I agree with the other guys. In that material the bucket should be peaked to the back every time. Keep the bucket flat and on the deck when you go into the pile, roll the bucket FORWARD and back to load it. Train the truck to be 10-45* from your pickup line. A lot less steering involved faster loading. You hit a rut with your loaded bucket up in the air, you’ll wind up on your side. You could get another bucket on those trucks, load the front to the top of the box then work your way back until it runs off the back. If it’s got a diff lock use it when you go into the pile
Man if would stop curling as soon as he hits the pile and drive in and boom up then curl he could get a full bucket I'm surprised the Forman wasn't going crazy with all those half buckets
Man is his name Willie half bucket should have loaded that dumper with two buckets when I first started I would be ridiculed if I had half a bucket from my old man that's how I learned getting it tight from my dad
If you go in with high rum pull you're just going to slip tires all day. Trust me, it makes for a long ass day when you constantly have to repair the ruts from tire spin. Even though he's only grabbing half buckets, it makes up for time in floor maintenance. But again, computer expert, your secret is safe with me. SMH
Thanks for this nice filming 👍
You're very welcome! Thanks for watching ✌️.
I agree with the other guys. In that material the bucket should be peaked to the back every time. Keep the bucket flat and on the deck when you go into the pile, roll the bucket FORWARD and back to load it. Train the truck to be 10-45* from your pickup line. A lot less steering involved faster loading. You hit a rut with your loaded bucket up in the air, you’ll wind up on your side. You could get another bucket on those trucks, load the front to the top of the box then work your way back until it runs off the back. If it’s got a diff lock use it when you go into the pile
Man if would stop curling as soon as he hits the pile and drive in and boom up then curl he could get a full bucket I'm surprised the Forman wasn't going crazy with all those half buckets
It would be easier to do with a taller pile but still no excuse for half buckets
Loaders have come along way. That's a nice loader. Great video brother 👍✌️
Finally caught her in action Travis. I've been after her since April. Definitely a nice piece! Cheers brother and thanks for the support ✌️.
@@HeavyMachinesinAction ты не умеешь работать. Неправильно ставишь машину, набираешь ковш когда рама сложена и прочее.
I am thinking of getting the 1/14 versions of this and was looking for a RC version haha ;D. Nice tosee the 1:1 and hear them.
Ole half bucket Henry here could easily load them trucks with 2 heaping buckets in that beast of a loader!!!
Maybe if he had something to push into but there's not much of a pile left. It's okay computer expert I won't tell
Nice job 👌
Thank you Adrian.
Nice 👍🏻
Thank you buddy ✌️
Good job acclumating to your working environment and realizing you can't run full torque all the time. Let the haters hate. Nice video!
Nice video, I run the same loader at a sand wash plant in wet/soft conditions and can get full buckets…. Not sure why this operator can’t….?
Cat memang luar biasa
Man is his name Willie half bucket should have loaded that dumper with two buckets when I first started I would be ridiculed if I had half a bucket from my old man that's how I learned getting it tight from my dad
👍👍
Thanks Scruffy ✌️.
Hola mi maquina faborita cargador frontal interesante inportante saber operarla .
Buckets are half full no idea ..positioning is wrong could fit another bucket on that start at front ...next operater
I'd fire this operator!!! Half buckets are a waste of time and loss of productivity
If you go in with high rum pull you're just going to slip tires all day. Trust me, it makes for a long ass day when you constantly have to repair the ruts from tire spin. Even though he's only grabbing half buckets, it makes up for time in floor maintenance. But again, computer expert, your secret is safe with me. SMH
@@AllPowerGMC2500 it just takes skill and some people have it and some don't this guy don't
I think that cat 988 is to large for that. Shouldn't have went larger than a 980