008" The main important thing, the serrated face should not exceed 250 Ra surface finish.
Diameter 5.55 looks counter bore
உங்க வீடியோஸ் ரொம்ப useful இருக்குங்க அண்ணா
@Venkatesh S
Thank you very much
1/2 inch 12.7mm bro.. 12.5 nu by mistake sollirukinga..
Sorry my mistake
@@zeroto1009This method is not suitable for all inches thread
It's wrong
I have a doubt
GD&T rules 1&2
What is this
Noted, will make a separate video soon as possible.
Bro 10mm ku drill evlo mm ku podanum
It depends up on thread pitch
0.5*25.4= 12.7
sorry, my mistake. thanks for highlighting
Thanks bro
Welcome