I have ordered a new piston & ring set from an Australian seller on eBay because my dads GX35 powered Line trimmer engine is beginning to burn more oil after 21 years of hard use. I am just going to hone it out with a brake cylinder hone , replace.the piston and rings then run it like that,I rebuilt his 20 year old GSV190 powered Honda lawnmower with just a new standard piston & rings,it was a little smoky on startup for 15 hours of run time but it seems to have stopped now. I had to replace the piston because the original rings weren't available anymore since Honda superseded them with a newer design. I was worried that the cylinder wasn't round anymore & there were low spots in the cylinder so I kept honing the cylinder until it was fully deglazed,I had to keep honing out the low spots in the cylinder !
thank you sir sa video na ginawa mo laking tulong sa amin kase ung ginagamit kung grass cutter eh biglang namatay nong gnagamit q ng paandarin q sana eh d mahatak ang starter
Percebi quando você montou a parte de baixo do motor digo o cárter você não usou junta de motor ou cola é assim mesmo? Nesses motores não precisa de junta ou cola
Pano po ung samin lage namamatay tapos napansin ko sobra basa ng gasolina ung loob..ngtry ako paandarin na nakatanggal ung sa may exhaust part..lakas tapon ng gasolina..prang binabasa lng nya ung spark plug..para mg adjust nun??
Sir gud eve, ung sa akin 4stroke nabaluktot ung mahabang tubo na aluminom, pwede bang unatin sir, wala bang masisira sa loob?....nababaklas ba yan sir tubong mahaba na aluminom.
Opo yan po ang original Nas 14-15k ang price nyan itong Inaayos ko peke po ito. Kong gusto nyo ng original doon po kaau bibili sa Honda mismo or authorized dealer nila. Kong sa iba peke napo yan
Pag 4 stroke sir kalmado lang talaga ang makina pero malakas na di kagaya ng 2 stroke na galit talaga pag revolution. Check mo clutch nya sir baka manipis na kaya nasabi mong mahina sya
I have ordered a new piston & ring set from an Australian seller on eBay because my dads GX35 powered Line trimmer engine is beginning to burn more oil after 21 years of hard use.
I am just going to hone it out with a brake cylinder hone , replace.the piston and rings then run it like that,I rebuilt his 20 year old GSV190 powered Honda lawnmower with just a new standard piston & rings,it was a little smoky on startup for 15 hours of run time but it seems to have stopped now.
I had to replace the piston because the original rings weren't available anymore since Honda superseded them with a newer design.
I was worried that the cylinder wasn't round anymore & there were low spots in the cylinder so I kept honing the cylinder until it was fully deglazed,I had to keep honing out the low spots in the cylinder !
Galing need n rin siguro ng gnyan yung amin di n mahila pero daan ko n lng s mekaniko para sigurado. Salamat s pag share ng knowledge
thank you sir sa video na ginawa mo laking tulong sa amin
kase ung ginagamit kung grass cutter eh biglang namatay nong gnagamit q ng paandarin q sana eh d mahatak ang starter
replace only the piston? the cylinder also had to be changed
Nice video. Galing ng forbiden technique mo sir haha.
Salamat boss, sa oras ng kagipitan binagbabawal na technique ang kailangan he he
Thank so much
Galing mo lods sna magawa ko ung d2 saken
Got a question:
What is the specific gap on that overhead cams?
Percebi quando você montou a parte de baixo do motor digo o cárter você não usou junta de motor ou cola é assim mesmo? Nesses motores não precisa de junta ou cola
Cual es la medida en mm la luz de válvulas
where you buy sparepart
Is engine ma clutch ka spring na lagye to gya hoga
👍
May i ask a question ? Is It possíble to replace the piston without change a crankshaft?
Yes, if the crankshaft is still in good condition
Pano po ung samin lage namamatay tapos napansin ko sobra basa ng gasolina ung loob..ngtry ako paandarin na nakatanggal ung sa may exhaust part..lakas tapon ng gasolina..prang binabasa lng nya ung spark plug..para mg adjust nun??
Mgkno ngastos nyo po sa parts..?
Piston rings lei set
magkano magpa-overhaul sa inyo ng honda na grass cutter? san po location nyo?
Matanong ko lng po Valve clearance ng intake and exhaust? Thank you po
0.02mm hanggang 0.08mm intake
0.02mm hanggang 0.11mm exhaust
Saan po nakabili gamit po
Yung sa akin po hindi pò mahila ang starter string namatay po ang makina na ginagamit. Ano po kaya nasira nagstockup kc
Ano po loc.nyò
Kailangan nang buksan ang loob ng makina po malamang sa crankshaft at piston rod problema
Boss paano mag tono ng carburator ng gx35
Pahigpit po bah or paluwag Yung pag tono. Paano po Yung papalalakas at Hina ng tono ng gx35
Bos ano kya cra ng gx35 q bgla naging mausok at mahirap paandarin.tnx
Kong matagal Nayan sir malamang manipis na piston ring
mgkano boss piston nyan
gud pm may tanung ako may gras cutter ako ayaw handar lagi ciya na lulunod anu gagawin ko
Baka loose compression nayan. Pero adjust mo muna valve clearance kong ganon parin check nyo na piston ring.
ano ang gap ng feeler guage sa magneto at sa timing
0.1 mm po
@@THERMOCOOLTECH thanks sa reply , pagpalain ka pa
boss kapag naglagay ka ng piston ring kahit ano po pwesto nya
Hindi po, dapat may tamang position po nuod ka ng tutorial sa tamang position ng 4 stroke na piston
saang online ka sir nabili ng piyesa niyang grass cutter
Lazada po sir
Boss anong store online an binilhan mo ng mga pyesa sa grass cutter mo?
amazonで売ってますね
ok na man yung fake basta gumagana lang
Sir, talaga bang Hindi na aandar kapag loss compression na yong piston? Kasi iniisip ko baka yon ang dahilan kung bakit ayaw umandar sa akin ..
Opo ang hirap paandarin pero kong grabe na hindi na talaga aandar
Sir pg lostcompretion ho ano ho ba cra?
Piston ring po
Sir gud eve, ung sa akin 4stroke nabaluktot ung mahabang tubo na aluminom, pwede bang unatin sir, wala bang masisira sa loob?....nababaklas ba yan sir tubong mahaba na aluminom.
May rod din sa loob nyan boss subukan mo lang unatin boss. Di ko pa nasubukang magtuwid nyan
palitan mo na, sayang effort pagbukas
Boss ano size Ng inorder nyo na piston?
Gx35
Alin mas mahusay sir 4o2 stroke
Sa 4 stroke tahimik at walang usok sa 2 stroke mausok at medyo maingay pero mas malakas sya kasi mas malaki konti ang kanyang piston kaysa 4 stroke.
Ok lng b sir ung honda na galing thailand
Opo yan po ang original Nas 14-15k ang price nyan itong Inaayos ko peke po ito. Kong gusto nyo ng original doon po kaau bibili sa Honda mismo or authorized dealer nila. Kong sa iba peke napo yan
Boss ung skin 4 stroke tumatagas ang langis ano kya problema non. Salamat
Kong nabuksan na yan baka hindi maaus pagkalagay ng gasket. Or check mo baka nasobra ang oil mo bumubuga kasi pag sobra
Ganyan din SA akin boss. Tumatagas
Hirap humanap ng parts ng gx50
Bkit po sa akin ayaw magalit Ng maganda ginhawa nman start
Pag 4 stroke sir kalmado lang talaga ang makina pero malakas na di kagaya ng 2 stroke na galit talaga pag revolution. Check mo clutch nya sir baka manipis na kaya nasabi mong mahina sya
Sir san kaya ung problema nong grass cutter may tumatagas n langis halos kumalat na s motor nya. Salamat
anong pusibleng cause pag mausok ang engine?
Piston ring
Boss 4 stroke yung grass cutter ko pag uminit na kaina biglang namamatay bago nmn crab nya ig coil nya ano kaya sira boss
Check mo valve clearance at piston ring boss
Boss 3months palang 4stroke grass cutter ko. Anu kaya papalitan.
Kong walang sira bakit mo papalitan? Change oil lang nmn ang maintenance nyan every 8 hours na gamit mo palit oil
Sir tanong ko lang bakit yon sakin umaandar naman pero walang hatak?
Check mo clutch nya baka manipis na
@@THERMOCOOLTECH paano po kung bago lng pero bigla na lng nawala ang hatak..ano po kaya posibleng dahilan
@@LeojayBaguinan ipa tune up nyo po check na rin ang clutch lining
English title then put everything in Tagalog?! WTF?!
Fake na Honda ung ginagawa nyo class A
Tama po kayo fake Honda po yan