A torch will ruin molds. A heat gun doesn't get that hot, about 200° - much less than the oven, molds are designed to work in (up to about 450°). They're used for baking. A torch gets much hotter than that. Also, alcohol is bad for silicone molds, sorry to say. It will dry the mold out pretty quickly. The safest would be blowing through a straw. Next, would be a lighter, a heat gun, alcohol, then... that's all. A torch isn't even on the list. Also, a quick spray of mold release makes demolding easier and helps your molds stay shiny and last longer.
Wala aq masabi kundi 😲😲😲.. Napansin ko lng palaki n Community mo congrats po 😘😍.. Stay humble and generous as you share your ideas even the slightest but important on making resin projects,😊😊😊... Lets keep growing 😁😁😁
Thank you very much. You inspired me a lot to do resin work. I decided to open the shop on Instagram and Facebook and always visit your channel to see techniques I can apply. Many many thanks from my heart. ❤ Once you travel to Thailand, let me know if I can take care of you here. 😘😍
Thank you so much :) wish you good luck to your business ❤ Thailand is a beautiful country and I personally wanted to try the food there someday. Will surely let you know if I ever travel there. 😊
Don't see how I missed part 2 when I got a notification for this one. Anyway, your videos are so calming and will subscribe to your friend's channel as well.
You are a very hard working lady Ejoy and I’m happy for you because you are happy. I wish I could do videos of my work as well just like you. You always show the pros and cons of your projects which give piece of mind if someone like me who is a beginner experience the issues. Where are you based if I may ask? Thanks for sharing 👍🏽
@@prempremglamourz1 believe me or not, when filming most of my videos, I just put my phone (yes, am only using my phone for filming 😊) on top of a packing tape, the thick one. Sometimes, im using my coasters, 3 of them, piled up. Put my phone on top of it, focus on whatever am doing and press record. If i want different angles, i just put it wherever possible 😂 like my small white drawer, small books, sometimes, just on the table, especially when I'm designing and wanted to focus on the letters. That's it 😊
@@EjoysArtSpace29 Wow 😮, that is unbelievable, you are so genius. I was still looking to get a tripod stand with light 💡 and trying to get money and buy a camera 🎥 for recording but you surprised me and save me money by your reply. But I don’t like long videos and I’m don’t know how to edit as well which is why I was looking on TH-cam channel and they are mentioning getting this camera or that stand with light. You are too good and open mind person. Thank you very much for all your informations. I wish to see you in person and give you a big hug 🤗.
@@prempremglamourz1 I've also got tripod and some clip on led light with camera handle, but I really prefer the angle when I just put my phone on a packing tape or piled up coasters 😁 Go get those stuffs if it'll make your life easier 😊 i wish you good luck Prem and thank you so much for always being here and supporting me. Hug you back❤️
Hello,wonder ful job,I am a fan of resin and l wovld like to know what type of paper do you print the names to apply them later to the resin ,The al the moment the cricut is out of my budget,
Hola d nuevo ,siento ser tan permanente,pero estoy mirando por Internet y no sé exactamente q papel pedir,me podrías decir por favor donde lo adquieres,me harías un gran favor,muchas gracias
I m having doubt.. Can moulds be dried if we left it at room temperature?.. Ya then heat gun is must for drying? 👀 How u printed the info on moulds.. Pls let me know! ❤👀
Yes they will cure even on room temperature. Heatgun is basically for the bubbles, not fkr drying. Please visit my channel fpr the Part 1 of making these souvenirs. It shows the layout and printing process. Thank you 😊
@@EjoysArtSpace29 just 1 more question, my mica powder has glitter shine in it and it sinks at the bottom. So upper park looks prettier. Does yours sinks at the bottom?
A torch will ruin molds. A heat gun doesn't get that hot, about 200° - much less than the oven, molds are designed to work in (up to about 450°). They're used for baking. A torch gets much hotter than that. Also, alcohol is bad for silicone molds, sorry to say. It will dry the mold out pretty quickly. The safest would be blowing through a straw. Next, would be a lighter, a heat gun, alcohol, then... that's all. A torch isn't even on the list. Also, a quick spray of mold release makes demolding easier and helps your molds stay shiny and last longer.
Thank you so much for these important information Miley. Will pin your comment so everyone can see 😊👍🏻
😘
@ Miley onDisney Thanks for this information Miley.
I subscribed. Hey Doming Queen 👑- have a happy Saturday and a great weekend ❤️❤️❤️❤️
Thank you so much for supporting me 😊
Brilliant and fantastic mam. U showed the process so well. Outstanding. Please keep posting more of such videos.
Thank you 😊 🎀 I've uploaded my other souvenir designs. Please check it out on my channel 🦋
Very very gorgeous!!!
Thank you 🎀 😊
Beautiful
Thank you 🎀 😊
Seriously thinking about trying this!! 🥰🥰🥰🙌
You need to 😊even once. Happy creating!
Good job🥰👍💐
Thank you 😊
ang lupet.. ang ganda ng finish product.
Thank you 😊
WOW! Those turned out absolutely beautiful! Great job!
Thank you so much Miley as always 😊❤️
Please visit and SUBSCRIBE to my very close friend's channel: th-cam.com/users/emilywillcreate
Thank you fellow crafters ❤️🌹
So beautiful!
Thank you 🎀 😊
Thanks dear for this
Welcome
Gorgeous as always
Thank you Nixon 😊
Thanks for sharing
welcome :) thank you for watching
These are truly a work of art, absolutely gorgeous!!!
thank you :)
Amazing! Im learning from you! Thanks!
I'm glad of help. Thank you 😊
Omg they are beautiful!!! You did such an amazing job!!! I’m
thank you :)
Another beautiful job!
Thank you as always Linda. Appreciated :)
Wow, the time you had in these, but the outcome is so beautiful 😍
Thank you 😊
It’s beautiful 😍
Thank you 😊
🤩🤩🤩🤩absolutely gorgeous🤩🤩🤩🤩wow❣️Thank you for teaching this. I subscribed a few videos ago😊cheers🥂Ontario Canada🎈stay well stay safe😷
thank you so much from Philippines :)
Beautiful 😍you are super talented ❤️
Thank you 😊
Pura delicadeza 💕
Thank you 😊
Wala aq masabi kundi 😲😲😲.. Napansin ko lng palaki n Community mo congrats po 😘😍.. Stay humble and generous as you share your ideas even the slightest but important on making resin projects,😊😊😊... Lets keep growing 😁😁😁
thank you sis :)
it's wonderful; i'm hoping you get more clients ate🎉❤️
Salamat Ian 😊❤️
Thank You for sharing your tips about using isopropyl alcohol.
Ang ganda po ng pagkakagawa. Elegante!
Thank you 😊
AWWWWWW YUNG "IM HAPPIER THAN BEFORE" JHJKXCHKLSDCKL :) GO BESH
Pagod pero masaya besh 😊 unlike sa work ntin now, pagod ka na nga, stressed ka pa mentally, physically at emotionally.
Thank you very much. You inspired me a lot to do resin work. I decided to open the shop on Instagram and Facebook and always visit your channel to see techniques I can apply. Many many thanks from my heart. ❤ Once you travel to Thailand, let me know if I can take care of you here. 😘😍
Thank you so much :) wish you good luck to your business ❤ Thailand is a beautiful country and I personally wanted to try the food there someday. Will surely let you know if I ever travel there. 😊
Don't see how I missed part 2 when I got a notification for this one. Anyway, your videos are so calming and will subscribe to your friend's channel as well.
Thank you so much Jaye 😊
beautiful work! Congratulations! how many cm is the mold?
Thank you 😊 it's 4' diameter
@@EjoysArtSpace29 thank you! 😘
You are a very hard working lady Ejoy and I’m happy for you because you are happy. I wish I could do videos of my work as well just like you. You always show the pros and cons of your projects which give piece of mind if someone like me who is a beginner experience the issues. Where are you based if I may ask? Thanks for sharing 👍🏽
Thank you so much Prem :) hoping too see your creations too 😊 I'm based in Philippines :)
@@EjoysArtSpace29 Thanks but don’t know how to start 😀.
@@prempremglamourz1 believe me or not, when filming most of my videos, I just put my phone (yes, am only using my phone for filming 😊) on top of a packing tape, the thick one. Sometimes, im using my coasters, 3 of them, piled up. Put my phone on top of it, focus on whatever am doing and press record. If i want different angles, i just put it wherever possible 😂 like my small white drawer, small books, sometimes, just on the table, especially when I'm designing and wanted to focus on the letters. That's it 😊
@@EjoysArtSpace29 Wow 😮, that is unbelievable, you are so genius. I was still looking to get a tripod stand with light 💡 and trying to get money and buy a camera 🎥 for recording but you surprised me and save me money by your reply. But I don’t like long videos and I’m don’t know how to edit as well which is why I was looking on TH-cam channel and they are mentioning getting this camera or that stand with light. You are too good and open mind person. Thank you very much for all your informations. I wish to see you in person and give you a big hug 🤗.
@@prempremglamourz1 I've also got tripod and some clip on led light with camera handle, but I really prefer the angle when I just put my phone on a packing tape or piled up coasters 😁
Go get those stuffs if it'll make your life easier 😊 i wish you good luck Prem and thank you so much for always being here and supporting me. Hug you back❤️
galing talagaa ateee!! 😍❤️
Thank you 😊
Wonderful..!
Where do you sell your products, not this one, but in general.. you have some online store or ?
mainly fb marketplace and my fb ppage
Hi! Where did you get that kind of mold? I want that too! 😁🤗
Hi. Shopee. Just search for 6-cavity Silicon mold
You can also find them in Amazon or Ali Express.
@@EjoysArtSpace29 thankyou!😘
Came out beautifully. But did you figure out how to make the labels. Or show up so much?? You can see the outline.
Thank you 😊 best way to make the labels is using cutting machine to make decals but I don't have it since it's very extensive
You’re really talented ! I love your work - do you have an idea of when you will begin shipping internationally ? ☺️
Thank you :) I'll update here if ever..
Amazing!can I know, How do you make the texts?
Thank you 😊here's the tutorial th-cam.com/video/WRlbpZVty34/w-d-xo.html
I hope they understand all of the detailed work this took and additionally buy you a Cricut Maker III.
Thank you miley :) am hoping too
Hello,wonder ful job,I am a fan of resin and l wovld like to know what type of paper do you print the names to apply them later to the resin ,The al the moment the cricut is out of my budget,
I think she mention in her upload of her second episode my dear😊
It's Transparent Vinyl Sticker Sheet 😊
Thank you Magdaline 😊
Hola d nuevo ,siento ser tan permanente,pero estoy mirando por Internet y no sé exactamente q papel pedir,me podrías decir por favor donde lo adquieres,me harías un gran favor,muchas gracias
Quise decir pelma
Mine are not coming out shining, I think is the mold which I purchase in Amazon. Can you recommend one for me? thanks
Buy the 3-cavity Silicon mold for baking
GRAAAAABEEEEEH SDBBDHDHSHS 😭😭😭😭😭😭😭😭😭 SOBRANG SALAMAT SA PAGFEATURE 😭
Welcome besh. Sana makatulong kahit pano 😊
How to get the liquid silicone you put in the molding?
It will harden and you leave it there
I m having doubt..
Can moulds be dried if we left it at room temperature?.. Ya then heat gun is must for drying? 👀
How u printed the info on moulds.. Pls let me know! ❤👀
Yes they will cure even on room temperature.
Heatgun is basically for the bubbles, not fkr drying.
Please visit my channel fpr the Part 1 of making these souvenirs. It shows the layout and printing process. Thank you 😊
Where did you get your molds
Please check the video description. Thank you 😊
I so loved it ❤️❤️..
Your work is so neat n clean.
Do you ship to India ??
Thank you 😊 I regret to tell you that I don't ship internationally yet
@@EjoysArtSpace29 ❤️..
It will be great from u if u do so ❤️
@@butterfly21vanessa90 it's actually very expensive on my part...apologies
Where can I find those types of molds
Amazon, temu, Ali Express
Search for 6-cavity cake mold
Is this step more better result than when u do doming?
Yes.
@@EjoysArtSpace29 just 1 more question, my mica powder has glitter shine in it and it sinks at the bottom. So upper park looks prettier. Does yours sinks at the bottom?
@@shichochino yes. What you need to do is let the resin become thicker before your pour it on your mold so the glitters will not sink
@@EjoysArtSpace29 awesome! Thank u so much!💙💙
@@shichochino welcome. Good luck
Hi! May I ask how much is your SRP for each coaster? Thanks for the reply
hi. Php150 per piece
GRABEH BESH YUNG QUALITY CONTROL, PULIDONG PULIDOOOO
Thank you besh 😊 kailangan eh, pang - souvenirs itu 😁
How long did it take to make 50 and with how many molds?? My daughter wants me to make 250!!
😮 I don't know the answer, but good luck!!!
I replied to your comment on fb page 😊
@@kindredcelebrations I completely understand. 250pcs. is no joke
@@EjoysArtSpace29 what's your FB? I'm also curious about the answer!
@@kindredcelebrations last order I've got for this is 80pcs.
I used 4 sets of 3-cavity Silicon cake mold.
I finished 80pcs. in 3 weeks
What temperature should the room be?
21-24°C or 70-75°F
Hi po. Where did you buy the molds po?
Shopee
Usually how much po Ang cost nito if benta sa market? I want an idea
In 200g how many resin arts ang magagawa?
In 200g How many resin arts will make?
Depende po sa gagawin nyo. Iba-iba po kasi ang shape at size ng mga Silicon molds
OH MY GEEEEEEEEEH 😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭
Ano ba yan iyakin 😂🤣
Hello po.. Paano po gawin yung letter keychain na parang baliktad po ang mold?? hehehe. meron kasi ako nakita sa tiktok hehe.
Hello. Mauuna po ilalagay ung designs ksi po ung ilalim ang magiging harapan kapag dinemold na.
ay ganun po. pwde po gawa kayu nun ng video? hehehehe. 😬🤗
SALAMAT BEEEEEESSSSSSH 😭😭😭😭😭😭😭 SNSNSNSNSNSJSJDJD
Welcome besh 😊 alam ko nmang magaling ka talga. Kailangan lang ma-recognized 😊 bsta ituloy-tuloy mo lang besh. Wag sukuan.
Super ganda po!! Magkano niyo po sinesell yung ganyan maramihan?
Thank you 😊 Php130 per piece if bulk order of 50pcs up
How can we place orders to u?
I regret to tell you that I don't ship internationally yet.
Oh ok . May i know in which country are you in?
@@shareenahm Philippines 😊
How much per piece
Anong size ng mold mo sis, shoplink pls 😊
4' diameter
Going to follow friend too
Thank you 🎀 😊
Are u from india
Philippines 😊
Y porque imprimes las etiquetas al revés?🤔
Because it put it on backward facing mold
Que maravilloso, por fin un tutorial serio sin musica estúpida y bailaderas absurdas estoy fascinada
Thank you 😊
😭😭😭😭😭
😂😂😂😂😂
😭😭😭😭😭😭😭😭😭😭😭
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Stickers making shop instagram account??
Nope. Sorry