Nice mods.... I'm thinking of adding those inclined raisers.... do you feel the handling same as before? Does the handlebar seem heavy for handling after its been installed? Add the fork gators also to your motorcycle.... it'll look even better
Hi bro i purchased the same Meteor windshield, but your clamps looks different. Did you use some different clamps? because meteor's one are not direct fit on cb350.
Great Video, I appreciate your effort. Can you let me know from which shop in Bangalore you have bought and installed the fog lamps and the rear tyre hugger?
@@smartfishingTony Thanks for the reply Bro. How is the fog light? Is it reliable? About the rear tyre hugger where you able to get two side fitted one. I think your's is one side fitted right? One of my friend was informed by the showroom that do not use rear tyre hugger as that might cause tyre alignment issue? What is your experience ?
Hi sir Great modifications and pretty nice video. Few questions please - 1. Can we put any back rest and top rack in the dual seat set up like BS Auto back with top rack ? 2. Also what happened to the BS Auto Bash plate ? Why did you remove it ? Any issues sir ? 3. Is the tyre hugger a must to have or can we manage with it also ? 4. Does the fog light serve the purpose or to go for any other fog lights ? 5. Does using the inclined handle extender cause any stress to the cables ? 6. What cable do you use for the mobile holder and charger ?
1 , not all fits perfectly, however adjustable, point to note is if you have cushion cover for seat then if u r taking a handle toprack like mine you need to check and understand your requirement, bs auto has one specific toprack for split seat, u just need to mention them its split seat 2 because zana crash guard bolt thread was locked so we couldn't remove that bolt to fit bash plate and we managed to fit second bolt down crash guard which decreased the gap between mudguard and bashplate, second reason it reduces ground clearance
4) fog lights is a must for outer city and highways, without street lights stock headlight strength is very less, we cNt use fog lights in city due to RTO rules
Hello Brother, Ton of thanks for this video. I see you installed one mud flap for the rear wheel and a mudguard extender in the front wheel. How is the mud coming in to the engine side and to the other parts of the bike after the installation. Is it worth installing it?
Immediately open the zana leg guard. I had an accident with cb350rs on 11th feb, this zana crash guard bend and hit my cylinder and broke the ring of the cylinder, and I had to change the cylinder of the bank, thanks to icici lombard for supporting me with the insurance claim.
'These are the few things I added..' he said.
But man, he added almost all accessories possible for highness. Lol 😂
😅😅
So you have used royal Enfield classic mirrors here? Is there any modifications required for fitting?
totally killed the aesthetics and the design language of the bike
Hi Tony, what about engine base plate, which one you bought and fitted well ?
Bs auto
Any cable route change required for inclined handle bar riser?
Nope
Fully tour ready! Nice one, Tony
Have you rerouted any cables while installing inclined handlebar risers?
How is the red color delux version look actually? Can I modify it like delux pro
Does the horn mounted on zana crash guard touch the indicator?
No
@@smartfishingTony can you make a small video on how it is mounted and showing clearly that it doesn't touch the indicator please
Nice mods.... I'm thinking of adding those inclined raisers.... do you feel the handling same as before? Does the handlebar seem heavy for handling after its been installed?
Add the fork gators also to your motorcycle.... it'll look even better
If u r 5"7 or less or gym person u can go for it
Well why it is used is it for smaller guys ?
What is your experience so far fixing aux light at the front suspension? Is there any problem(visibility) on bumpy roads?
No problem except there is a major angle gap between high beam and low beam in my fog lights
@@smartfishingTony Thank you
absolutely great effort , choice. Thanks for the links too
Is there any rusting issues?
Not much
Hi bro i purchased the same Meteor windshield, but your clamps looks different. Did you use some different clamps? because meteor's one are not direct fit on cb350.
Tonyopositive is my insta please share pics
Great Video, I appreciate your effort.
Can you let me know from which shop in Bangalore you have bought and installed the fog lamps and the rear tyre hugger?
Royal bike point jc road is the map location
@@smartfishingTony Thanks for the reply Bro. How is the fog light? Is it reliable?
About the rear tyre hugger where you able to get two side fitted one. I think your's is one side fitted right?
One of my friend was informed by the showroom that do not use rear tyre hugger as that might cause tyre alignment issue? What is your experience ?
Have you taken the extended warranty?
Installing fog lamp voids the Honda warranty?
I took, i ddnt checked about fog lights
How comfortable is the Sahara seat cover ?
So far so good, if city rides add rubber cushion, if only long rides add gel with seat
saddle stay is big one or small one?
One size available in bigwing
Bro honda said itll cut warranty for ceramic coating. And also will fog light cut electric warranty
Not sure about that
Hi sir
Great modifications and pretty nice video.
Few questions please -
1. Can we put any back rest and top rack in the dual seat set up like BS Auto back with top rack ?
2. Also what happened to the BS Auto Bash plate ? Why did you remove it ? Any issues sir ?
3. Is the tyre hugger a must to have or can we manage with it also ?
4. Does the fog light serve the purpose or to go for any other fog lights ?
5. Does using the inclined handle extender cause any stress to the cables ?
6. What cable do you use for the mobile holder and charger ?
1 , not all fits perfectly, however adjustable, point to note is if you have cushion cover for seat then if u r taking a handle toprack like mine you need to check and understand your requirement, bs auto has one specific toprack for split seat, u just need to mention them its split seat
2 because zana crash guard bolt thread was locked so we couldn't remove that bolt to fit bash plate and we managed to fit second bolt down crash guard which decreased the gap between mudguard and bashplate, second reason it reduces ground clearance
3) its good to have so others riding behind you will not get dirt
4) fog lights is a must for outer city and highways, without street lights stock headlight strength is very less, we cNt use fog lights in city due to RTO rules
5) slight stress but still loose , no rpm increase, they told donot reroute because it may bend more
6) i shared link in description
Hello I like your video.
Please share your experience of windshield at 90+ kmph. 🙏
If the helmet is open you can feel high windblast on ur face, if it has visor no issues
@@smartfishingTony thanks buddy. My nick name is also Tony. 😀😀
@@theframerr 🤠
Bro how you maintain matt colour green
Wash with only microfiber clothes ,dont use dirt clothes
Where did you buy the hook and how it's fitted ? Is it welded to pannier support?
Any bike parts shop, fitted in bikes screw hole only
Hi can give details of rear view mirrors like exactly which model of royal Enfield bike?
The normal one
@@smartfishingTony classic 350?
Can you have any rusting issue on your cb350
Not yet
Which RE mirror did you get ? Also was it a direct fit or were the bolts changed ?
Direct fit for one mirror , other one bolt changed strange 😅, chrome re mirror only I said to shop,
Nice very informative
Hi bro... BS Auto footrest is it good enough or should i wait for something good... and fog lights kerala.thil scene undo...
Keralathil scene aanu i think u can cover it day time
@@smartfishingTony ok bro...
Hi, From where you got installed handle bar risers in Bangalore?
Honda itself, u can buy from carbon racing online
@@smartfishingTony seat covers installation ?
ബ്രോ MVDയുമായി എന്തെങ്കിലും സീൻ ഉണ്ടായോ ഈ accessories കാരണം?
Sorry just saw this comment , im in karnataka
How is that hyperrider backrest.. Is it sturdy m strong..? Does it flex backwards when pillion leans on it..Want to buy.
I ddnt tried sitting behind 😅
@@smartfishingTony u can try... 😁😁
@@smartfishingTony is it sturdy n strong..?
Hello Brother, Ton of thanks for this video. I see you installed one mud flap for the rear wheel and a mudguard extender in the front wheel. How is the mud coming in to the engine side and to the other parts of the bike after the installation. Is it worth installing it?
Yes worth, however for rear near number plate go for two side support tyre hugger
@@smartfishingTony Thank you
Add padded gel coat covers
Bought highness nad made it meteor
it tyre hugger is useful?
Yes
Waiting for big boss review from you.
I just booked by cb350rs. Have deliver day after tmmrw
Congratulations
Please upload a long term review
Will do , just had 900kms
@@smartfishingTony Thank you
Am staying in banglore.. Can I come and see ur bike sir
Yes fine
Sir pls share ur contact number.. ಈ would like to see ur bike
wow, its Tour ready now, but 54k is way too expensive bro...
Including warranty,gears etc
Dnt worry He's money to spend...
If I had, I'd also modify my highness...
@@kalyanrai811 i sold my old bike to buy these 😅
@@smartfishingTony 🤣🤣🤣
Yeh Bhai bike sirf accessories ke liye buy Kiya hai..chalane ke liye nahi 😂🤣
Sir what is your hight
5.8
Immediately open the zana leg guard. I had an accident with cb350rs on 11th feb, this zana crash guard bend and hit my cylinder and broke the ring of the cylinder, and I had to change the cylinder of the bank, thanks to icici lombard for supporting me with the insurance claim.
What happened
After accessories bike looks ugly
Typical Malayalam English slang........
🤷
Sir where u took all accessories pls tell me or give ur number.. I'll discuss plss
There in the description
🌸 pքɾօʍօʂʍ