How to Replace Engine Drive Belts 96-04 Nissan Pathfinder
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- Buy Now!
New Serpentine Belt from 1AAuto.com 1aau.to/ia/NSES...
1A Auto shows you how to repair, install, fix, change or replace a broken, noisy, squeaky, worn or groaning serpentine belt. This video is applicable to the 96, 97, 98, 99, 00, 01, 02, 03, 04 Nissan Pathfinder
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oyc/1AX...
• 10mm Wrench 1aau.to/oev/1AX...
• 14mm Wrench 1aau.to/oev/1AX...
• 14mm Socket 1aau.to/otn/1AX...
• 8mm Socket 1aau.to/oqA/1AX...
• Ratchet 1aau.to/oyg/1AX...
• Socket Extensions 1aau.to/otn/1AX...
• Torque Wrench 1aau.to/og4/1AX...
• Rust Penetrant
For More Info visit us at 1aau.to/h/Ym/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![일상 속 기분 좋음 [Proto disco meme]](http://i.ytimg.com/vi/DwmEIaZ7XGQ/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
This video saved my bacon, lost both power steering and a/c belt. Replaced all 3 belts with great thanks to your mechanic, who explained the process perfectly.
Regards
Same here. This video saved my skin!
Just got this truck today. Guy who sold it to me helped change it. And it was in the end. In upside down. But I also wasn’t aware of the bleed method. This video literally saved me. Amazing. Well explained. Very cut to the chase. Awesome man. When I do more work I’ll be back to see more. #subscribed
+@bobbyswanson8047 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Been couple of years now but replaced all my belts and pulleys just now Dec 2021. Your instructional video was so helpful. Thanks.
00:16 Parts List
00:27 Opening Hood
00:47 Disconnect Battery (10mm)
01:07 Remove Air Box and Filter, Attached Hoses and Sensor Connectors (Flathead Screwdriver or 8mm, Pliers)
03:27 Remove Lower Splash-shield (10mm)
04:38 Remove Lower Half of Radiator Fan Shroud (May need Long Flathead Screwdriver)
05:54 Remove Upper Radiator Hose, Reservoir Hose (Rust Penetrating Fluid, Wide Pliers, 10mm)
07:26 Remove Upper Half of Radiator Fan Shroud (10mm)
08:38 Loosen, Remove, Label AC Belt (14mm)
10:17 Loosen, Remove, Label Alternator & Water Pump (Drive) Belt (14mm, 12mm)
11:36 Loosen, Remove, Label Power Steering Pump Belt (12mm)
13:16 Reinstall and Tighten Power Steering Pump Belt (12mm)
14:11 Reinstall and Tighten Alternator & Water Pump Belt to 1/4in of Deflection (12mm, 14mm)
16:14 Reinstall and Tighten AC Belt to 1/4in of deflection (14mm)
18:01 Reinstall Upper Half of Radiator Fan Shroud (10mm)
19:18 Reinstall Upper Radiator Hose, ensure tight fit (10mm)
19:57 Reinstall Throttle Cable into Brackets
20:12 Reinstall Air Filter, Air Box
20:49 Reattach Smaller Hose,closest to windshield, to Air Box
20:52 Reattach Coolant Reservoir Hose
21:06 Reattach Air Box Snorkel, Breather Hoses (Pliers, Flathead Screwdriver or 8mm)
22:45 Place Hose in Bracket on Air Box Hose
22:49 Reattach Mass Air Flow Sensor to Air Box
23:27 Reinstall Lower Half of Radiator Fan Shroud
24:18 Reinstall Lower Splash-shield (10mm)
25:28 Reconnect Battery (10mm)
Close Hood, you're done.
Just going to add a couple things here. Be ready to drain out a decent amount of coolant so have some shop towels and a bucket at the ready. You can plug the hole with them once it slows down to a trickle, and hook the coolant hose facing upwards to stop more from pooling out. Also with my 2004 Pathfinder SE (Canadian) I did not have to remove the negative connector on the battery, or anything to do with the air box. Only the shroud. Last but not least there is only 2 belts for my model/engine type. Check to see how many you have before going to the parts store. The rest of the video was very helpful and 1A Auto is my go-to for a lot of how-to videos.
Thanks for your comment, I was confused because the video says applicable to models up to 2004 but mine is a 2003 and it has only 2 belts as well. I suppose they're working on a 3.3 and not a 3.5, like our models have.
@@Labios_Rotos Glad I was able to help out! Figured I could save the trouble for someone else 👍
Is it necessary to put the fan blade back on before you put all the belts on?
The link to the belt is only one belt . My 98 has 3 like the one in the video . Do yall sell all three ? Thanks
To change the belts only, they make this look way harder than is actually is ! Go under the bottom and remove the cover and you can adjust the belts from the bottom. Slide them over the fan from the top.
HELL MAN IiM JUST GLAD HE POSTED THIS VIDEO. IT SURE MADE THINGS EASIER FOR ME.
is it going to be exact same exercise for 3.3 L 2000 NISSAN XTERRA?
I have a 2001 Nissan Pathfinder 3.5 LE. It is not the same. I have no idea how to take off the AC belt that's connected to the crank. Any tips?
I have the same problem with my 01
same bro wtf
You may want to make a bit to tighten the bottom bolt on the AC belt tensioner because so one is going to forget it and have a bad day lmao?? Just sure it was a miss but maybe put in a text to remember otherwise great video. People create to many short cuts. I agree just pull the fan shroud. The tensioners are a real pain!! Thanks for the video. Regards,
Any know the torque specs for pulleys?
This is basically the same procedure for a 95 pathfinder just the alternator is on the right correct?
+Edgar Poe The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Do you hace a video on how to replace the conpressor ?
Did you ever get the compressor done?
just a quicker way i did it i just pulled belt through the fan let me slip a few steps
After replacing my belts, I'm getting a continuous whining sound. I've tried tensioning the belts more but it doesn't help. What could it be? Thanks
+Pedro Pozo We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I was having the same issue after I replace the belts. Located the noise to a tensioner pulley on the left hand side gave it some lube it quieted down a bit but came back I ended up replacing the whole idler pulley and it went away.
Question: Has the bracket for the AC compressor belt tensioner been cut, or modified to get to the tensioner bolt? Because on my '96 Pathfinder there's no way to get to that bolt without removing the whole cover.
Nevermind..... I got it.... 😂
At 8:39 it doesn't show the extra little cover over that tensioner bolt which also requires removing two more 12 mm bolts.
I replaced the belt ac belt but it’s squeaking at insane volume, I’ve tried tightening down the belt to give it a little flex but the noice doesn’t change, any tips!?
Ratpack Gaming I believe you need a new tensioner
I have Nissan pathfinder 2001 vg33e but engine belts size I do not know bought a pk 5 for crank shaft and air conditioning but crank shaft and power steering I do not know
Is this still duable even if the fan shroud is on
+Matthew R Thanks for checking us out. Not removing the fan shroud would make this repair much more difficult if not impossible to complete as it would be in the way of the belts you are trying to replace. Please let us know if you have any further questions, thank you.
Is this for 00 nissan xterra 2.4 applicable
Am I supposed to drain the coolent first before I do that or no ?
akaash raj no
My mechanic just replaced them, now it squeaks at every cold start, and car vibrates at red-light.
Probably not tight enough, been reading forums and have the same problem. Going to try and fix today will let you know if I figure it out
Engine timing belt 99 Pathfinder