I got the cheapest mountain bike I could find and my other half refuses to use it as she doesn't like the blue and red colour scheme. Not worth the effort paying lots of money to sort it out - would cost more than the bike...and I really can't be bothered taking it to pieces....I was considering buying a lot of masking tape covering the break cables pedals gears chain etc to protect them then just roughly sanding it and spraying it a another colour. To my mind so long as she'll use it it doesn't matter if it looks slightly shoddy as that'll make it less of a theft target. I've had six bicycles and three 125cc scooters stolen in my time (joys of no garage) so anything to reduce that risk prob welcome. Will that corner cutting lazy method work? was thinking base coat and perhaps two shades of green to give a camo look then clear coat... My main concern is that around the masking some of the blue on and red may show through. Won't bother me but get the feeling my other half might still refuse to ride it thereafter as a result. Myself I couldn't care less. Other concern is messing up the moving bits if my lazy masking fails... But really don't want to take it completely to bits!!
masking all the parts is a not lazy work, actually it's more hard work to do just to mask all the parts, but its not a smart move for me, and also if the paint job does not come clean, your partner will still refuse to use it but taking off all the parts and paint the frame only is much more better, by doing it you can have a better coverage all over the frame, painting is not as easy as 1 2 3, but I suggest do a flat black paint job thats the easiest paint job for me to do or any plain color with matte finish paint job
kung shifter cable lang naman mga nakainternal, huhugutin mo lang un pero kung ung hydraulic cable ang nakainternal, hinuhugot ko sa caliper para makapasok sa internal routing at mahugot palabas ng frame, medyo mababawasan lang ung oil
pwede kaso wag mo na asahan na makapit ung pintura, sa simula ng pagpipintura, mahalaga ang preparation kasama ang pagliliha kasi yan magiging pundasyon sa kabuoan ng paint job
Hi sir anong recommended nyong grit to even those paint reactions? Sobrang helpful ng vids nyo kasi i'm torn between getting my frame sandblasted or mag-stripsoll nalang ako w/c is medyo toxic naman. Hehe
salamat po 600 to 800 para fine lang ung scratches hanggang mahabol ulit ung kinis yup medyo toxic nga at masakit sa balat kaya minsan mas ok pa talaga kahit lihain nalang may kamahalan din ata magpa sandblast
Ganda idol 😍 Pano kapagka napinturahan na ng Samurai/Bosny paint idol, yun ba pwedeng hindi na gamitan ng paint remover? Pwedeng lihahin na lang ng maayos idol?
kung bago nirepaint eh strip to metal na sa tingin ko ok lang naman, pero kung dating hindi din tinanggal ung pintura mas ok siguro na tanggalin nalang kasi lalong kakapal lang ung mga layer ng pintura
Lods, ganda ng repaint! Tanong lang din lods, naliha ko na ng 220 grit ang akin, pero medyo glossy pa din siya. Okay lang ba yun? O kailangan maging flat ang kulay nya?
@@chrisworxcustoms okay lang po ba na kapag napatungan ko na yung primer ko po ng top color. Sa susunod na naman yung isang color pa po? Balak ko kasi red and black po. Red pa lang meron ako at inaantay ko pa po yung black tska stickers na inorder ko po. Makaka affect ba yun sa magiging outcome ng pag rerepaint ko po? Thankyou po sa walang sawang pagsagot sa tanong ko!
@@chrisworxcustoms while that's true, I don't want to take the chance on effing up my bike by being unable to reassemble it 😂. Maybe you can do a video on "bike disassembly".
Maraming salamat sa patuloy na pagsuporta, patuloy lang na mag like, share at mag subscribe sa aking channel mga kaBaga puwede din kayong mag send ng message sa aking FB Page m.facebook.com/chrisworxcustoms/?ref=page_internal&mt_nav=0 para sa magtatanong kung saan location ko sa Maybunga Pasig po ako
Iba talaga ung Pinoy na gaya mo idol "madiskarte" at "resourceful" keep it up & God bless.
maraming salamat po🙏
Cool bro, planning to repaint my mtb, thanks for this!
you're welcome👍
good luck👌
ganda, parang bagong bili lang ulit yung bike, recommended painter idol 💪
maraming salamat😊
Gumanda ah!
salamat😊
Wow, This is a great mtb video! I believe in you, you just earned a new subscribers
thank you for your support😊🙏
Sana oll mahusay
nahasa nalang din😊
Oo ng sna all marung gusto ko Sana pinturahan din yung akin kaso baka magkamali
angas talaga 🤘💪
salamat😊
Love the beats on the video.
Sick video thanks for sharing
thanks for watching
lupet boss…peede pag mag aasemble ako pa repaint ko sayo
Lufffeet mo boss lodi. Iba ka!
salamat😊
Ganda ng logo sir ah😉👍
salamat po😊
nice super more plss
Galing Lods
salamat😊
Well done ! 😊👍
thanks🙏
Ang lupet
Umaangas lalo editing nyo sir.
uy salamat po sa pagnotice😊
😅kakapractice din siguro, kakasearch ng bagong ideas, ganon lang naman sa buhay dapat araw araw nagiimprove👌
@@chrisworxcustoms hehe madalas ko kasi panoorin mga videos nyo sir kaya alam ko kung ano nag babago sa ginagawa nyo. hahaha
Yes naman sir ✌️
@@jaysonlustico2911 maraming salamat sa iyong pag suporta kabaga🙏
I got the cheapest mountain bike I could find and my other half refuses to use it as she doesn't like the blue and red colour scheme. Not worth the effort paying lots of money to sort it out - would cost more than the bike...and I really can't be bothered taking it to pieces....I was considering buying a lot of masking tape covering the break cables pedals gears chain etc to protect them then just roughly sanding it and spraying it a another colour. To my mind so long as she'll use it it doesn't matter if it looks slightly shoddy as that'll make it less of a theft target. I've had six bicycles and three 125cc scooters stolen in my time (joys of no garage) so anything to reduce that risk prob welcome. Will that corner cutting lazy method work? was thinking base coat and perhaps two shades of green to give a camo look then clear coat... My main concern is that around the masking some of the blue on and red may show through. Won't bother me but get the feeling my other half might still refuse to ride it thereafter as a result. Myself I couldn't care less. Other concern is messing up the moving bits if my lazy masking fails... But really don't want to take it completely to bits!!
masking all the parts is a not lazy work, actually it's more hard work to do just to mask all the parts, but its not a smart move for me, and also if the paint job does not come clean, your partner will still refuse to use it
but taking off all the parts and paint the frame only is much more better, by doing it you can have a better coverage all over the frame,
painting is not as easy as 1 2 3, but I suggest do a flat black paint job thats the easiest paint job for me to do or any plain color with matte finish paint job
I like the diy stencil
thank you🙏
Kuya kailangan pabang iron Ang derailleur
anong iron ang gagawin mo sa derailleur?
same steps lang ba kapag spokes ang ire-repaint sir???
yup same
kaso sayang paint at oras sa pagrerepaint ng mga spokes
iisaisahin mo pa yan
bili ka nalang nung may kulay na spokes
Anu po ggwin pg may na chip off na pintura..?
kung kaya mo iretouch pwede naman
Can we do without removing parts
if you have lots of time and effort to just mask the parts that won't be painted then go
Thanks allot i guess
boss nag rerepaint ka pa rin ba?
may vid ba kayo yung mga internal cabling kasi mtb ko pano alisin hihi sana mapansin parin..
kung shifter cable lang naman mga nakainternal, huhugutin mo lang un
pero kung ung hydraulic cable ang nakainternal, hinuhugot ko sa caliper para makapasok sa internal routing at mahugot palabas ng frame, medyo mababawasan lang ung oil
Idol pwede ko po ba gawin yan no remove old paint tapos gagamitin kong pang kulay bosny?
yes po, ito ung link ng bosny version th-cam.com/video/FLEg92cG5zE/w-d-xo.html
@@chrisworxcustoms salamt po lodi dami ko natutunan sayo ☺️💪💪
walang anuman po, salamat din sa suporta
nice ganda ng bike angas astig lupet
Pano mo po ginagawa yung stencils . ano po mga materials ?
kung napanood niyo ung video
pinakita dun mano mano lettering, tapos cut ng cutter
vinyl stickers gamit
LODS ANOPONG UNA ILAGAY KASI ARMY GREEN PO GUSTO KONG KULAY
Applicable ba ung intervals kso compressor nd can?
sorry not sure pa ako sa process ng spray guns eh
nood nalang po muna kayo tutorial paano gumamit sa spray gun / compressors
Okay lang po ba kahit hindi na matanggal dati nyang paint?
Magtatagal po ba.
ok lang liha lang, basta stock paint
walang tatagal kung hindi din iingatan
Pero pwede ba mag spray na hindi nilihaan?
pwede kaso wag mo na asahan na makapit ung pintura,
sa simula ng pagpipintura, mahalaga ang preparation kasama ang pagliliha kasi yan magiging pundasyon sa kabuoan ng paint job
Pwede ko bang gawin yan sa Trinx ko? Pangit na kasi ang pintura nun?
pwede naman depende naman sayo kung anong design gusto mo gawin
@@chrisworxcustoms pero Pwede rin naman po syang walang design di ba?
boss, anong masilya ang pwede gamitin para sa alloy? ok nba yung polituff?
kung maliliit lang, kahit ung epoxy steel ung kulay itim para madali matuyo
@@chrisworxcustoms salamat boss, sana magkaroon ka ng blood splatter effect na project.
sana may magpagawa
Kuya ano pong material yung ginamit niyo pang dyi stencils? Gusto ko din po matutunan gawin
vinyl stickers, basta hindi matapang o makapit ung stencils
Lods pwede mahingi Ng mga color code Ng ginamit mo na paint ty
Can u use normal spray cans or do you need special ones
yes as long as you prepare the project properly so the paint will have better adhesion on the surface
How did you made the stencil?
by drawing onto the sticker and cutting manually
Boss pwede ba primer lng ilagay tapos wala ng secondary paint clear spray na agad pagtapos ng primer
puwede naman kung trip mo kulay ng primer, tapos clear na agad
depende na sayo un sir
Ah ok boss salamat trip ko kasi ung primer n kulay gray hehehe ung nlang cguro tapos clear n agad thnx po lodi..
Lods kasya na tigiisang bote lang lahat? isang bike. Salamat
tig 2 cans primer, main color, clear
1 para sa details
mahirap mabitin sa kalagitnaan ng pagpipintura
Idol ano po gamit niyo na sticker?
vinyl stickers po
@@chrisworxcustoms bukod sa vinyl sticker idol ano pa pwedeng gamitin na sticker para sa repaint
vinyl stickers lang pero dapat hindi makapit ung dikit
mas mabuti kung manipis na parang tape na
Hi sir anong recommended nyong grit to even those paint reactions?
Sobrang helpful ng vids nyo kasi i'm torn between getting my frame sandblasted or mag-stripsoll nalang ako w/c is medyo toxic naman. Hehe
salamat po
600 to 800 para fine lang ung scratches hanggang mahabol ulit ung kinis
yup medyo toxic nga at masakit sa balat kaya minsan mas ok pa talaga kahit lihain nalang
may kamahalan din ata magpa sandblast
Ganda idol 😍
Pano kapagka napinturahan na ng Samurai/Bosny paint idol, yun ba pwedeng hindi na gamitan ng paint remover? Pwedeng lihahin na lang ng maayos idol?
kung bago nirepaint eh strip to metal na sa tingin ko ok lang naman, pero kung dating hindi din tinanggal ung pintura mas ok siguro na tanggalin nalang kasi lalong kakapal lang ung mga layer ng pintura
@@chrisworxcustoms hmm make sense, thank you sa walang sawang pag sagot sa mga tanong ko idol 😇
@@JoKeR-qk9ev walang anuman
How can I repaint my se bike without taking it apart ?
if you can't take off all the parts, you must do the hard work by masking and covering the parts that wont be painted
What happens if I just tape the stuff I don’t want painted
paint will build up around the masked area and if you removed it will be like engraved
but you can smoothen or level them together using clear coat
Do you offer paint jobs?
yes, message nalang po sa FB page kung anong gagawin
Ilang grit po yung ginagamit nyo na sand paper?
180 to 240 sa simula
800 to 1000 pag may pintura na
ito ung vids ko about sa sandpaper
th-cam.com/video/rywIIQTYr9M/w-d-xo.html
What is the top speed? 🚴
that depends with the owner
Lods, ganda ng repaint! Tanong lang din lods, naliha ko na ng 220 grit ang akin, pero medyo glossy pa din siya. Okay lang ba yun? O kailangan maging flat ang kulay nya?
lihain mo pa para mas sure, mahirap din kasi maghabol pag may pintura na
@@chrisworxcustoms okay lang po ba na kapag napatungan ko na yung primer ko po ng top color. Sa susunod na naman yung isang color pa po? Balak ko kasi red and black po. Red pa lang meron ako at inaantay ko pa po yung black tska stickers na inorder ko po.
Makaka affect ba yun sa magiging outcome ng pag rerepaint ko po?
Thankyou po sa walang sawang pagsagot sa tanong ko!
basta kung matuyo ng more than two hrs
mas maigi na lihain muna ulit bago patungan ng pintura
para mas makapit ung susunod na ipapatong
I would love to repaint my bike, but disassembling it is too daunting. I fear I may be unable to reassemble it and end up with an unusable bike.
you won't know it until you try it
@@chrisworxcustoms while that's true, I don't want to take the chance on effing up my bike by being unable to reassemble it 😂. Maybe you can do a video on "bike disassembly".
most of my recent videos concist of disassembling to repainting to re assembling the whole bike again
you might want to check it out
@@chrisworxcustoms Will do, and perhaps I will gain the courage and know-how to do it. Thanks.
Magkano Pa repaint sir
depende sa kulay at design
Sanaol marunong mag tanggal😭
madali lang naman kung gugistuhin at pag aaralan👌
basta kumpleto sa tools👍
Magkano po magpa repaint location po
Maraming salamat sa patuloy na pagsuporta, patuloy lang na mag like, share at mag subscribe sa aking channel mga kaBaga
puwede din kayong mag send ng message sa aking FB Page
m.facebook.com/chrisworxcustoms/?ref=page_internal&mt_nav=0
para sa magtatanong kung saan location ko
sa Maybunga Pasig po ako
Wow this is ALOT TO DO😥
Boss! Ito ba yung metal primer na ginamit mo? shopee.ph/product/81608331/5480801041?smtt=0.85624920-1626265437.9
yup dati, mas ok ung Do It Etch Primer lalo na pang aluminum