Hi Scott ! Basically a LTC Mode is MTC in this generally you have a software or a software plugin in a DAW seqvence (fps) the plus is those possible trigger points set as fps could more or less 30-65 since i know .More basically you use a "midi" command interface without using the actually midi interface protocol instead using timecode protocol !that trigger some commands via a software or a machine that can accept those commands mixers ,tape ,cd etc .is the same like for auto or lights ! in fact is the same because you can run multiple commands that can act as starting point or in progress in such way you want to program and to determine further actions that can split older commands or end up on a certain time ! that s a command end too. Honestly there is another way you can use time code and that s been dj time code.this one is a buzzing code fervently some tonal combination unto a cd dvd what ever that determine the user maneuverer of the user interface ! so that the command is called by touching certain buttons or adding certain gesture from the user! this is a NTC is a non linear timecode ! and the reaction like a shape of oval or similar ! i do not understand way people use Qlab maybe because is cheap and some parts free .But other daw have extended cheaper capabilities regarding timecode on all application also is easier to a user curve learning!
Thanks for the input! LTC (Linear Time Code) is different than MTC (MIDI Time Code), but you can get a converter that transforms one to the other. Either way, you're correct - there are a ton of uses for these.
I'm trying to send the SEMPT signal (WAV FORMAT) from our backingtrack player (CYMATIC) it starts running but timecode stops after 5 secs...do you have any idea what it could be?
I’m trying to learn more about Timecode... It seems that nobody has made a video explaining the signal itself - a lot of videos tell what timecode is used for... Will I be able to take the LTC signal regardless of cable types, and hook this up with different devices (using the appropriate connectors of course)..?
Hey Tom - Good point, I'll make a new video about that soon. LTC is an audio signal and can be passed just like any audio signal - regardless of connector type. You can even split it using a y-split cable if you want. Or, you can boost it or cut it at any Gain Stage. If the signal gets too low or too hot, though, you might run into problems.
MIDI is not as tight as SMPTE when accuracy is required. It loses datas here and there, it is unbalanced signal means very reactive to interferences such as jittering. It suffers of latency where SMPTE doesn't and this factor increases when long cable runs are needed or when you work with more complex systems. Other than that imagine sending MTC for light and sound and not everything just works fine... for audiovisual multimedia is crucial to work with SMPTE as it works highly accurate within the range of hh:mm:sec:fps. If you need only to send cues to move an audio console fader and programs then MIDI would be easier, yes.
Question 🙋♂️ this is a music 🎼 question 🙋♂️ when you listen 👂 to a album 💿 like r.e.m monster 👺 and when you put the cd 💿 into the cd 💿 player the song starts at 0:00 I don’t know 🤷♂️ what’s called for when the song 🎵 starts at 0:00 and it ends at a certain number like what’s the frequency Kenneth ends at 3:59 and by your side by tenth avenue north 4:02 and is the term is called time code or duration and are they the same or different?
@@theproductionacademy yes that’s true and I guess that’s why that music 🎼 people like r.e.m would always have to play their music from start to finish but yes what you said duration time code are pretty 🤩 much the same thing and I guess that’s why that music 🎼 probably start from beginning to the end because it’s how long or short a note is and then you have song tile to go with it and bam 💥 I solve my answer right there nd hopefully 🙏 you guys would definitely agree with me on that.
@@theproductionacademy that definitely make sense that music 🎼 like r..em what’s the frequency starts off at 0:00 and it ends at 3:59 amd it definitely is slow because it moves only 1 second per song and that’s it.
@@theproductionacademy I have a suggestion for you can you use one of my song 🎵 that I use for a example and use it for time code/duration/song structure like 10th avenue north by your side or r.e.m what’s the frequency Kenneth?
If it is able to use timecode, the mixer will typically have a dedicated LTC input. If there isn't one, then the mixer probably isn't able to use timecode to trigger events.
Hello! Really just wondering where does the audio time code send come from? Is that a specific piece of audio that triggers smpte I’m just confused and need this information for a show. Hope to hear back
For this example, the time code audio was actually recorded as an audio signal in our playback DAW (pro tools). The click track and backing tracks for the band were also in pro tools- so there’re always synced in the same session. When it’s all played back, the time code gets a separate output from the computer interface.
@@chrisechols3035 the time code is an audio file that we generated through an online time code generator. This file is imported into our DAW (ableton) and each song gets a specific hour number. So when the tracks are played back, the time code audio file also plays along.
Thanks so much for taking the time to make this. Really helpful for our upcoming tour.
What tour are you doing? What's the setup like?
Hi Scott ! Basically a LTC Mode is MTC in this generally you have a software or a software plugin in a DAW seqvence (fps) the plus is those possible trigger points set as fps could more or less 30-65 since i know .More basically you use a "midi" command interface without using the actually midi interface protocol instead using timecode protocol !that trigger some commands via a software or a machine that can accept those commands mixers ,tape ,cd etc .is the same like for auto or lights ! in fact is the same because you can run multiple commands that can act as starting point or in progress in such way you want to program and to determine further actions that can split older commands or end up on a certain time ! that s a command end too.
Honestly there is another way you can use time code and that s been dj time code.this one is a buzzing code fervently some tonal combination unto a cd dvd what ever that determine the user maneuverer of the user interface ! so that the command is called by touching certain buttons or adding certain gesture from the user! this is a NTC is a non linear timecode ! and the reaction like a shape of oval or similar ! i do not understand way people use Qlab maybe because is cheap and some parts free .But other daw have extended cheaper capabilities regarding timecode on all application also is easier to a user curve learning!
Thanks for the input! LTC (Linear Time Code) is different than MTC (MIDI Time Code), but you can get a converter that transforms one to the other. Either way, you're correct - there are a ton of uses for these.
Thank you sir for your packaged information
I'm trying to send the SEMPT signal (WAV FORMAT) from our backingtrack player (CYMATIC) it starts running but timecode stops after 5 secs...do you have any idea what it could be?
Well done
I’m trying to learn more about Timecode... It seems that nobody has made a video explaining the signal itself - a lot of videos tell what timecode is used for...
Will I be able to take the LTC signal regardless of cable types, and hook this up with different devices (using the appropriate connectors of course)..?
Hey Tom - Good point, I'll make a new video about that soon. LTC is an audio signal and can be passed just like any audio signal - regardless of connector type. You can even split it using a y-split cable if you want. Or, you can boost it or cut it at any Gain Stage. If the signal gets too low or too hot, though, you might run into problems.
Thank you for sharing this was more helpful then you think!!
Glad it helped out! Tell me what you want me to talk about next...I'll make more videos.
Wouldn't be easier if protools, for instance, send midi events to light systems to trigger scenes?
MIDI is not as tight as SMPTE when accuracy is required. It loses datas here and there, it is unbalanced signal means very reactive to interferences such as jittering. It suffers of latency where SMPTE doesn't and this factor increases when long cable runs are needed or when you work with more complex systems. Other than that imagine sending MTC for light and sound and not everything just works fine... for audiovisual multimedia is crucial to work with SMPTE as it works highly accurate within the range of hh:mm:sec:fps. If you need only to send cues to move an audio console fader and programs then MIDI would be easier, yes.
@@RiccardoMenegonAudioDesignerthanks!!
GRACIAS...
Question 🙋♂️ this is a music 🎼 question 🙋♂️ when you listen 👂 to a album 💿 like r.e.m monster 👺 and when you put the cd 💿 into the cd 💿 player the song starts at 0:00 I don’t know 🤷♂️ what’s called for when the song 🎵 starts at 0:00 and it ends at a certain number like what’s the frequency Kenneth ends at 3:59 and by your side by tenth avenue north 4:02 and is the term is called time code or duration and are they the same or different?
Hey Luke - that's the duration of the track you're talking about. Time code is a string of numbers we use to sync multiple devices in production.
@@theproductionacademy yes that’s true and I guess that’s why that music 🎼 people like r.e.m would always have to play their music from start to finish but yes what you said duration time code are pretty 🤩 much the same thing and I guess that’s why that music 🎼 probably start from beginning to the end because it’s how long or short a note is and then you have song tile to go with it and bam 💥 I solve my answer right there nd hopefully 🙏 you guys would definitely agree with me on that.
@@theproductionacademy that definitely make sense that music 🎼 like r..em what’s the frequency starts off at 0:00 and it ends at 3:59 amd it definitely is slow because it moves only 1 second per song and that’s it.
@@theproductionacademy I mean and.
@@theproductionacademy I have a suggestion for you can you use one of my song 🎵 that I use for a example and use it for time code/duration/song structure like 10th avenue north by your side or r.e.m what’s the frequency Kenneth?
on what input does ltc signal go to the audio console?
If it is able to use timecode, the mixer will typically have a dedicated LTC input. If there isn't one, then the mixer probably isn't able to use timecode to trigger events.
@@theproductionacademy ок, .thanks..or use ltc to mtc tranceiver..
Hello! Really just wondering where does the audio time code send come from? Is that a specific piece of audio that triggers smpte I’m just confused and need this information for a show. Hope to hear back
For this example, the time code audio was actually recorded as an audio signal in our playback DAW (pro tools). The click track and backing tracks for the band were also in pro tools- so there’re always synced in the same session. When it’s all played back, the time code gets a separate output from the computer interface.
@@theproductionacademy Im mostly confused on what are you recroding for the time code? where is that source coming from
@@theproductionacademy Can the audio be any file as long as it aligns with everything?
@@chrisechols3035 the time code is an audio file that we generated through an online time code generator. This file is imported into our DAW (ableton) and each song gets a specific hour number. So when the tracks are played back, the time code audio file also plays along.
fuck bro you scared me
the eyes T-T