Hello everyone, I would like to thank our friend very much. He worked hard and did it. The electronic parts used were used as they were. But there are bugs in the software. It was fixed especially in the time settings, it was constantly causing errors in the software part. A 330 ohm resistor was used when using the keys. It works stably.
I have my egg incubator built. I tried to type out your code from the video but it seems buggy. Maybe you have changed it since the video or I just suck at typing it out haha. I look forward to the INO file link. :)
I have a question, please. I use the same Dht22 sensor, but when I run the incubator for an hour or less, it tells me on the LCD display that the sensor is not working. Have you ever encountered this problem?
Hello Sir, I am not sure if you are still active on the above project: I can not see how you connect the rack centering limit switch, please can you do sketch diagram for it and also explain where you have positioned it maybe a photo of the really working system where you have put this switch will help. regards Joseph
thank you for this project, this project really interests me and I would like to carry it out please can you provide us with the wiring diagram of the components.
Hello Sir, I am not sure if you are still active on the above project: I can not see how you connect the rack centering limit switch, please can you do sketch diagram for it and also explain where you have positioned it maybe a photo of the really working system where you have put this switch will help.
Thank you for project here are my request if possible to assist:: Can you add RTC to maintain the hatching time in case of power down. Please add DS18B20 sensor to complement the DHT22 in case one goes faulty
...bro!..pang 3.27 subscribers here!!!!!!!! what if blockout occurred..will all the data, settings etc. be restored? If so, how about adding features/module?..We would love to watch it.......
im very sorry for my late response for your request, i couldnt respond to your emails right away because my laptop was stolen and all my files are in there... but now i have manage to retrieve some of my files tru internet including the file of this video download link of .ino files of this project: drive.google.com/drive/u/0/folders/1x9pm31RWJkGRFVut8SHFzbiZarufxlZO feel free to modify some codes of your own and let me know the results and hope for the best... thanks
Please can you assist as to why the Spin ( time between turning), does not reset to the original set period. ie when set to 1hr it will reset to some figures more than 1hr like 199:187:999hrs
Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P" eggicubator:14:10: fatal error: LiquidCrystal_I2C.h: No such file or directory #include "LiquidCrystal_I2C.h" ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. exit status 1 LiquidCrystal_I2C.h: No such file or directory This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
salamat bro, but one last pangutana bro...pde ba sa esp32?.......if so, what are the changes sa libraries bro?........salamat advance sa tubag !!!!!!!!!
error showing plz tell us how to solve Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P" eggicubator:14:10: fatal error: LiquidCrystal_I2C.h: No such file or directory #include "LiquidCrystal_I2C.h" ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. exit status 1 LiquidCrystal_I2C.h: No such file or directory This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
![How To Make Egg incubator at Home [using an arduino]](http://i.ytimg.com/vi/V97gfHygVhk/mqdefault.jpg)
![How To Make Egg incubator at Home [using an arduino]](/img/tr.png)
Apik mas projek mu... Penjelasane yoo lumayan lengkaaaaap... Suwun mas.
The closest to perfect I have ever seen! Congrats on the project and the video! Keep up the good work!
Thanks
Very good project and professional.
The code and diagram please on esaievmtn@gmail.com
@@racksthenoobtech9903 pls help me with updated code and schematics
Hello everyone, I would like to thank our friend very much. He worked hard and did it. The electronic parts used were used as they were. But there are bugs in the software. It was fixed especially in the time settings, it was constantly causing errors in the software part. A 330 ohm resistor was used when using the keys. It works stably.
ganda ng design nyo sir more project pa arduino based
Give us the library links. We will be very greatfull to you.
I will post the code link on sunday,,, im very sorry for the late post of the code of this project because my laptop was broken...
I have my egg incubator built. I tried to type out your code from the video but it seems buggy. Maybe you have changed it since the video or I just suck at typing it out haha. I look forward to the INO file link. :)
Hi sir , i want to build incubator plz send me the code to my email gamstair@gmail.com thank you.
Where did you post this?
Thanks
Where is the code
How many sundays have to go by before the code gets posted? haha I am waiting :)
Very nice, this is what I was looking for. Many thanks!
I have a question, please. I use the same Dht22 sensor, but when I run the incubator for an hour or less, it tells me on the LCD display that the sensor is not working. Have you ever encountered this problem?
Programming and constructing your own circuits while clipping your hand drawn schematics to a computer screen ^^
Hello Sir, I am not sure if you are still active on the above project: I can not see how you connect the rack centering limit switch, please can you do sketch diagram for it and also explain where you have positioned it maybe a photo of the really working system where you have put this switch will help. regards Joseph
Nice work good job po.keep safe always
Great work, please I need the circuit diagram of this project
thank you for this project, this project really interests me and I would like to carry it out please can you provide us with the wiring diagram of the components.
Thank you very much that helps alot. I appreciate it
Hello, I get this error "Compilation error: dht.h: No such file or directory" can you help me
Hello Sir, I am not sure if you are still active on the above project: I can not see how you connect the rack centering limit switch, please can you do sketch diagram for it and also explain where you have positioned it maybe a photo of the really working system where you have put this switch will help.
Is forced ventilation towards the incubator or taking the hot air out?
Thank you for project here are my request if possible to assist:: Can you add RTC to maintain the hatching time in case of power down. Please add DS18B20 sensor to complement the DHT22 in case one goes faulty
dht.h no such file or derctory erorr help me
How do you stabilize your temperature and humidity to be the same on all the racks/shelves. And how do equalize the ventilation to your incubator?
Brawo super robota
Nc project, but i want to know if this project lost power, will incubation time reset ?
...bro!..pang 3.27 subscribers here!!!!!!!! what if blockout occurred..will all the data, settings etc. be restored? If so, how about adding features/module?..We would love to watch it.......
galing sa ibang controller yan bro, kinahoy q lang
all settings are stored on eeprom, meaning kahit mawalan ng supply maibabalik pa din ang mga settings mo
im very sorry for my late response for your request, i couldnt respond to your emails right away because my laptop was stolen and all my files are in there... but now i have manage to retrieve some of my files tru internet including the file of this video
download link of .ino files of this project: drive.google.com/drive/u/0/folders/1x9pm31RWJkGRFVut8SHFzbiZarufxlZO
feel free to modify some codes of your own and let me know the results and hope for the best... thanks
How u code the hatch day, its days counter right?, Cause u look dont use RTC modul
Please can you assist as to why the Spin ( time between turning), does not reset to the original set period. ie when set to 1hr it will reset to some figures more than 1hr like 199:187:999hrs
The errors have been corrected, I can send it if you want.
@@tugcenahsap5383 Pode me enviar a correção para a contagem regressiva?
@@tugcenahsap5383 Por favor como fazer a correção?
Sir what about the exhaust fan?
If the temperature increases then what will happen? How it will get decrease
Hi its a very good project.can i use this project with 16X2 display?
error: expected primary-expression before '.' token
How do correct the for-mentioned error
Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P"
eggicubator:14:10: fatal error: LiquidCrystal_I2C.h: No such file or directory
#include "LiquidCrystal_I2C.h"
^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
exit status 1
LiquidCrystal_I2C.h: No such file or directory
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Do you have full tutorial in wiring? I want to make one
schematic is in the video
Yes
I also
I also want schematic po, can't understand the schem on the video...I mean the pinouts and signals...
What is maximum number of egg can be used with this setup?
salamat bro, but one last pangutana bro...pde ba sa esp32?.......if so, what are the changes sa libraries bro?........salamat advance sa tubag !!!!!!!!!
Nice work. Congrats. Would be great if you could send me the code and schematic diagram
i would like to add 4x4 keypad, ac power supply backup and transfer of data to a cell phone every 5min...please help
How do physically position centre switch, please can you resend the code without a bug.
Can I get the circuit diagram
Good job boss!!
Thanks
@@racksthenoobtech9903 Would you share the code and diagram with me? BLLERGL@gmail.com
Is it possible to set the incubation days, for more or less than 21 days?
you xan set 1 to 45 days
When the fan will stop??
What are the materials sir?
Hello, sir! Please,I want if it's possible to give the schematic diagram of this project and how can contact you?On Whatsapp or mail?Thank you!
Can you show me the code
may clear diagram ka p nito sir slmat
Can you make one project for me
This is really awesome...im going to make an incubator based on an arduino now....thanks a lot and pliz share the code
download link of .ino files: drive.google.com/drive/u/0/folders/1x9pm31RWJkGRFVut8SHFzbiZarufxlZO
please can you send me the sketch code for the incubator/hatchery
Code is in the description
@@racksthenoobtech9903 code showing many erorrs why
@@sarojmikubehera5039 YEs
@@sarojmikubehera5039 i have also some errors
bro please share ( LiquidCrystal_I2C.h & dht.h ) library .....
Thank you
realy amazing project please give me the codes to try this project
Sir please give me a clear copy of your schematic thanks..
error showing plz tell us how to solve
Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P"
eggicubator:14:10: fatal error: LiquidCrystal_I2C.h: No such file or directory
#include "LiquidCrystal_I2C.h"
^~~~~~~~~~~~~~~~~~~~~
compilation terminated.
exit status 1
LiquidCrystal_I2C.h: No such file or directory
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Please provide the libraries used in this project.
Also please update us if there are any development upgrades in the existing code.
Thanks a lot.
NICE
Please share libraries
Genius..
Nice
code pls :) nice work
Library package please
lcd was not declared in tis scope
Awesome
plz sir corect code its very nice project i need it so much put code is alot of erorr
excellent project, please send me a code file
download link of .ino files: drive.google.com/drive/u/0/folders/1x9pm31RWJkGRFVut8SHFzbiZarufxlZO
Baka pwedeng makahingi ng library files nyo sa arduino boss 🥲
libraries please
Post the code ??
Good luck. Can you share the code please?
please libraries
নাম্বার দেন
show.
Skematic diagramnya ga di upload broooooo, atau kirim ke mahsunrozy@gmail.com, makasih broooo