Cool that you used my A2 for this video! Glad that you replaced the seal that snapped, and plugged in the power cable;) I honestly can say that I'm glad you did this tire change instead of me--it's quite involved! I've only ridden the new tire for about 20k so far, and it feels a bit more maneuverable than the knobby tire it replaced, but given its width, it's still not as responsive in turning as my T3 skinnier tire. Guess it just takes some getting used to.
Screws to be removed: 4 + 12 + 4 + 8 + 4 + 13 = 45, then uncover the motherboard, then 6 wires to be unplugged and then the wheel remains connected to the shell via the cable, just to make the further handling a little harder. On a V8F, it's 16 screws and 6 wires to unplug where the motherboard needs to be uncovered too but the motor becomes separate from the shell. That we need to open up the motherboard to change the tire doesn't look like good design to me.
Hey.... I did a Tyre change on my m10-4 but I can't get the edge of the Tyre to sit on the edge of the rim. Do you know what I can do to get the edge of the Tyre to sit on the edge of the rim.
Hello, I Changed my tire and when i put it back together now the wheel wont start and im dumbfounded all wires are looking fine and all plugged in, whats could possibly have happened :S
@@2cells1pack nope, people are telling me the mainboard is dead, i noticed the battery plug is kinda toasty, and sparks alot when i put it in and out, but they say thats normal. i just dont know what happened XD
Damn, the convenience of this wheel.. waterproofness.. TUBELESS tire, I m seriously considering trading in my V12 Hs with 2k km on it, because maintnance on it aka getting out the motor to do anything, is so deeply annoying, It might be a good choice.. I dont know , I would definitely miss the top speed
Cool that you used my A2 for this video! Glad that you replaced the seal that snapped, and plugged in the power cable;) I honestly can say that I'm glad you did this tire change instead of me--it's quite involved! I've only ridden the new tire for about 20k so far, and it feels a bit more maneuverable than the knobby tire it replaced, but given its width, it's still not as responsive in turning as my T3 skinnier tire. Guess it just takes some getting used to.
nice, got any footage? the knobby may be a bit too vibrating for me
It is an amazing tire for your wheel. I thoroughly enjoyed my test ride after completing the change :)
there's no way i would leave you with a broken seal :p
Thanks!
Thank you! Your videos are very useful! Keep it up!
I would like to know what is the electric screwdriver that you are using in this video
That wheel looks badass with that tire. I want one now.
I wanted street tires but the knobbys feel good
Street tire was such a smooth ride. Accelerated much better too
Probably a good idea to re-silicone the hall sensor plug since it has no locking clip and the silicone is not just there for looks.
A very helpful and well-presented video. Thank you.
I like that screwdriver too.
I like it too :)
Those pliers are better known as balloon expander tool.
Very helpful video for A2 owners. Thank you 👍
if Eevee's dropped the price of the a2 to the same as ewheels for neon November i would get it as my winter commuter
Screws to be removed: 4 + 12 + 4 + 8 + 4 + 13 = 45, then uncover the motherboard, then 6 wires to be unplugged and then the wheel remains connected to the shell via the cable, just to make the further handling a little harder. On a V8F, it's 16 screws and 6 wires to unplug where the motherboard needs to be uncovered too but the motor becomes separate from the shell. That we need to open up the motherboard to change the tire doesn't look like good design to me.
Yeah, in the current crop of wheels I was disappointed when I took it apart
Are the side and top pad screws the same as the top board cover screws? Same width/length at least?
your video on the v12 really helped. can you make one on the Mten4by begode
Mten 4 is quite similar to A2 I believe ?
Nooooo... there are 13 screws on the top! Very unlucky! :P :P
Good video, as usual. Kudos.
Hey super random do you know what size these screws are?
Such a wicked little wheel 😊
It really is!
Hey.... I did a Tyre change on my m10-4 but I can't get the edge of the Tyre to sit on the edge of the rim. Do you know what I can do to get the edge of the Tyre to sit on the edge of the rim.
You’ll need to visit a gas station and use a compressor. Electric air pumps don’t have enough volume to seat the head
Hello, I Changed my tire and when i put it back together now the wheel wont start and im dumbfounded all wires are looking fine and all plugged in, whats could possibly have happened :S
It doesn't turn on at all?
@@2cells1pack nope, people are telling me the mainboard is dead, i noticed the battery plug is kinda toasty, and sparks alot when i put it in and out, but they say thats normal. i just dont know what happened XD
Did you put the phase wires on in the wrong order perhaps? @@Jaeger2011
Hey what size are those 13 screws at the top? Anyone? I’m at the hardware store right now!
Ah I’ve never measured them
Where can i buy this tire?
I believe your local retailer should have them. Street and knobby versions
Hey what's a good tire presure for the a2 for a 155lb rider
35psi is good to start with
I always test before covering main board
I got my a2 in and learning on it. Let me know if you want me to try anything on it. It's gonna be my daily commuter soon
It’s a cool last mile or short commute wheel !
was the tire 80/80 14?
no, it's much smaller. I forget the exact size.
Great video 😊👍 wish there was a test ride in the end 😅…
Review will come later :)
Damn, the convenience of this wheel.. waterproofness.. TUBELESS tire, I m seriously considering trading in my V12 Hs with 2k km on it, because maintnance on it aka getting out the motor to do anything, is so deeply annoying, It might be a good choice.. I dont know , I would definitely miss the top speed
I think the v12 and a2 have different use cases.
Nobody asked what tire you are using. 😅
It’s good info regardless
Hm?
Ужасная конструкция 🙄