the first 20 seconds of this video is so true .....IF working on rusted junk go big or go home..otherwise the med torque is smaller and better in small areas
Good assessment. I got the gen2 1/2" high torque and the 12v stubby 1/2" and I love the combination. The stubby does 95+% of what I need without the extra 5 pounds and the big boy can get anything else.
A good vid, this is a versatile impact for most users. I like the way singlecam will push his tools to their limits, not afraid to really put them to the test 👍🏽
I've seen all these individual videos good job compiling all of them in one! Mid torque for cars and light trucks all the way. All that junkyard crap with heavy duty rust you need the high impact. As you can see the mid torque was able to handle some of those intensley rusted axle nuts. Knowing the limitations of your tools is a good thing it doesn't make the tool weak. The mid torque is a great tool and far beyond weak. It has plenty of power and I was able to take rusted nuts off my latest project.
Idk man I've been using a 600lb impact for a few months because i thought it would be good for tight spaces. Well, it's good about 90% of the time. But that 10% when i have to get the breaker bar out and do it by hand makes me regret everything. 600lbft seems like a lot, but it's really not that much. I just bought a 1200lb impact because i was tired of not being able to get stuff loose with "only" 600lbs. I don't even work on big stuff, all small newer import cars.
SD MTB Lot’s of suspension stuff, over torqued lug nuts, caliper bracket bolts with loctite on them, balancer bolts. Basically any time you look at something and say “fuck I really don’t want to do this by hand” it can’t do it and you end up doing it by hand. The 1200lb gun has saved my ass over and over again
Perfect for guy working on own car. I have it and did shocks on my truck front and back and no problem. Very seldom do you need the big boy high torque. I'll just use breaker bar. I do want the 3/8 stubby next
Good video, answered my questions on the mid torque milwaukee. I had the first version of the milwaukee impact, which is comparable to the mid torque produced today. It was good for about 90 percent of automotive work. Going to buy the new high and mid torque milwaukee now. I wish they would come out with a impact ratchet and 90 degree impact like the IR hammerhead. That would cover just about all of my impact needs.
Because the high torque won’t fit in a lot of places on a passenger vehicle that this will. This will do 85%-90% of what you need on a passenger vehicle and fit most anywhere you need it to. The high torque is overkill for a lot of people whether they are DIYers or professional techs. The only reason I have one is because I work on heavy equipment. I haven’t needed it for my personal vehicles or any of the vehicles my customers bring me.
Yeah he is bang on about going with the high torque this is not much stronger than the compact at 220ftlb bought this with high hopes BIG let down. 600. Not even close. Maybe 260.
Perfect video! Good to see you again! I see this tool has low power :( Very beautiful but low power and it can't loosen some bolts or nuts. How much is it? Greetings from Colombia!
Hey man I have the same impact us model. Something is wrong with yours. Mine is a beast I don't understand why the one you have is struggling so much. Is this a Canadian model? I also have 5.0 amp battery. Maybe return yours?
That IR is amazing! I do alot of my own car work and if didn't need a light and a smaller impact driver I would of bought the IR. The IR looked like it did better then the Milwaukee.. And the IR on paper has less Tq. My Milwaukee removed all blots even with rust it even totally snapped a lug bolt. Can you make more videos Milwaukee? Something just seems to be odd about the one you got.
the ir and milwaukee are pretty much same size the ir is a little smaller both were pretty much same power. someone posted that something was wrong with the ir too because it couldn't remove the axle nut but it couldn't do it because it just don't have the power. its not good for that stuff.
glad your back,,, was wondering, if worth,between the 2763, and 2755B ,,,,, but not so sure, thx, waiting on the 2767,see if smaller than my 2763,,, the 2754 3/8",is good too.
Nice video. I’m thinking the 2767, 1000 ft/lbs but not as compact, plus the 2754 compact 3/8 drive at 210 Ft/Lbs might be an ideal combination. Not surprised the mid-torque won’t always remove axle nuts.
Ruben Perez it’s only on average $30 more. My issue is I don’t really need 1,400 lb-ft for a Toyota Camry, the high torque is quite hefty compared to the compact size of this one
The high torque are nice but they are freaking huge and honestly most cases you will not need the torque. Unless you're in a shop most diy mechanics will never need that kind of power.
Its good to test the impact on the rusty bolts as well as the easier bolts, so we can have a better idea on the true , real world capability of am impact, good video singlecams
Awesome! Thank you! Also, great video, I know what to expect and which Impact to go with now! I also found your attachment, Thanks again! www.amazon.com/Milwaukee-48-03-4410-Shockwave-2-Inch-Adapter/dp/B002KKBBR4
thanks very much I think theres not enough views and likes and I see lots of these guys getting more views and likes for putting on and taking off a lugnut and talking for 5 min so I don't know really.
singlecams. I understand....... they don't actually test them like you did tho. all of them use at home testing and it's not really accurate to real life.
thanks man like my ryobi p261 video th-cam.com/video/9_FNmUB0-Mk/w-d-xo.html got more dislikes than likes and it's an awesome video! lol 😂 don't knwo what to say
Please check out my amazon store to help support the channel
www.amazon.com/shop/singlecams/
the first 20 seconds of this video is so true .....IF working on rusted junk go big or go home..otherwise the med torque is smaller and better in small areas
I like this review, it shows the limits of what the tool can and can’t do and where it struggles
Good assessment. I got the gen2 1/2" high torque and the 12v stubby 1/2" and I love the combination. The stubby does 95+% of what I need without the extra 5 pounds and the big boy can get anything else.
A good vid, this is a versatile impact for most users. I like the way singlecam will push his tools to their limits, not afraid to really put them to the test 👍🏽
I've seen all these individual videos good job compiling all of them in one! Mid torque for cars and light trucks all the way. All that junkyard crap with heavy duty rust you need the high impact. As you can see the mid torque was able to handle some of those intensley rusted axle nuts. Knowing the limitations of your tools is a good thing it doesn't make the tool weak. The mid torque is a great tool and far beyond weak. It has plenty of power and I was able to take rusted nuts off my latest project.
Idk man I've been using a 600lb impact for a few months because i thought it would be good for tight spaces. Well, it's good about 90% of the time. But that 10% when i have to get the breaker bar out and do it by hand makes me regret everything. 600lbft seems like a lot, but it's really not that much. I just bought a 1200lb impact because i was tired of not being able to get stuff loose with "only" 600lbs. I don't even work on big stuff, all small newer import cars.
@@Xixu.co.6 Im planning to buy one of this mid torque wrench so doing my research. Which parts you couldnt loose with the 600lbs?
SD MTB Lot’s of suspension stuff, over torqued lug nuts, caliper bracket bolts with loctite on them, balancer bolts. Basically any time you look at something and say “fuck I really don’t want to do this by hand” it can’t do it and you end up doing it by hand. The 1200lb gun has saved my ass over and over again
Perfect for guy working on own car. I have it and did shocks on my truck front and back and no problem. Very seldom do you need the big boy high torque. I'll just use breaker bar. I do want the 3/8 stubby next
Good to see you back
Thanks for shout out buddy
I think so.
TOOL BOSS
Don't use chrome socket for impact wrench.
Use black solid impact sockets and you feel the huge difference.
Nice video
Greetings from Pakistan 🇵🇰
Good video, answered my questions on the mid torque milwaukee. I had the first version of the milwaukee impact, which is comparable to the mid torque produced today. It was good for about 90 percent of automotive work. Going to buy the new high and mid torque milwaukee now. I wish they would come out with a impact ratchet and 90 degree impact like the IR hammerhead. That would cover just about all of my impact needs.
Looks like they finally listened and came out with the 90* impact you mentioned lol
Mike T , yeah I do not think that was too difficult to predict, going to have to pick one up along with the two m12 die grinders they have out.
Thanks to this vid,I'm going to buy high torque model
Thanks to this vid, I'm gonna buy a different brand.
I got that one and the high torque for removing those big nuts to get into and have their 1/2 inch and 3/8 m12 stubbys love them
Believe it or not using chrome sockets rob torque from impacts. That could be why it won't take off some of the axle nuts.
I would rather buy the 2767 with higher torque. Prices are not very different
I can't wait to have a garage big enough for the crx and other cars.
I think I'm going to hold out for the new 1,400fp monster that's supposed to come out soon. Another GREAT video.
Superman that's sounds like a good idea.
Wheel bearing salesman
fomocore Exactly! He’s destroying the wheel bearing lmao
I see that you using it in last mode (its for fastening when you dont want to overtitening bolts) so put it in mode number 3 it will work.
no difference in reverse
Si el tornillo o perno y tuerca están oxidados la pistola no lo saca
Can this remove Toyota V6 crankshaft bolt?
I guess I'm having trouble understanding why many people would choose this over the high torque wrench.
Because the high torque won’t fit in a lot of places on a passenger vehicle that this will. This will do 85%-90% of what you need on a passenger vehicle and fit most anywhere you need it to.
The high torque is overkill for a lot of people whether they are DIYers or professional techs. The only reason I have one is because I work on heavy equipment. I haven’t needed it for my personal vehicles or any of the vehicles my customers bring me.
Great upload, buddy! Nice to see you back.
Thanks mdlee52 for the message!
No problem, buddy! I've always appreciated your videos.
Yeah he is bang on about going with the high torque this is not much stronger than the compact at 220ftlb bought this with high hopes BIG let down. 600. Not even close. Maybe 260.
Same. Sorry to hear that but I'm glad I'm not the only one. So many good reviews that I don't see how?? It's okay
Perfect video! Good to see you again! I see this tool has low power :( Very beautiful but low power and it can't loosen some bolts or nuts. How much is it? Greetings from Colombia!
hi thank you you too you almost at 100 000 subscribers! :) this tool around $200 USD
It’s a Milwakee impact high quality tool and inexpensive
Hey man I have the same impact us model. Something is wrong with yours. Mine is a beast I don't understand why the one you have is struggling so much. Is this a Canadian model? I also have 5.0 amp battery. Maybe return yours?
I thought it did similar to this th-cam.com/video/oTsQ5Ne1UcI/w-d-xo.html nothing wrong with it that is just how they are
That IR is amazing! I do alot of my own car work and if didn't need a light and a smaller impact driver I would of bought the IR.
The IR looked like it did better then the Milwaukee..
And the IR on paper has less Tq. My Milwaukee removed all blots even with rust it even totally snapped a lug bolt. Can you make more videos Milwaukee? Something just seems to be odd about the one you got.
the ir and milwaukee are pretty much same size the ir is a little smaller both were pretty much same power. someone posted that something was wrong with the ir too because it couldn't remove the axle nut but it couldn't do it because it just don't have the power. its not good for that stuff.
Mill9999 damn straight bro! Mid torque all the way! Lol!
The mid torque takes off axle nuts like nothing.
glad your back,,, was wondering, if worth,between the 2763, and 2755B ,,,,, but not so sure, thx, waiting on the 2767,see if smaller than my 2763,,, the 2754 3/8",is good too.
thanks very much david. I think if the 2755 can't do it youd probably just use the 2763 anyway
Nice video.
I’m thinking the 2767, 1000 ft/lbs but not as compact, plus the 2754 compact 3/8 drive at 210 Ft/Lbs might be an ideal combination. Not surprised the mid-torque won’t always remove axle nuts.
Spend the extra money and get the new hi torque 2nd gen
Ruben Perez it’s only on average $30 more. My issue is I don’t really need 1,400 lb-ft for a Toyota Camry, the high torque is quite hefty compared to the compact size of this one
The high torque are nice but they are freaking huge and honestly most cases you will not need the torque. Unless you're in a shop most diy mechanics will never need that kind of power.
@@zack6892 ..you right..!!
This is a great impact gun the problem is that you just using it at wrong spots maybe do a second vid
if you send me video I will post it
Its good to test the impact on the rusty bolts as well as the easier bolts, so we can have a better idea on the true , real world capability of am impact, good video singlecams
"wrong spots" you say? like car bolts? were you hoping he'd use it to roll up toilet paper?
Good advice
at work we uses these machines too and we are not satisfied with the capacity of the batteries!
They sell a lot of different size batteries now some last 8 hours or longer now if I remember correctly
I feel like the rigid did better. What do you think? I'm deciding between the two
Milwaukee just because the m18 lineup is better then rigid so you will have battery for when you need your next tool.
nick faust im going to get the new Ridgid octane👍👍👍👍cant beat $150
Do you have a link or info on the attachment you used for the rotor screw at the end, and bit size?
look for "SHOCKWAVE 1/2" Square to 1/4" Hex Adapter"
Awesome! Thank you! Also, great video, I know what to expect and which Impact to go with now! I also found your attachment, Thanks again! www.amazon.com/Milwaukee-48-03-4410-Shockwave-2-Inch-Adapter/dp/B002KKBBR4
0:48 use a breaker bar sir then the tool
The 2767 1400 impact would have loosened it.
I would not get the mid torque impact!
please don't stop making videos
thanks very much I think theres not enough views and likes and I see lots of these guys getting more views and likes for putting on and taking off a lugnut and talking for 5 min so I don't know really.
singlecams. I understand....... they don't actually test them like you did tho. all of them use at home testing and it's not really accurate to real life.
thanks man like my ryobi p261 video th-cam.com/video/9_FNmUB0-Mk/w-d-xo.html got more dislikes than likes and it's an awesome video! lol 😂 don't knwo what to say
How does this compare to the ir w5132?
Whats the 20 at the end mean? Ive seen it say 20ct 21ct and 22ct is one better than the other?
-20 mean bare tool -21 1 battery -22 2 battery
singlecams thank you for the reply! I just bought it on sale for $200
How are u liking it
it's ok buddy no probs unlike my drill lol I will have to make a video about the drill chuck lol
singlecams lol sounds like deja Vu with mine
what is the adapter at then end the screw driver called
1/2 in. Square x 1/4 in. Hex Impact Adaptor
Which junkyard is that?
1:51 Is it possible to wear the bastards out?
Yes, if it takes longer than 5 seconds, STOP.
Pneumatic is still king.
Battery shake like a shit on 1:54 ))))
This or the Ryobi?
Hi man! How are you?
i'm good buddy :) hope you are doing ok?
I am Ok! Thank you! Nice to see you again!
you too hope everything is safe there
hehe you are back? :)
thanks, good video!
Por eso las hechan a perder, demasiado tiempo para romper tuercas
Привет! Сравни этот аппарат с Ryobi.
Милуоки сильнее
You're abusing $400 gun. You need to take some class how to use impact gun.
I overbought 😂
1
That things lags, the 2763 better
Rubbish.
This tool is trash get the high torque
the tool might be trash but the video is great
singlecams yes thank you for the video