“Did you clean your room”😂
I really liked this video and I couldnt stop laughing when you forgot to put the chain on the back wheel
38:37 Your brake line cable is out of the barrel from the trigger, make sure it's in properly and your brakes will work much better, hopefully everything gets better
Bro im so glad that I ZEALOUSLY, OBSESSIVELY went through as many youtube videos from channels like Parktool before i ever tried to service my own bike ive had multiple learner bikes and ive let all of them slip from me one way or another… but i’ve learned enough to know what he’s doing is- futile. Thumbnail made me think he was gonna get a new fork bars and seatpost and then i realized how dumb that was he’d also have to do a complete drivetrain switch to single speed if he really wants to achieve that wheelie bike feel but at that point you’re reaching the investment amount equal to just buying a complete from a mid range brand
Y’all gotta let the dude enjoy himself goddamn
So I was expecting a single speed conversion but you really just pimped out a mountain bike
Same lmfao 😭😭 like i was thinking new fork bars and seatpost but his just flashed out a walmart ride
Fast Ripper multi speed setup is killer... he'd got it halfway there. Needs new forks and bars...matching front tire...
next time you should just take off all the gears so it is a durt jumper bike which is the same thing as a mtb wheelie bike. plus it would look cooler
I like the colourful red look of the big ripper but cant wheelie and dont care about learning, so i just used my old mtb, wrappd red duct tape around the frame and cleaned it up a bit. The thing was falling to pieces so i decided to just mess around with it 😅
Bro, you got potential. The fact you made and posted this video shows that you have the ambition to take the first step. But before you plan on taking ‘that bike’ to any kinda’ ride outs, there’s sooooooo much more you need to do to ‘that bike’.
Honestly, I thought he was going to mod the bike to make the transition look like the bikes in the initial video pic post. That's why I watched this video, because I wanted to see myself if he could pull it off, or if the build was possible. But like he said, for starters, he still needed to swap out the handle bar stem, preferably to a 40mm or 50mm mountain bike handlebar stem. Also you would probably wanna swap handlebars. If you plan on wheeling, go with a higher rise, like a 50mm. Most steering tubes on forks are compatible, or 1 1/8. So if you wanted to go with more of a BMX look, you could probably also put a BMX handlebar stem on there. If you do that though, you would have to pay attention to the width and rise of the BMX handlebars you would use. They can't be to high, or it will make for a funky feel and ride. The head tube on that bike looks like it's a 33mm, so you could swap out that headset with a cheap aftermarket one with sealed bearings. You would also probably want to replace those forks with some cheap air forks. Do your research and find the air forks that are the most durable and can handle the abuse you're going to put them through. You could probably use some rigid cruiser BMX forks too. But you would have to make sure they're compatible with the bike's frame dimensions, and the same size as your wheels. You also wanna swap out the 3X crankset for probably a 1X square taper or hollow tech crankset, with a 30T to a 34T chainring, your preference in cadence. You could change it to a single speed, or if you wanted to keep the gears, you could get a cheap aftermarket derailleur that should improve your shifting and peddling under load. If the chain keeps coming off, get a chain guide. He probably has mechanical disks brakes on that bike, so go ahead and buy a new brake set, and upgrade the brake calipers on there too, 2 piston if possible. And get some 2-finger brake levers. Upgrading the braking system will make for more responsive breaking, which you need for doing wheelies or trying to do tricks. You can go the hydraulic route, but if you're trying to do a build on a budget, hydraulic brakes can get a lil pricey and are tricky to install and adjust. A bike like that, you would probably need to pump $500 to $1000 into it to make it a solid hybrid BMX cruiser. But it could be done, and on a budget. Alot of parts are universal, or standard. You can still find alot of parts cheap, and any aftermarket part you can buy and install on a bike of this quality will probably be better and provide better performance than what came on the bike stock. Just take your time and turn it into a project that you could do over the course of maybe 1 to 2 years.
thanks so much im going to use this comment as a guide to my own build wich im starting around christmas i was wondering if you had a messaging platform so i could ask any questions i had about the build or i can just reply to your comment and ask questions either way thanks for the comment and help@@Muah_De3p
nice bro you deserve much more subscribers i wish u best of luck 🔥👍
Walmart bike better than a mafia 😂
@@angelabeattie3717 my friends one not that even old he bent the frame and my other friend snapped it
That ting looks clean
300 bucks for a bike from Walmart. Please don’t ever buy mass amounts of drugs then cuz they gonna take you
Return it to Walmart and film the content. Or just willy it off a Cliff!
no hay they sell rockriders in walmart lmaoo try the st520 its the n1 beginners wheelie bike here in spain
Nice build man
The bike likes good u should add new handle bars and add pegs and sticker kit
Is he okay after doing this 😶🌫️
pt2 would be rlly good
what bike is that?
just wider bars and recomend remove the front gears those are worthless
Nice charger and thanks for the asome vid
Are we not going to talk about the whole fact that his mother screamed at him
37:54 this should be the intro
dude lift the seat till you knee is allmost strate put bmx bars on and you will need longer gear and brake cables just to start with it will make it much better for wheelies bro
its funny how it said turning my walmart to an se and the wheelie bike was a mafia instead of an se [ the thumbnail ]
yo this might be a late comment but here's some things I reccomend doing/buying
1. buy a new fork, for the iconic "wheelie bike" look
2. take off the stickers on the bike
3. either take off the gears and make it a fixie or get a different gear shifer
4. get a disc brake conversion kit
this video was so good, u deserve a sub
What type bike ?
thats so cool!!!!! nice job
Nice! you can remove the front gears to have a 1x and change that ugly stem
It went together easily in less than an hour. th-cam.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
SE seats are hard as a brick😂
Get odi grips the se ones suck
And the seat clamp get it on ride out supply the one you got I had on my big ripper and it sucks the bolt is easy to strip
i liked and subscribed
Nice
Get maxxis hookworm tires the thickslicks suck especially in the wet the hookworm tires are the best and gripes the best everybody get hookworms in stead of slicks
That is not from wallmart its from DECHATLON
💯💯💯
I thought he knew what he was doing
Our new brakes on it a new headset new cranks spokes skins odi grips and boom ur bike should be good
you got the wheelie but just lean back all u got to do besides that fire bike
oh my fucking god bro, i was looking for weeks for a st100 modified aand couldn't find it thanks broooo
Bike name I can’t afford a wheelie bike
Gucci is Gucci and Prada is Prada
w vibes
Yo u should change the handle bars and put some se stickers
this shi outrageous
I’m hurting watching this but u need longer bars
You had zero fuck clue what your doing but still got it done
Bro gets aroused just from seeing new bike parts
Titus 2:11 for the grace of god offers salvation to all people to be saved in Jesus name Amen
"Aint no way im paying 1000 or 500 for a willy bike"💀💀
My friend got that bike but he turned it into a c100 but the thumbnail is a mafia not an se
yo i know this is a year ago but you leaked ur address on the package just wanna make sure in the future you cover it, if u move cus there are some menacing people out there
W
get red spoke skins
this hurts so bad to watch and i cant stop
Vid was heat
You definitely paid close to 500 between the pieces in the Walmart bike along so you didn’t really save my money unless you was referring to thousand dollars
I just copped a 20” bmx for $319 off sourcebmx 😭😭 sale from $399 barebones but a good start (again)
change the whole bars and gearing system
get wake handle bars
Bro was prob so high while making this video
Buena intención de repara su Bicicleta por algo se inicia pero sugiero que se istrulla más de algo se inicia
this is a swerve bike a wheelie bike got diff handle bars
Just go on city grounds they have se for 699
They siblings?
Se stem and bars please
1 thorn n that joint flat
shouldve gotten flangeless grips
That's a chenga mafia bike bro
Bro said se but put a mafia on the thumbnail
I thorn n it's done
This is looking nice slapping the tyre 😅
change the bars
el so maxxis hookworm bester than thickslick and cheap
You get what you pay for 😅
pot your bike seat higher thats how i learned quickly
34:11 we notice a LOT of things 😭😭😭
I'm not gonna hate on you I'm gonna do the same thing
accept for 1 minor detail just 1 tiny little fact its...... NOT A SE BIKE!!! and never will be nor be as good as one either so there is that little problem but hey i guess we all can dream from time to time and they might even seem real at times LOL
it just just worse the longer you watch 😭
Should of bought hookworms atleast
i got money to buy surron but no money to but se bike T-T
This vid is hurting me 😂
300 for that walmart bike is not a good deal
Fr, mafia bikes sells them the same price and they’re actually bmx bikes
Douse any one noticice the pink nails😂
SE grips are so bad, just get theory grips or ODI
Just buy a better bike with disk brakes and a good set of gears your going to die with those rim brakes
omg this hurt to watch lol and was also painful to watch you use the wrong tools on things too thank god the bike in only worth the the parts you put on it. But i man if that is not putting lipstick on a Pig or polishing a Turd i dont know what is LOL
hey man he's learning and instead of saying those hurtful words give his some advice on how to correct his mistakes
@@bradybmx3171 Your right i was a bit harsh but I just cant justify in my head putting those good parts on a bad and i mean VERY bad bike. im sure you can agree with me that Walmart bikes are really unsafe trash and i would never put my kid on one. so to see him throw money and good parts on this thing is hard to watch. I know the not having tons of money for the big cost of a SE Bike i get that as i am just now next month picking up my own Monster Quad from lay away in my local bike shop so i get it. but that is the way he could look into getting one too rather than wasting money ya know. and i also want to point out that the reason SE Bikes and other Wheelie bikes are much more easy to do the wheelies on is based on how the frame Geometry is designed that is another reason he is having in the video a hard time with popping it up even. honestly his safety on that death trap should be the first concern. then the cash he is throwing at it to make it something it can never be. but you are right i was harsh sorry kid i did not mean to be such a jerk. just really put some thought into your project maybe get a used BMX quality bike from a real bike shop to toss in some cash on parts you would be much better off and safer .... also yes im gonna say it the dirty words none of you like to hear but please when you get on the bike any bike " WEAR A HELMET PLEASE" you only have 1 melon so please protect it trust me you look much cooler on a bmx with a helmet than you will in a coffin ;) also when working on a bike either use a real wrench the proper size of the wheel nut or go to a website called Parktools and order the right bike tools and use those using a adjustable wrench on the bike can and will damage your wheel nuts good luck kid
My eyes hurt
This hurt towatch by an 300 dollar used please
the handle looks trash change the bar
The SE grips are bad bruh 😭
Two different bikes
Naahh man 😂
Take off the biggest and smallest sprocket and keep the middle, get rid of the front derailed completely and it will feel and look so much better