The oil will present itself on the dipstick in the form of a blob that can easily be seen, the petrol primer needs only to be pressed about 3 times plus as the mower is in use it actually charges the battery up as you go along , just disconnect it over the winter when the mower is not in use and a quick charge at the start of the season is all you need.
Hi Emax, I don't bother draining the fuel tank but, make sure the fuel cap is screwed on tight. Just tilt the mower on its side at a 45 degree angle and the old oil will come out. I'm sure you know this but, for those that don't the oil lug nut is located just under the oil filler spout
Hi I wish I'd bought a Briggs & Stratton, much simpler. Plus you have yo go to Germany for spare parts. They stopped uk selling them. I know posts on here are really old but if you read this, can you tell me if primer bulb should have a hole in it. A little blob of rubber has come off so I'm assuming it shouldn't have a hole?
Hi Dorothy, there is what I would call a little nipple on the end of the bulb where you push to prime the mower. It does appear to have a tiny hole in it which I think is a one way valve to allow the bulb to fill with fuel. If the bulb is not perished or leaking I would leave it. If it is, you can pick up a new one from most Industrial supplier outlets and I think you will find they are universal. Hope that helps😀
@@naturalhabitatlandscaping3681 Hi thanks for replying so quickly. Unfortunately the nipple has come off and exposes biggish hole. Not sure if it will still work or fuel will come out hole. Don't you supply parts? Would a Briggs primer bulb fit the Einhell?
Hi Dorothy, sorry I don't supply parts I'm afraid. I would imagine that the Briggs primer will fit Einhell but, I can't be 100% sure. Best thing to do is ask at a Hire centre where they hire out mowers and the like, they should be able to advise you.😉
Hi Vineesh, there's a black plastic lever/toggle on the right hand side near the wheel at the back. If you pull it away from the body of the mower it drops the level up or down to adjust the height. Hope that helps 😉
Hi Paul, should be in the box mate?? If you bought it through Amazon, get in contact with them and I'm sure they'll send some out to you..... although I didn't find the instructions a lot of help!
The oil will present itself on the dipstick in the form of a blob that can easily be seen, the petrol primer needs only to be pressed about 3 times plus as the mower is in use it actually charges the battery up as you go along , just disconnect it over the winter when the mower is not in use and a quick charge at the start of the season is all you need.
Thanks for putting this vid together 👍🏽👍🏽
No problem 👍
Hi - I have one of these. It is due an oil change. Do I have to empty the fuel tank before flipping the mower on its side to drain the oil?
Hi Emax, I don't bother draining the fuel tank but, make sure the fuel cap is screwed on tight.
Just tilt the mower on its side at a 45 degree angle and the old oil will come out.
I'm sure you know this but, for those that don't the oil lug nut is located just under the oil filler spout
Hi I wish I'd bought a Briggs & Stratton, much simpler. Plus you have yo go to Germany for spare parts. They stopped uk selling them. I know posts on here are really old but if you read this, can you tell me if primer bulb should have a hole in it. A little blob of rubber has come off so I'm assuming it shouldn't have a hole?
Hi Dorothy, there is what I would call a little nipple on the end of the bulb where you push to prime the mower. It does appear to have a tiny hole in it which I think is a one way valve to allow the bulb to fill with fuel.
If the bulb is not perished or leaking I would leave it. If it is, you can pick up a new one from most Industrial supplier outlets and I think you will find they are universal. Hope that helps😀
@@naturalhabitatlandscaping3681 Hi thanks for replying so quickly. Unfortunately the nipple has come off and exposes biggish hole. Not sure if it will still work or fuel will come out hole. Don't you supply parts? Would a Briggs primer bulb fit the Einhell?
Hi Dorothy, sorry I don't supply parts I'm afraid. I would imagine that the Briggs primer will fit Einhell but, I can't be 100% sure.
Best thing to do is ask at a Hire centre where they hire out mowers and the like, they should be able to advise you.😉
@@naturalhabitatlandscaping3681 thank you for helping a 74 year old single woman.
Sorry I couldn't be more help Dorothy. I really hope you manage to get it sorted
What do you recommend using to clean the foam air filter?
Hi Trefor, personally I would use petrol and rinse it clean with that
@@naturalhabitatlandscaping3681 thanks for answering and for posting the video👍
How do you adjust the height of the mower
Hi Vineesh, there's a black plastic lever/toggle on the right hand side near the wheel at the back. If you pull it away from the body of the mower it drops the level up or down to adjust the height.
Hope that helps 😉
where do i find assembly instruction as they stupidly don,t include them ?
Hi Paul, should be in the box mate?? If you bought it through Amazon, get in contact with them and I'm sure they'll send some out to you..... although I didn't find the instructions a lot of help!
@@naturalhabitatlandscaping3681 thankyou . sorted now.