I Designed a 3D-Printed Book Charkha! (Spinning Wheel)
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- I (JB) am super excited about this one! This is a project that I have been tinkering with for over 2 years, and I am pleased to announce that the designs are now available on Thingiverse and we are now selling kits at Goodandbasic.com and on Etsy.
www.etsy.com/l...
You can also print one yourself. I've posted the design on thingiverse at this link.
www.thingivers...
=====================================================
Support Good and Basic at and buy cool merch (such as a charkha spinning wheel kit) at goodandbasic.com
Help support the channel and learn with a free Audible trial (including free audiobook): audibletrial.co...
Nassim Taleb's books: amzn.to/2YpWql0 and amzn.to/2MiKn6A
Podcast: anchor.fm/goodandbasic
Twitter: @goodandbasic
Instagram: @good_and_basic
Music credit: Spanish Summer from audionautix.com
Can I get the measurements for the cigar box? I’m sure bigger would be better than smaller when I go look for one.
Did you ever figure out a good size? I'm cutting mine out today, so really want to make sure it's right.
June 2024, I bought one of these and am very happy with it.
Mine just arrived from your etsy shop. I had to pause and rewind the video a few times but I managed to get it put together!
Breadcrumbs to here from the Charkha you sent to JillianEve.
That's where I first saw it. Today I'm hoping to make my box, and my kit should be here in August!
I was pleased to see you are using readily available components for the parts that are not "printed." I am very excited that you used cotton balls for your demo. I plan on using the thread made for biodegradable fishing nets.
That was really cool! Liked the demonstration with the cotton ball. For some reason I didn't think it would work with those! XD fun to watch
Thanks! JB
Great thing about cotton balls and cotton batting (the stuff you use to stuff quilts and pillows) is that it is already cleaned and combed.
Hi,
what's the diameter of the Bic pens please. I'm having trouble getting them in the UK. TIA
I asked for this for my birthday. I'm working with my dad to make an artsy looking box that I can put it in! I can't wait!
Awww yes, more textile videos from G&B are always welcome. Any plans for a "farm to table" item - card and spin some wool and knit yourself a hat or pair of socks with it? I imagine it would take a very long time to spin enough to thread to use on a loom
Edit: I somehow missed the previous video about 3d printing sock knitting machines which gives a bit of a hint!
Absolutely! Probably more than one. JB
It desperately needs a 💧 of oil here and there
The updated version is a lot quieter. JB
It is amazing too see all the things you are able to make!
Would love to have one of these to learn how to spin cotton yarn on!!!
I'm sure that's a good book!
It spins a good yarn! JB
Next do a kick spindle?
Oooh. Interesting idea! JB
@@GoodandBasic Etsy served me your product listing for the charkha kit when I searched for a kick spindle. (And I do love the charkha kit.) I've always been a little put off by kick spindles because they either look like the kick wheel is really heavy or like they're so light the thing isn't going to stay in place when you kick it. And a nice one is ~$400 but the most difficult engineering is decreasing the friction where the spindle rests against stand.
That sounds like a solvable problem. I'd probably make the wheel with cutouts for adding metal weights.
Cómo la adquiero?
I got your charka kit and love its looks. Unhappily, I can't get the pieces onto the rods for the spindles. Will the lighter trick work to make the holes larger?
The spindle pieces are intended to fit quite tightly, and the holes occasionally come out undersized from the printing process. If you can't get the spindles through the holes, remove the "L" shaped hinge pin from the spindle holder and use it as an awl, rotating it back and forth in the holes in the spindle discs and spindle pulleys to make them the same size as the spindles. They should fit well after that. JB
@@GoodandBasic I'll try it. Thanks. Can't wait to get spinning.
I use bits of corn husk for spindle bearings on my other charka. They don’t get as fuzzy and still hold a bit of oil
What a clever idea! JB
I watched a video yesterday of a 3d quill for the EEW by dreaming robots. *
His is thicker (the quill) but seeing yours, it would be interesting if his quill was thinner for using with cotton.
Electric spinner.
It is sobering that cotton balls, so readily available at the poundshop/dollar store, is perfect for spinning.
I am itching to try a tahkli style supported spindle i want to make with a double pointed knitting needles (for socks), a kitchen ceramic bowl and a few heavy nuts...
But the roving was an issue.. (the hobby shop asks nearly 3 pounds for 10gr of wool roving.)
Thanks.
Time I popped out for two dog brushes and a bag of cottonballs.
3 questions. Is there a way to get the box to stay still without having to clamp it? When I get mine delivered, I will use a plank of wood for the spindle parts but don't want to clamp it as I do not have one. Is there a way to make it to where it is not so loud??? Finally, think you could 3D print a handheld cotton gin?? Maybe with 2 rollers and a hand crank? Thanks!
This is sooo cool! I'm definetly going to print this
interesting to see you are using a long draw. i was wondering what drafting method would be best for such short fibers. spinning cotton is on my to learn list.
I'm so glad to hear that! I'm releasing a tutorial for spinning cotton on this wheel on Friday. JB
With the cotton I’m starting to grow this will be perfect thank you so much
That sounds like a really cool project! JB
@@GoodandBasic thank you I’ll have to show you what I make once I make thread XD
Absolutely. JB
flfc
Actual first. JB