I have used Castrol 20-50 oil till now. Can I change brand? My bike is 1986 model and got engine work done. 10 thousand kilometers have been done. Still no problem and no sound.
bro, how much oil will be shown in the dip stick? yesterday i filled oil upto middle of the stick, but today morning oil is not showing in the stick. what it mean anything wrong??? i not even started the engine & i couldnt find oil leakage. kindly suggest
Thank you for the comment !! I am not quite sure if we can use diesel instead of M3, but what I can sense is Diesel might not show a good result (and not sure how safe it is to use Diesel because if we add, we need to run the engine ideal for 10-15 minutes so because of heat the diesel may burn or may result to other bad complications), so I think its better to go with proper engine flush - its pretty much easily available in amazon.in.
Hi there, 20w50 are more for the older engines like the Cast Iron ones. For the CI engine I think the best available one is Motul 3000 4T 15W50, but before finalizing I would advise you to talk to your local mechanic too. Thanks !
MotoRide Food N Travel .. I have 2008 electra 4s speed gear set (opposite side) / cast iron ? / old Bullet ? Do explain what should I call & I have used Liqui moly 15w50 synthease technology So what if I switch back to 20w50 synthetic technology... The difference of WINTER / cold grade ..does it effect engine if I service it again ..or should I stick with 15w50 synthetic technology.. Do reply soon appropriately for all questions asked abv.. Thanku
Lekin aapane bataya nahin Hui Kitna kahan par dalne ka...... Oil capacity bataya nahin aapke mail to hua hai na Kali oil change karke Kitna dalne ka vah kyon nahin bataya aapane
@@rideatease Thanks! I recently bought Thunderbird 2007 limited edition and was confused 😝 By the way you did a great job creating the video... detailed one. Keep going! Best of luck 👍
You have done one big mistake while opening the Engine case bottom oil bolts.. U have removed only two bolts from engine case bottom side. Last one u didn't removed, if u open the third bolt also u will drain a huge quantity of engine oil..😎 What happens u will add new Engine oil and it mixes with old oil in the engine. The quantity of oil will become more and after Engine runs continuously over flow of Engine oil will flow out from Engine and the piston and rings will worn out....😎😎😎
😂if you use oil flushing liquid on every oil change, your bullet piston rings will go , then you will get oil leakages through rings, you will see soon, congrats.....
Neatly done good 👍
Very informative keep doing vlogs
thank you !!
It's a passionate guy working on his bike..well done brother
Super cool and informative bro...
Exilent video
Good
I have used Castrol 20-50 oil till now. Can I change brand? My bike is 1986 model and got engine work done. 10 thousand kilometers have been done. Still no problem and no sound.
yeah you can change brands, but if the current brand is giving good results then you can stick with the same. Thanks !
Engine side how much oil required?
Clutch side how much oil required?
cam wheel side how much oil required?
Have you ever added abro oil treatment
Very informative video.
Bro.. 80tis 90tis Bullet ki oil change same hai kea ???
Or 20w/40w dal sakta hu ?
Hello bro ! absolutely yes
Excellent work for your sir ji👌👌👌👌🙏🙏🙏🙏
Thank you !! :)
Good one bro
Sir ji bullet five speed m २०w ५० dal sakte h
Bhai Saab engine main kitna
Litters dalla.. not a for clutch side...
Good Work
Thank you!
Thank you brother 🙏
Thnks bro for giving a lot of information
thank you bro, glad you liked it !
Nice
I did the same work by changng the oil but unfortunately the 21 no nut where oil from timing gear cover becoming leak after completed the oil change
have you checked/replaced the seal. With seal you should be using the gum like paste to prevent oil leakage.
bro, how much oil will be shown in the dip stick?
yesterday i filled oil upto middle of the stick, but today morning oil is not showing in the stick. what it mean anything wrong??? i not even started the engine & i couldnt find oil leakage.
kindly suggest
How.much oil u used for engine
Excellent video. May I know for how many kms we should change the engine oil?
thank you !! it's highly recommended to change every 3000km.
You are learned mechanic..thanku.... Both clutch and engine oil are same grade?
Thank You, yeah it's the same oil grade !
The clutch needs 10-30w 4t oil. Engine oil grade is different and if used in clutch, it can cause slippage
How much oil did you totally use...??
2.5l
Thank you bro
This video helps me to change oil better 👍👍
is the gasket paste sticky? will it glue things shut?
yep, it is sticky enough.
Konsa model bike h? How much it has run kms? Sound is great. No extra sound is it the stock exhaust and bend.
hi there , sorry for delay in reply. Hope you are doing good !!
It's 2008 model, ran around 57000 KM. stock silencer no modification.
Please share the review of shell20w50
Keep creating more videos on bullet also 😊😊👍
Nice bro i to own a 1970 model
I am from Chennai
sir i have done my engine work done its cost me 15000 ruppes but oil leaking issue not gone what should i do
Que hermosa motocicleta!!!!
gracias !!
Very nicely explained..... Great video.... I like it....... Can we use diesel for engine flush if we have not M3?
Thank you for the comment !! I am not quite sure if we can use diesel instead of M3, but what I can sense is Diesel might not show a good result (and not sure how safe it is to use Diesel because if we add, we need to run the engine ideal for 10-15 minutes so because of heat the diesel may burn or may result to other bad complications), so I think its better to go with proper engine flush - its pretty much easily available in amazon.in.
Make more videos on royal enfield
How much oil do you put in the timing case? I'm assuming somewhere around 250 ml. Or is it a bit more than that?
hi there, it's around 250 ml
@@rideatease thanks. One more thing. Have you tried semi synthetic or a synthetic oil or you're sticking to the regular mineral oil?
Bahi oil filter kisme bigoya tha
vahi engine oil mai
Good job bro nice keep going on...
I have RE electra 5speed 2008 CI engine, can i use Shell 20w50 fully synthetic engine oil ?
Hi there, 20w50 are more for the older engines like the Cast Iron ones. For the CI engine I think the best available one is Motul 3000 4T 15W50, but before finalizing I would advise you to talk to your local mechanic too. Thanks !
@@rideatease thank you.. Sir
MotoRide Food N Travel .. I have 2008 electra 4s speed gear set (opposite side) / cast iron ? / old Bullet ? Do explain what should I call
& I have used Liqui moly 15w50 synthease technology
So what if I switch back to 20w50 synthetic technology...
The difference of WINTER / cold grade ..does it effect engine if I service it again ..or should I stick with 15w50 synthetic technology..
Do reply soon appropriately for all questions asked abv..
Thanku
bhai wiring Fuse sub chek kr liya fir bhi bike start nahi ho rahi..old bulled...1982
spark plug and ek baar governer b check kar lo. agar fir b nahi start ho raha hai to last option mechanic se hi check karvana padenga. ☹️
Nice one. The best part is , you are speaking very good Hindi.
Thank you!!
Bro use same oil for clutch also?
Yep we can use the same oil
Sir after how many time you changed the oil?
every 3000 km
Tapped cover oil capacity bro
Use 10w30 in clutch
U didn't change the suction filter??
no, I think it was in good condition hence cleaned and used the same..
@@rideatease u didn't show the suction filter in the video🙄
@@rideatease it's better to change these filters rather than clean and use them again... Anyway it's personal opinion 👍
my bad !
that's a good thing though, next oil change will go for a replacement, thanks !!
Nice video dude and nice hinglish.
Thanks you so much bro
Bro nice presentation about the oil change and maintenance for the bike
Nice video 👍
Lekin aapane bataya nahin Hui Kitna kahan par dalne ka...... Oil capacity bataya nahin aapke mail to hua hai na Kali oil change karke Kitna dalne ka vah kyon nahin bataya aapane
Bohot ache.. 👍
Nice bullet hi cameraman
Bro, how to check level of engine oil???
the oil intake will have a lid with a bar attached to it, that will show the level of oil present...
@@rideatease Thanks! I recently bought Thunderbird 2007 limited edition and was confused 😝
By the way you did a great job creating the video... detailed one.
Keep going! Best of luck 👍
Nice bro.. Just let me know how many litres where needed in engine because mine is a 2008 model old bullet?
around 2 to 2.5 liter (its always recommended to have some stock)
I have 2003 model Standard & 2014 model Standard
Wow !! Lucky chap I say 😁
ਹਿੰਦੀ ਮੇਂ ਬੋਲੋ ਅੰਗਰੇਜ਼ ਸਰ ਜੀ
Great video brother. This encourages me to try it myself. Pls do a video on Gear Box Oil change !
sure bro ! will give it a try & soon I am gonna upload fork oil change too. So stay tuned !!
👍
You have done one big mistake while opening the Engine case bottom oil bolts..
U have removed only two bolts from engine case bottom side.
Last one u didn't removed, if u open the third bolt also u will drain a huge quantity of engine oil..😎
What happens u will add new Engine oil and it mixes with old oil in the engine. The quantity of oil will become more and after Engine runs continuously over flow of Engine oil will flow out from Engine and the piston and rings will worn out....😎😎😎
Ye to old Bullet engine .
भाई जी हिन्दी भाषा का प्रयोग किया करो
ज़रूर !! मेरे अगले वीडियो में .
धन्यवाद !
@@rideatease
🙏
No oil in engine
Hello
Hi there
Has been recorder with lot of noise made by children, not pleasant
Hiii
Yah to hindi bola yah einligh
Bro tamil bro
Mogl kina par gya eh de ch
Sala backwash
😂if you use oil flushing liquid on every oil change, your bullet piston rings will go , then you will get oil leakages through rings, you will see soon, congrats.....
Thanks you so much bro
👍