FINALLY...!!! This is the kind of product the everyday off-road consumer needs. Not everyone can spend hundreds of dollars for a lighting kit and this appears to fit the need for most. Thank you
Would have been awesome if you had done a comparison of the stock vs the acerbis headlight during the night so that we, as potential customers, could get a better feel for the thing.
I installed this on my 701 Supermoto. It’s pretty good for the price. It’s better than the Cyclops bulb. It would be perfect if like 4 of the LEDs were spot LEDs. They are all flood LEDs. I have it adjusted so, it doesn’t bother uncoming traffic. But, at the same time it is very noticeable for incoming traffic, even during the day. I also have Cyclops multifunction turn signals. Which are daytime running lights, when the turn signal is off. With this setup, I’ve noticed that a lot more people get out of the fast lane when I come up on them, or move over when I’m lane splitting.
Finally a decent mid-priced option. Seems every other LED option was $250+ Can you get it to work with an XC assuming you bought the extra bits? I know they come wired for a stock one
Best Budget alternative, strong, Wish Acerbis make for other brand, I install one on my WR450F, hooked up with upper original bolts, then you have straps included for forks.. adjustable but not on fly..recommended..
Can I install one of these on a 300xc which did not come with a headlight? I heard there is a harness behind the OEM # plate, but never verified & I don't have a switch to control the light.
If you have plugs behind the number plate Acerbis says you can. However Acerbis has no instructions on how to wire to a bike that doesn't already have a headlight. You will need to check your wiring diagram to verify. You will also have to wire in your own switch to control the light. Hope this helps.
If your bike is wired for one then yes. However, we don't show this headlight as fitting the 2019 250 XC. We do show the KTM headlight fitting your bike though. www.rockymountainatvmc.com/parts/ktm-headlight-kit-p
We only list these for the bikes that come with headlights from the factory but if you have a connector for a headlight, this should work for your bike. Acerbis does make a newer model which comes with the updated front number plate but we don't yet have that available.
This light is designed for specific KTM and Husqvarna bikes with an existing headlight so modifications would need to be made. You will also need to check if your bike produces the DC power that this light requires.
The same Acerbis headlight but for a 2014 KTM does not have the plug N play quick connector. What is the best way to wire it? It only has a black and red wire.
These headlights are meant to be plug and play on bikes with OEM headlights. You would have to cut the plug off and figure out how to wire the power and ground wires to your bike.
This headlight is designed to be plug and play and work on bikes that come from the factory with a headlight. An upgraded stator should not be needed on those bikes.
Received mine from RM ATV MC yesterday - and installed it on my KTM 300 XCW in under 90 seconds.
So much brighter.
FINALLY...!!!
This is the kind of product the everyday off-road consumer needs. Not everyone can spend hundreds of dollars for a lighting kit and this appears to fit the need for most. Thank you
These product spotlights translate directly to sales. I watched the video and had one ordered in 5 mins.
Would have been awesome if you had done a comparison of the stock vs the acerbis headlight during the night so that we, as potential customers, could get a better feel for the thing.
It is light years brighter!
Wired VSL onto my 09 beta 525rs, love it. Silly bright.
This light will work on just about any bike with a DC supply wire
I installed this on my 701 Supermoto. It’s pretty good for the price. It’s better than the Cyclops bulb. It would be perfect if like 4 of the LEDs were spot LEDs. They are all flood LEDs. I have it adjusted so, it doesn’t bother uncoming traffic. But, at the same time it is very noticeable for incoming traffic, even during the day. I also have Cyclops multifunction turn signals. Which are daytime running lights, when the turn signal is off. With this setup, I’ve noticed that a lot more people get out of the fast lane when I come up on them, or move over when I’m lane splitting.
I have one on my bike but it only comes on when the switch is on low beam. Is there a way to wire it so I can also have high beam and shut it off?
Thinking about putting the KTM one on my DRZ
Finally a decent mid-priced option. Seems every other LED option was $250+ Can you get it to work with an XC assuming you bought the extra bits? I know they come wired for a stock one
Best Budget alternative, strong, Wish Acerbis make for other brand, I install one on my WR450F, hooked up with upper original bolts, then you have straps included for forks.. adjustable but not on fly..recommended..
How does the universal model mount? Will this run off of a 50w coil with a 12v rectifier?
Can I install one of these on a 300xc which did not come with a headlight? I heard there is a harness behind the OEM # plate, but never verified & I don't have a switch to control the light.
If you have plugs behind the number plate Acerbis says you can. However Acerbis has no instructions on how to wire to a bike that doesn't already have a headlight. You will need to check your wiring diagram to verify. You will also have to wire in your own switch to control the light. Hope this helps.
Does this bolt on to the vintage Xr200r (2001 model)? Any advises are greatly appreciated. Thanks ✅🕊️🌄
I have a 2001 kdx with no battery would I be able to use this light on my bike
I’ve got a 17 fx350, no factory headlight. What else do I need to install this light?
Can you please show a close up of the wiring as mine came un wired
If you email our sales department they may be able to help you out with images. Sales@rockymountainatv.com
any clearance issues with the regulator/rectifier on a 21 Husqvarna te 300?
Any issues with it going dim / flickering on a 2020 300 tpi ?
I got a 2019 KTM 250XC looking for a light bike didnt come with one but is wired for it im pretty sure will this work for it?
If your bike is wired for one then yes. However, we don't show this headlight as fitting the 2019 250 XC. We do show the KTM headlight fitting your bike though.
www.rockymountainatvmc.com/parts/ktm-headlight-kit-p
How much does it weigh? Is it shockproof?
Little over a pound and shock resistant
Will it fit a 24 300xc with correct harness?
We only list these for the bikes that come with headlights from the factory but if you have a connector for a headlight, this should work for your bike. Acerbis does make a newer model which comes with the updated front number plate but we don't yet have that available.
Work with 2022 Gas Gas rc300?
It's kind of universal..
Mine only has dim, if I turn it to bright it shuts off. Is that how it’s supposed to be?
This light only has one mode, on or off.
I know this might be hard af to answer but does it fit a '98 honda XLR 125 R
This light is designed for specific KTM and Husqvarna bikes with an existing headlight so modifications would need to be made. You will also need to check if your bike produces the DC power that this light requires.
Will this work on my 2023 ktm 150xc-w?
Yes, this will work for your bike.
The same Acerbis headlight but for a 2014 KTM does not have the plug N play quick connector. What is the best way to wire it? It only has a black and red wire.
Hi mate, did you manage too wire this up ? And if you did how lol
Can I use the stock mask??
It would require minor modifications but your OEM headlight mask could work.
@@rmatvmc THANK YOU ⚡️⚡️⚡️
Do you have any options to upgrade an xc model to this?
Unfortunately we do not have any headlight options for the KTM XC models.
What would I have to do in order for this light to work on my 2017 ktm450sxf
These headlights are meant to be plug and play on bikes with OEM headlights. You would have to cut the plug off and figure out how to wire the power and ground wires to your bike.
@@rmatvmc thanks for replying 👍
Does it have hi and low beam or only on/off?
This light does not have a hi and low beam setting, just an on and off switch.
Stock is just on off, at least on my KTM.
Can i install it on husquarna fc 350
No, this is for bikes with an existing headlight.
Does this fit on a crf3000l?
No, unfortunately this light is for KTM and Husqvarna motorcycles.
Do these lights work on KTM SX F bikes?
No, these lights are meant to be a direct plug-in replacement for bikes with a stock headlight.
Too bad its not for the ktm 690 enduro r... :(
Could I put this on a 2016 350sxf?
Unfortunately, this headlight is designed for 2017-2021 models and would not be a direct plug in for your bike.
Does this fit 2006 KTM exc
Unfortunately, this headlight is for 2017+ bikes.
@@rmatvmc why would it not work on an older bike?
Do u reckon i can fit this to my Rieju mrt 125?
What about 2021 ktm 450 sxf?
This is a direct plug replacement in for bikes that come with a headlight from the factory.
Just clicked the link. Out of Stock.
Does this work with stock stator, 2022 ktm 350 xcf (NOT xcfw)
This headlight is designed to be plug and play and work on bikes that come from the factory with a headlight. An upgraded stator should not be needed on those bikes.
In guessing this puppy ain't road legal?
Edit - nevermind, found that info on the RMATVMC listing
Off-road only
Does it have a high and low beam?
It does not have High/Low.
I don't think..
Xr 400 compatable?
These also work on older carbureted KTM 2strokes, you just need a rectifier.
th-cam.com/video/iDm-UJkJnDo/w-d-xo.html