How to set up Smart Dimming with the Shelly Dimmer 2
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2020
- See how easy it is to install the Shelly Dimmer 2 without having to connect a neutral cable!!! Let me know in the comments what you think of this dimmer and what alternatives there are in your opinion!
Apologies for the noise at certain points. It seems that I need another microphone. 🙄
I did not get paid for this video and am in no way affiliated to Shelly. If this video helped you, please give it a thumbs up, subscribe to my channel, and share the video.
The Shelly dimmer 2 makes it possible to dim your lights and keep your traditional wall switch functional at the same time. Let's see how it works!
⭐⭐⭐
I cannot do this without your support!
If my videos save you time, you can support me in the following ways:
* Join this channel to get access to perks: 📺 / smarthomejunkie
* Please consider becoming my patron 🏅 at / smarthomejunkie
* Please support me by buying me a ☕ at www.buymeacoffee.com/smarthom...
⭐⭐⭐
See the list of Smart Home devices that I use here:
github.com/smarthomejunkie/My...
Check my channel for more awesome Smart Home tutorials: / smarthomejunkie
#homeautomation #iot #smarthome - แนวปฏิบัติและการใช้ชีวิต
If you want viewers to "See how easy it is to install the Shelly Dimmer 2 without having to connect a neutral cable!!!" Then show them how easy it is to install!! A moving, unsteady camera shot of a completed installation just doesn't cut it!
That said, thanks for your efforts.
Well, I guess I have to thank you for this 😉
Well you’re correct some of us appreciate the short video. In my opinion be better if he does a separate video showing wiring it up.
can also able to wired and controlled via dimmer on the wall like your center controller in 07:25 ?
Nice video! Regarding your question at the end: sure there are other solutions, but they are either way more complicated to install, or way more expensive! Shelly produces awesome products. Where did you get yours if I may ask?
I won it in a give-away contest 😊
Thanks for this video. We have the impression that the bulbs flicker a little I have the same problem at home so I unplugged it because I am not sure of my assembly. And when I turn on the switch the light goes out after 4 seconds. I will give another try tomorow.
Any progress on this yet?
Hoi, mooie video!
Maar moet je echt twee impulsschakelaars gebruiken?
Kan dat ook niet met 1 impuls?
Dus is het mogelijk met 1 schakelaar? Ik vermoed dan kort drukken is aan of uit, lang drukken is dan dimmen of helder (wisselwerking)?
alvast bedankt en grts...
I tried that, but it didn't work.
Mooi filmpje! Je ging heel snel over de aansluiting heen zonder N... Ik wil de Dimmer2 aansluiten zonder N en met een enkele pulsedrukker. Die enkele heb jij ook zie ik, maar ik ben dus benieuwd naar de enkele puls zonder N. Heb je daar al iets over gemaakt?
Daar heb ik niets apart over gemaakt, maar als je het beeld op pauze zet, dan zie je hoe het aangesloten is.
Thanks for the video. A question about wiring. In your "no neutral" picture you have 4 cables. I have only 2 cables going in to the back of my light switch, giving a switched live. What are your 4 cables? I downloaded the manual and still don't understand. Thanks 😊
I have another switch next to this one. I guess that you mean the cables that are routed through for that switch.
@@SmartHomeJunkie @Smart Home Junkie At 2:47 you show the dimmer with 4 wires connected, but you don't explain what these wires are and how they connect to your switch. Do you even have a wall switch? We don't see. I found your video when trying to make sure this would work with my wiring, but unfortunately this important bit of information is missing. (I think this is what the other poster meant when they commented above).
Yes, I use a pulse switch. And the colors of the series should explain itself. They are connected confirm the color codes that are usually used when you connect lights to wall switches.
You have to buy a shelly wire set with it. 1 black wire from that wire set you connect to the SW2 on the shelly and the other black wire goes to the L next to the SW2 on the shelly. These 2 black wires you have to connect to your switch. The brown one that you have disconnected from your switch goes to the other L on the shelly.
Top filmpje mooi gemaakt.
Thank you 🙏🏻
Thanks for the video. But why would you show the most important things (wiring) for only a few seconds?
You can push the pause button if you like :) The wiring diagram is in the manual that comes with the Shelly Dimmer. It's really easy to install.
is het ook mogelijk om 3 lampen met 3 dimmers simultaan te laten dimmen met 1 dubbele pulsdrukker? dus 1 knop voor brightness omhoog en 1 knop voor brightness naar beneden?
Als ze alledrie via dezelfde dimmer lopen wel denk ik. In dit geval zou ik persoonlijk voor een Zigbee oplossing gaan.
very good video Sir, will you plz tell if connected led lamps are flickering??
Hi! Thanks! They are not flickering at all.
At what percentage are they flickering, or all the levels?
Hoi Ed, mijn vrouw vind een draai dimmer een must en wil geen app gebruiken. Daarom heb ik de zigbee ecodim geinstalleerd zodat ik die ook via Home assistant kan schakelen en bedienen. De Ecodimmer heeft een gewone draaiknop en zigbee, het is wel even wat gedoe om het werkend te krijgen in HA.
Wat een mooie toepassing!
hello you can send images of cable connection with neutral cable option. because the images are blurry in the movie and it's hard to see what's what. I have a problem with the connection, I will be grateful.
I am sorry, but I'd have to screw everything loose again.... Maybe you can set the video on pause?
Nice video! 1 quick question, I saw somewhere you can also regulate the brightness by pushing the button for some seconds, with that same button. Can you explain how to settle up please? :)
Thx. To be honest, my light switch doesn't seem to support this so I can't tell... 🤷🏼
@@SmartHomeJunkie thanks, I re did the question, as may be it was not properly explained.
@@dannyazcutia7602 No no, your question was clear. My switch does not support this. But there is a setting to set the Shelly to edge switch. I guess that might work if you have a correct switch.
Great question. Here in the US, I installed a switch by Levitron or Lutron and it works but not quite as elegant/simple/quick as a lever/wall-based dimmer (probably user issue!!). If you are interested, I'll dig up the TH-camr that recommended the switch and how it was wired.
@@rdy4trvl please, share it, despite I have already purchased all switcher at home, still interesting which ones and how you do it. Thanks!
what is the function of third L(live)from left side , when start to count from O
Just extra terminal for different setups.
Thanks for the addition!
How can you dim the light with only the wall switch?
I don't think you can.
If you are driving multiple loads make sure they are all the same, don't mix wired transformers and switch mode. Shelly go boom otherwise, speaking from experience.
please bieb out ok google in your next videos :D my system was flipping
Oh great! You just gave me an idea to create the perfect prank video!!!! :D
video starts at 2:40
Okay
You need to censor the G word
So, I got your attention! 🤪
Be aware that it loses all the settings after power cut, before you install many of them in your house.
WARNING!
Overtemperature issues! It just won't work as a dimmer.
www.shelly-support.eu/forum/index.php?thread/10525-dimmer-2-overtemperature-high-temperatures/
Thank you for this great addition